Pfaff creative 2140 Owner's Manual - Page 57

3. Getting started with your Pfaff creative 2140 Twin needle The following illustration shows the window that opens when you have touched the icon. This function allows you to specify the width of the twin needle you will use. The stitch width will automatically be reduced to prevent needle breakage and allow you to sew decorative stitches with a twin needle. (See Chapter 6, page 6-9) 3-9 Free motion You can set our Pfaft creative 2140 for free motion sewing by touching Then select "Embroidery/Darning/Quilting". - 4' II, ['Ir,n i'. 'ni F n: n The icon is active. Touch the ÷1- icon to specify your twin needle width. The stitch is shown as it will sew. When you activate this function, the presser foot is lifted to embroidery height. Lower the feed dog and attach the embroidery foot or the quilt foot. When sewing, the speed by which you move the fabric decides the stitch length and stitch width. Touch the icon again and select "0", to return to normal sewing mode. Do not forget to raise the feed dog. Touch /' to close the window and save your settings. Press foot control to begin sewing immediately after altering ) settings. All changes will be saved but the window remains open, allowing you to make further changes. IC Touch to continue without saving any seftings. This function must be deactivated when you remove the needle from the machine, It remains active even after the stitch has been changed, including after the machine has been turned off and on again. Touch the icon again to deactivate the function. To exit the screen, touch This takes you directly back to the main menu, where you can select all stitches. Touch to return to the previous menu. Pop-up Direct Help is available for the individual functions and symbols. To use Pop-up Direct Help, touch a brief instructional description. Touch any icon for