Pfaff creative 2140 Owner's Manual - Page 53

3. Getting started with your Pfaff creative 2140 Adjusting the tie-ott program The foflowing screen shows the window that opens when you touch the ' icon. This is a program for selecting tie-offs, cutting the thread and raising the presser foot. You can specify in the selection that the machine is to tie off at the start, or at the start and end. Touch the corresponding icon. If you have activated tie-off at the end, you can specify that the machine is to cut the threads and then raise the presser foot. If you have activated "Tie-off at end", you determine the length of the seam via the reverse key. When you open the window, "Tie-off beginning" and "Tie-off end" are not selected. They can be selected individually. 3-5 If you have selected the "Tie-off end" icon, the icons for the thread cutter and presser foot lifter are activated. You can tell the machine to cut the threads and raise the presser foot by touching the icons. The end of the seam will automatically tie-off. L9i 4 2 + - Thread cutter n Preoser toot fter Te-jf I progretn 1 Jonnç 45 2 w H - Tie-oil prorotr All options are selected in this window. If you touch"lie-off beginning", the beginning of your seam will be tied off with four stitches. 1 IflIng 45 - .. n Tie-oft You determine the end of the seam with the reverse button. The threads are cut and the presser foot is raised to its highest position. Touch to close the window and activate your settings. If you press the foot control immediately after modifying settings, all changes will be saved but the window remains open, allowing you to make further changes. If you touch the window is closed without the settings you have modified being saved; you interrupt the process.