Pfaff creative 2140 Owner's Manual - Page 39
Inserting, bobbin
View all Pfaff creative 2140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2. Machine Assistant 2-7 Inserting the bobbin Insert the full bobbin in the bobbin case. When doing so, pull the thread sideways through the slot on the bobbin case (A), then under the tension spring (B) until it rests in the small hook in the opening (see arrow). Check: When you pull the thread, the bobbin must turn clockwise. Checking the bobbin thread ten&on: Hold the bobbin case by the thread and move it sharply upwards. The bobbin case must slip downwards a little with each hand move ment. Correcting the tension Turn the adjusting screw (C) just a little to the left to decrease the bobbin thread tension. Turn the adjusting screw (C) just a little to the right to increase the bobbin thread tension. Inserting the bobbin case Lift the latch (F) on the bobbin case and push the bobbin case fully onto the pin (D) of the sewing hook. The opening (B) of the bobbin case must face upwards. Check: Pull the bobbin thread sharply The bobbin case must not fall out of the hook. Close the hook/bobbin cover.