Pfaff creative 2140 Owner's Manual - Page 42

2-10 Changing the presser foot Removing the presser foot: Set the needle at its highest position. Raise the presser foot and press the foot upwards at the front and downwards at the back at the same time until t snaps out of the presser foot holder (9). When disengaging buttonhole foot 5A, the runner must be pulled to the back and pressed upwards. Replacing the presser foot: Place the presser foot under the presser foot holder (9) so that the pins of the foot engage in the presser foot holder when the presser foot lifter (42) is lowered. Check that the presser foot has engaged properly by raising the presser foot lifter. 2. Machine Assistant Electronic knee lift Your Pfaff creative 2140 is provided with an electronic knee lift for regulating the presser foot height. 1. Push the knee lift fully into the provided hole (5) on the machine. Note: the flat side must face upwards. 2. Adjust the rectangular bar on the knee lift until it is positioned at a comfortable height for you. If you press the knee lift to the right, the presser foot will raise. Now you can guide the fabric with both hands. 3. To remove the knee lift, just pull it out of the hole. 1. 2. 3.