Pfaff creative 2140 Owner's Manual - Page 141
Position, Embroidery
View all Pfaff creative 2140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
6. Embroidery Assistant 6-15 Metal clips For very fine fabrics or materials, which cannot be stretched taut enough in the hoop, we recommend using the four clips from the standard accessories to secure the outer and the inner hoop. The clips clamp the outer and inner hoop together, giving the fabric more support and tension. And that is what you do: Fitting: • Hoop the stabilizer and the fabric as usual. On the long sides of the hoop, there are four notches with two ribs each. Fasten the metal clips around the hoop from the top. Removing: • Push the clips away at the metal pin and remove them from the top. Position the Embroidery foot In the embroidery position, the embroidery foot is not positioned directly on the fabric, rather half way between the highest and lowest position. Press the foot control to lower the embroidery foot into this position.