Pfaff hobbylock 756 Owner's Manual - Page 34
TURNING, SQUARE, CORNERS, Outside, Corner, Inside
View all Pfaff hobbylock 756 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
* Fold the fabric with the wrong sides together and sew. * Press the pin tucks in the same direction. • TURNING SQUARE CORNERS (1) Outside Corner * Cut out approximately 2 cm (51/64 inch) from the corner, in line with the overedge seam edge. * Sew one stitch beyond point (A) and stop. * Raise needle and presser foot. * Pull the fabric to the rear of the machine just enough to release the thread caught on the finger of the throat plate. Note: Presser foot has been removed to show detail. * Turn the fabric and lower the presser foot so that the knife is positioned in line with the cut edge. * Pull slack threads up, then start to sew. (2) Inside Corner * Cut fabric at seam edge. 32
*
Fold
the
fabric
with
the
wrong
sides
together
and
32
sew.
*
Press
the
pin
tucks
in
the
same
direction.
•
TURNING
SQUARE
CORNERS
(1)
Outside
Corner
*
Cut
out
approximately
2
cm
(51/64
inch)
from
the
corner,
in
line
with
the
overedge
seam
edge.
*
Sew
one
stitch
beyond
point
(A)
and
stop.
*
Raise
needle
and
presser
foot.
*
Pull
the
fabric
to
the
rear
of
the
machine
just
enough
to
release
the
thread
caught
on
the
finger
of
the
throat
plate.
Note:
Presser
foot
has
been
removed
to
show
detail.
*
Turn
the
fabric
and
lower
the
presser
foot
so
that
the
knife
is
positioned
in
line
with
the
cut
edge.
*
Pull
slack
threads
up,
then
start
to
sew.
(2)
Inside
Corner
*
Cut
fabric
at
seam
edge.