Pfaff creative 2140 Owner's Manual - Page 139

6. Embroidery Assistant 11 /•%% I 6-13 Pass the hoop underneath the embroidery foot by raising the presser foot lifter as far as possible. The retaining screw of the hoop must be facing you and the guide pin (53) must be pointing to the right. Slide the hoop along the machine's metal guide (49) behind the release lever (50), until the hoop engages. 3. Remove the hoop To remove the hoop, push down the release lever (50) of the embroidery unit and pull the hoop forwards and away. The presser foot lifter must be in top position. 4. Remove the embroidery unit Switch the machine off. First rotate the embroidery arm into the previous position. Raise the embroidery arm in the area of the recessed grip (52) and turn it, until it engages in normal position. i.e. parallel to the embroidery unit. Note: Before turning the hoop, make sure that the hoop holder doesn . protrude from the front arm edge. Press release lever (50) and remove the embroidery unit with a backward movement, holding it parallel to the machine.