Philips 107P40 User manual

Philips 107P40 Manual

Philips 107P40 manual content summary:

  • Philips 107P40 | User manual - Page 1
    electronic user's manual file:///D|/EDFU/crt_17/edoc/english/107P/manual.html [6/25/2003 10:03:50 AM]
  • Philips 107P40 | User manual - Page 2
    Maintenance • Troubleshooting • Regulatory into vents or cover them and prevent proper cooling of the monitor's electronic devices. q To avoid the risk of shock or permanent damage to Consult a service technician if the monitor does not operate normally when operating instructions of this manual are
  • Philips 107P40 | User manual - Page 3
    in our printed version. The sections are as follows: q Safety and Troubleshooting Information provides tips and solutions for common problems, and other related information you may need. q About This Electronic User's Manual gives overview of what information are included as well as notation icon
  • Philips 107P40 | User manual - Page 4
    Electronic User's Manual Notes, Cautions, and Warnings Throughout this guide for bodily harm and tells you how to avoid the problem. SMART HELP: This icon indicates helpful information when TO TOP OF THE PAGE ©2003 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction, copying
  • Philips 107P40 | User manual - Page 5
    monitors or other manufacturers monitors will not work with this special software. It is recommended that you install this software only on a Philips monitor designed to use it. These monitors can be identified by the LightFrame™ logo on the front of the monitor. This software is not designed
  • Philips 107P40 | User manual - Page 6
    Asked Questions (and answers) LightFrame™ Q: Is LightFrame™ 2 compatible with LightFrame™ 3? A: No. If you run LightFrame™; 1 or 2 software with a Philips LightFrame™ 3 monitor, nothing will happen. Q:Can I use LightFrame™ 3 software on my LightFrame™ 1 / 2 monitor. A:No for a LightFrame™ 1 or
  • Philips 107P40 | User manual - Page 7
    generation of the LightFrame™ feature introduced by Philips. In that version the user needs to manually turn on/off the feature and select the tell which version LightFrame™ my monitor can support? A:To check which version of LightFrame™ is supported by your monitor check the LightFrame logo which
  • Philips 107P40 | User manual - Page 8
    Q:What is wrong when my mouse changes into a light bulb with a red cross? A:Nothing. It just means but its functions are limited to manually highlighting the entire Netscape client window if my monitor comes with LightFrame™ 3? A: All Philips LightFrame™ 3 monitors display this logo on their front
  • Philips 107P40 | User manual - Page 9
    performs. Accustomed to working with the original LightFrame™ tray icon? No problem: It s still there and can be used to turn LightFrame™ high contrast, high brightness,anti-glare, anti-static, anti reflection, light transmission 38% B22 file:///D|/EDFU/crt_17/edoc/english/107P/PRODUCT/PRODUCT.HTM
  • Philips 107P40 | User manual - Page 10
    , scanners, etc.) Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can rely on the correctness of the colors shown on your screen. Important with
  • Philips 107P40 | User manual - Page 11
    Typical 77 W 0 % Green OFF Blanked No No < 2W 97% Yellow This monitor is ENERGY STAR® compliant. As an ENERGY STAR® Partner, PHILIPS has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. RETURN TO TOP OF THE PAGE Physical Specifications • Dimensions
  • Philips 107P40 | User manual - Page 12
    107P Product Information * Resolution 1280 x 1024, standard size, contrast max., brightness 50%, 9300°, full white pattern. * These information are subject to change without notice. RETURN TO TOP OF THE PAGE Pin Assignment The 15-pin D-sub connector (male) of the signal cable (IBM systems): Pin No.
  • Philips 107P40 | User manual - Page 13
    107P Product Information Rear View RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17/edoc/english/107P/PRODUCT/PRODUCT.HTM (9 of 9) [6/25/2003 10:03:56 AM]
  • Philips 107P40 | User manual - Page 14
    Installing your Monitor Installing your Monitor Front View • Rear View • 6G3B11 Multimedia Base (option) • PCUH411 USB Hub (option) Front View Power button switches your monitor on. OK button which when pressed will take you to the OSD controls Contrast hotkey. When the UP arrow is pressed, the
  • Philips 107P40 | User manual - Page 15
    Installing your Monitor UP and DOWN buttons are used when adjusting the OSD of your monitor Brightness hotkey. When the RIGHT arrow is pressed, the adjustment controls for BRIGHTNESS will show up. LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your
  • Philips 107P40 | User manual - Page 16
    Installing your Monitor 1. Power in - attach power cable here. 2. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17/edoc/english/INSTALL_2/INSTALL.HTM (3 of 3) [6/25/2003 10:03:56 AM]
  • Philips 107P40 | User manual - Page 17
    the On Screen Display What is the On-Screen Display? This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitors directly through an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when operating the monitor
  • Philips 107P40 | User manual - Page 18
    On-Screen Display RETURN TO TOP OF THE PAGE The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments. file:///D|/EDFU/crt_17/edoc/english/OSD/OSDDESC.HTM (2 of 3) [6/25/2003
  • Philips 107P40 | User manual - Page 19
    On-Screen Display RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17/edoc/english/OSD/OSDDESC.HTM (3 of 3) [6/25/2003 10:03:57 AM]
  • Philips 107P40 | User manual - Page 20
    Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED: WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland •
  • Philips 107P40 | User manual - Page 21
    Windows" logo means your Philips monitor fulfills the requirements and recommendations of the PC9x (97, 98, or 99) System Design Guide and passes stringent WHQL tests or want a USB hub. To give users freedom of choice, Philips provides an optional USB hub (type number PCUH411). The USB hub consists
  • Philips 107P40 | User manual - Page 22
    Frequently Asked Questions monitor to your Mac system. Please contact your dealer/reseller for details. 7. What is TCO? TCO is a Swedish abbreviation for the Swedish Confederation of Professional Employees. 8. What is MPR? MPR is a Swedish abbreviation for the Swedish National Board of Measurement
  • Philips 107P40 | User manual - Page 23
    followed by 'Monitor Control.' Select "All default selection' and choose your Philips monitor model from the default driver list. Plug and Play will automatically you. In DOS or Windows 3.1, you must first make sure your PC supports power saving. 11. What is refresh rate? "Refresh rate" describes the
  • Philips 107P40 | User manual - Page 24
    press OK button then select "Reset to factory settings" to restore all settings. 16. What is LightFrame™? LightFrame™ is a Philips technology breakthrough which offers a unique and revolutionary solution for boosting a monitor 's brightness and sharpness. With LightFrameTM, the user experiences
  • Philips 107P40 | User manual - Page 25
    . Today's state-of-the-art Philips monitors employ improved phosphors and are designed for high light output. LightFrame™ normally highlights photos warning that my monitor 'may not support LightFrame™ '. I am certain my monitor does. What is wrong? Only a Philips driver can determine if your monitor
  • Philips 107P40 | User manual - Page 26
    will happen when my system is no longer connected to a LightFrame™ enabled monitor - for example, when I take my notebook on the road? Philips exclusive LightFrame™ feature requires the combined operation of hardware that resides in your monitor and software installed on your system. It only works
  • Philips 107P40 | User manual - Page 27
    and width are unchanged. Only the monitor's height is increased by only 3 centimeters. 29. Where can I buy a multimedia base to incorporate with my Philips monitor? Please contact your dealer/reseller for details. 30. What does Auto Calibrate do? It makes your monitor perform better and last longer
  • Philips 107P40 | User manual - Page 28
    Auto Calibration takes place when a monitor receives a signal indicating an imminent switch to its sleep mode/stand-by mode. 34. Which models of Philips monitors are equipped with Auto Calibrate feature? Auto Calibrate is currently available in the new 201P, 201B and 109P. 35. The Main Menu displays
  • Philips 107P40 | User manual - Page 29
    the Moire effect. 39. What is CustoMax? CustoMax is proprietary Philips software that allows user to control parameter (e.g. Size, Color, this? q If the OSD menu is also missing a color, please contact service for details q Set color temperature to 9300 color coordination q Check the video cable
  • Philips 107P40 | User manual - Page 30
    to operate again. This is an intentional design and is an industry standard, not just for Philips monitors. Please be aware that not all models in the Philips range has this manual degauss function. Some models are built with an auto degauss feature which automatically degausses the monitor when
  • Philips 107P40 | User manual - Page 31
    OSD menu is also dim, please contact service for repair q Reset the monitor via the Philips monitor. Is this normal? This phenomenon can occur with Philips 107P, 109P and 201P monitors and is normal. Your monitor is using an Aperture Grille, which consists of fine vertical wires to align the electron
  • Philips 107P40 | User manual - Page 32
    to switch input A|B. q Try and repeat step 48 above. 50. Why does the picture disappear after I press the on/off button quickly? This is a unique Philips feature designed to preserve the life of your monitor. Please allow 5 seconds between powering off and on your monitor, your picture will then be
  • Philips 107P40 | User manual - Page 33
    Glossary Glossary A B C D E F G H I J K L M N O P Q R S T U V W X Y Z A Autoscan A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically horizontal and vertical frequencies of input signals with those of the installed video card. An autoscan monitor can
  • Philips 107P40 | User manual - Page 34
    black body radiating with the same dominant frequency as the source. Most Philips monitors offer the possibility of setting the color temperature to any desired light is reflected. Contrast is therefore reduced in conditions of high ambient light levels. Black Matrix tubes reflect less ambient light
  • Philips 107P40 | User manual - Page 35
    tube - the general term for all tubes in which one or more electron beams emitted by a cathode are periodically scanned across a phosphor screen by -ray tube is the TV and monitor picture tube. CustoMax Philips proprietary monitor control software that allows users to control parameters (e.g.,
  • Philips 107P40 | User manual - Page 36
    decays to demagnetize the tube. Some monitors offer a manual degaussing facility that can be activated at any time. without having to spend time readjusting the picture. It is currently available in most Philips monitors. Dot pitch The shortest distance between two phosphor dots of the same color
  • Philips 107P40 | User manual - Page 37
    Glossary Dot rate Frequency in MHz of the dot clock. It is a measure of the speed with which data is transferred between the video card and subsequent processing circuitry. Also known as video dot rate. RETURN TO TOP OF THE PAGE E Electromagnetic radiation standards International standards set to
  • Philips 107P40 | User manual - Page 38
    the electron beam to scan a picture onto the screen. Two kinds of flicker occur: line flicker caused by the electron light background), and can be very disturbing, especially for those who work regularly with displays contributing to eye strain, headaches, visual blurring, stress, etc. The problem
  • Philips 107P40 | User manual - Page 39
    Glossary Also called line frequency and expressed in kHz, it is the number of video lines written on the screen every second (from left to right). The higher the horizontal scanning frequency, the better the resolution (i.e., the higher the resolution and/or the higher the refresh rate). RETURN TO
  • Philips 107P40 | User manual - Page 40
    Glossary L Linearity The degree to measure the actual location of a pixel on the screen corresponds with its intended location. ( see figure ) Line frequency See Horizontal scanning frequency. Low-emission monitor A monitor that complies with international standards on radiation. See Electromagnetic
  • Philips 107P40 | User manual - Page 41
    On Screen Display) The feature that allows an end user to adjust screen performance and parameters of monitors directly through an on-screen instruction window. See CustoMax in CrystalClear section. Overscan The practice in which areas without useful video information are scanned outside the visible
  • Philips 107P40 | User manual - Page 42
    a picture on screen, phosphors are deposited on the inner surface of the picture-tube screen and excited into luminescence by the electron beam. Typical examples of phosphors are P22 medium short-persistence phosphor and EBU high-color-saturation phosphor. Pin-cushion Distortion See Geometric
  • Philips 107P40 | User manual - Page 43
    Glossary R Raster The area on screen that electron beam can reach. Refresh rate See Vertical scanning frequency. Resolution The number of pixels that can be displayed on the screen. The resolution is specified
  • Philips 107P40 | User manual - Page 44
    Anti-Static coatings Due to bombardment by beam electrons, monitor screens become electrically charged when in use screen by a spinning and spraying process. It operates by diffusing reflected light to blur images of light sources on the screen. To provide anti-static properties, the coating is
  • Philips 107P40 | User manual - Page 45
    Glossary The ARAS coating reflects only about 0.5% of the incident light. AGRAS (Anti-Glare anti-Reflection Anti-Static) coating. A combined anti-reflection, anti-glare, anti-static coating. Self-test function A monitor equipped with hardware or software
  • Philips 107P40 | User manual - Page 46
    Glossary SOG (Synchronization On Green) A properly functioning color monitor requires five kinds of signals: horizontal sync pulse, vertical sync pulse, red color signal, green color signal and blue color signal. Signals from a PC are transmitted to a monitor using one of three methods: 1. Separate
  • Philips 107P40 | User manual - Page 47
    of USB. Attachment points are referred to as ports. Each hub converts a single attachment point into multiple attachment points. The architecture supports concatenation of multiple hubs. The upstream port of a hub connects the hub towards the host. Each of the other downstream ports of
  • Philips 107P40 | User manual - Page 48
    Controller and Hub Repeater. The repeater is a protocol-controlled switch between the upstream port and downstream ports. It also has hardware support for reset and suspend/resume signaling. The controller provides the interface registers to allow communication to/from the host. Hub specific status
  • Philips 107P40 | User manual - Page 49
    as refresh rate). Vertical sync pulses A train of square shaped waveforms that define the start of a new frame. VESA Video Electronic Standards Association, a consortium of manufacturers formed to establish and maintain industry-wide standards for video cards and monitors. VESA was instrumental
  • Philips 107P40 | User manual - Page 50
    Glossary resolutions from 1280 x 1024 to 1600 x 1280, horizontal line frequencies up to 90 kHz and bandwidths up to 200 MHz. VIS (Viewable Image Size) The real screen dimensions that users can see measured diagonally. The VIS of a monitor is always less than the so called screen size of a monitor.
  • Philips 107P40 | User manual - Page 51
    prompted to save as either 'text' or 'source', choose 'source'). Printing instructions: To print the manual: 1. With the manual file open, follow your printer's instructions and print the pages you need. 107B.pdf English language manual 107C.pdf 107E.pdf 107G.pdf 107F.pdf 107P.pdf 107S.pdf
  • Philips 107P40 | User manual - Page 52
    Download and Print 107X.pdf file:///D|/EDFU/crt_17/edoc/english/DOWNLOAD/DOWNLOAD.HTM (2 of 2) [6/25/2003 10:03:58 AM]
  • Philips 107P40 | User manual - Page 53
    Troubleshooting • Regulatory Information • Other Related Information Common Problems Having trouble? Something not working? Before calling for help, try these suggestions. Having this problem rate of your computer. Refer to the Quick Start Guide or contact your computer vender for details. q The
  • Philips 107P40 | User manual - Page 54
    Troubleshooting rate of video signal at least to 75Hz. Refer to the Quick Start Guide or contact your computer vender for details. q Adjust Moire to zero. refer to the Consumer Information Centers list to contact your local Philips distributor. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17/edoc/
  • Philips 107P40 | User manual - Page 55
    Hinweis (nur Deutschland) • Philips End-of-Life Disposal • Information for UK only Safety Precautions and Maintenance • Troubleshooting • Other Related Information TCO of goods and services to the environment. The main problem, as far as computers and other electronics equipment are concerned,
  • Philips 107P40 | User manual - Page 56
    Regulatory Information TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). Approval requirements cover a wide range of issues: environment,
  • Philips 107P40 | User manual - Page 57
    also demands that mercury is not present in any of the electrical or electronics components associated with the labeled unit. CFCs (freons) The relevant TCO in the stratosphere, causing increased reception on earth of ultraviolet light with increased risks e.g. skin cancer (malignant melanoma) as a
  • Philips 107P40 | User manual - Page 58
    environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips
  • Philips 107P40 | User manual - Page 59
    .epa.gov.tw For help and service, please contact Consumers Information Center or F1rst Choice Contact Information Center in each country or the following team of Environmental specialist can help. Mr. Job Chiu - Environment manager Philips Electronics Industries (Taiwan) Ltd, Monitor Business Unit
  • Philips 107P40 | User manual - Page 60
    THE PAGE Energy Star Declaration PHILIPS 107P4* This monitor is equipped with a function for saving energy which supports the VESA Display Power Management and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
  • Philips 107P40 | User manual - Page 61
    le récepteur. q Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision. Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement. N'utiliser que des câbles RF
  • Philips 107P40 | User manual - Page 62
    is used near a radio or television receiver in a domestic environment, it may cause radio Interference. Install and use the equipment according to the instruction manual. Class B ITE RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17/edoc/english/107P/SAFETY/regs/regulat.htm (8 of 13) [6/25/2003 10
  • Philips 107P40 | User manual - Page 63
    Regulatory Information MIC Notice (South Korea Only) Class B Device Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas. RETURN TO TOP OF THE PAGE Polish Center for Testing and Certification Notice The equipment
  • Philips 107P40 | User manual - Page 64
    Regulatory Information RETURN TO TOP OF THE PAGE North Europe Information (Nordic Countries) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS
  • Philips 107P40 | User manual - Page 65
    Regulatory Information Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. RETURN TO TOP OF THE PAGE BSMI
  • Philips 107P40 | User manual - Page 66
    minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. RETURN TO TOP OF THE PAGE Information for UK only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an
  • Philips 107P40 | User manual - Page 67
    Regulatory Information have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A. Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere. How to connect a plug The wires
  • Philips 107P40 | User manual - Page 68
    Other Related Information Other Related Information Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Information for Users in the U. S. • Information for Users Outside the U.S Information for Users in the U. S. For units set at 115 V : Use a UL Listed
  • Philips 107P40 | User manual - Page 69
    6G3B11 Multimedia Base (option) 6G3B11 Multimedia Base (option) Front View • Rear View • Technical Specifications • Description of the Controls • Installing your Multimedia Base • Power adapter Installation Technical Specifications* • Output power • Bass Boost • Headphone connection • Microphone in
  • Philips 107P40 | User manual - Page 70
    6G3B11 Multimedia Base (option) D. Microphone jack Attach your microphone here. E. Audio In Connect this to the audio output of your PC. F. MIC Out Connect this to the microphone output of your PC. G. DC Input Connect power input here. RETURN TO TOP OF THE PAGE Installing your Multimedia Pedestal
  • Philips 107P40 | User manual - Page 71
    6G3B11 Multimedia Base (option) 2. To UN-INSTALL q Lift the back hook from the hole on the bottom plate of your monitor. q Slide out the pedestal the opposite direction (from when you installed it). RETURN TO TOP OF THE PAGE Power adapter Installation Installing the adapter There are two (2) ways
  • Philips 107P40 | User manual - Page 72
    6G3B11 Multimedia Base (option) RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17/edoc/english/INSTALL_2/mm_pede/mm_inst.htm (4 of 4) [6/25/2003 10:09:58 AM]
  • Philips 107P40 | User manual - Page 73
    USB Hub (Optional Feature) PCUH411 USB Hub (Option) Front View • Rear View • Installing your USB Hub Installing your USB Hub Installing on a conventional base. 1. Take out the USB hub from the box. 2. Take off the USB hub cover. 3. Slightly tilt and lift the base of your monitor. 4. Attach the USB
  • Philips 107P40 | User manual - Page 74
    USB Hub (Optional Feature) of the Multimedia Pedestal. 7. Attach the USB hub by sliding-in to the Multimedia base. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17/edoc/english/INSTALL_2/usbhub/usb_inst.htm (2 of 2) [6/25/2003 10:09:58 AM]
  • Philips 107P40 | User manual - Page 75
    under CONTRAST. RETURN TO TOP OF THE PAGE CONTRAST To adjust your screen's contrast, follow the steps bellow. Contrast is the difference between the light and dark areas on the screen. A 100% contrast is recommended. file:///D|/EDFU/crt_17/edoc/english/OSD/osd_cont.htm (1 of 25) [6/25/2003 10:10
  • Philips 107P40 | User manual - Page 76
    The OSD Controls 1) Press the or button on the monitor. The CONTRAST window appears. 2) Press the or button to adjust the contrast. 3) When the contrast is adjusted to the level desired, stop pressing the or button and after three seconds the CONTRAST window will disappear with the new adjustment
  • Philips 107P40 | User manual - Page 77
    The OSD Controls 3) Press the or button until the desired language is highlighted. 4) Press the button to confirm your selection and return to MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted... After returning to MAIN CONTROLS . . . Help . . . to continue to INPUT SIGNAL SELECTION,
  • Philips 107P40 | User manual - Page 78
    The OSD Controls RETURN TO TOP OF THE PAGE ZOOM ZOOM increases or decreases the size of the images on your screen. To adjust the ZOOM follow the steps below. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ZOOM is highlighted. 3) Press the button.
  • Philips 107P40 | User manual - Page 79
    The OSD Controls 5) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. After returning to MAIN CONTROLS . . . Help Smart . . . to continue to ADJUST HORIZONTAL, press the button until ADJUST HORIZONTAL is highlighted. Next,
  • Philips 107P40 | User manual - Page 80
    The OSD Controls 4) Press the or button to move the image to the left or right. 5) When the position is adjusted, press the to highlight SIZE. button to return to MAIN CONTROLS window, or press the 6) To adjust the horizontal size, press the or button. 7) When the size is adjusted, press the
  • Philips 107P40 | User manual - Page 81
    The OSD Controls RETURN TO TOP OF THE PAGE ADJUST VERTICAL ADJUST POSITION under ADJUST VERTICAL shifts the image on your screen either up or down. Use this feature if your image does not appear centered. ADJUST SIZE under ADJUST VERTICAL expands or controls the image on your screen, pushing it
  • Philips 107P40 | User manual - Page 82
    The OSD Controls 4) Press the or button to move the image up or down. 5) When the position is adjusted, press the to highlight SIZE. button to return to MAIN CONTROLS window, or press the 6) To adjust the vertical size, press the or button. 7) When the size is adjusted, press the CONTROLS
  • Philips 107P40 | User manual - Page 83
    The OSD Controls After returning to MAIN CONTROLS . . . Help . . . to continue to ADJUST SHAPE, press the button until ADJUST SHAPE is Smart highlighted. Next, start with step 3 under ADJUST SHAPE and follow the directions. . . . to exit completely, press the button RETURN TO TOP OF THE PAGE
  • Philips 107P40 | User manual - Page 84
    The OSD Controls 4) Press the button. The SIDE CURVE window appears. PINCUSHION should be highlighted. 5) To adjust the pincushion, press the or button. 6) When the pincushion is adjusted, press the to return to the ADJUST SHAPE window. button to highlight BALANCED or press the button file
  • Philips 107P40 | User manual - Page 85
    The OSD Controls 7) To adjust the balanced pincushion, press the or button. 8) When the balanced pincushion is adjusted, press the window. BACK TO MAIN WINDOWS will be highlighted. button to return to the ADJUST SHAPE 9) Press the button to return to the MAIN CONTROLS window, or press the SIDE
  • Philips 107P40 | User manual - Page 86
    The OSD Controls 3) Press the highlighted. button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be 4) Press the button to highlight ADJUST SIDE ANGLES. 5) Press the button. The SIDE ANGLES window appears. TRAPEZOID should be highlighted. file:///D|/EDFU/crt_17/edoc/english/OSD/
  • Philips 107P40 | User manual - Page 87
    The OSD Controls 6) To adjust the trapezoid, press the or button. 7) When the trapezoid is adjusted, press the button to highlight PARALLELOGRAM or press the button to return to the ADJUST SHAPE window. 8) To adjust the parallelogram, press the or button. 9) When the parallelogram is adjusted,
  • Philips 107P40 | User manual - Page 88
    The OSD Controls After returning to MAIN CONTROLS . . . Help ...to continue to ROTATE IMAGE, start with step 5 under ROTATE IMAGE and follow the directions. Smart ...to exit completely, press the button twice. ...to adjust only the PARALLELOGRAM, follow steps 1 - 4 above, then press the button
  • Philips 107P40 | User manual - Page 89
    The OSD Controls 5) Press the button. The ROTATE IMAGE window appears. ROTATE should be highlighted. 6) To adjust the rotation, press the or button. 7) When the rotation is adjusted, press the MAIN CONTROLS should be highlighted. button to return to the ADJUST SHAPE window. BACK TO 8) Press
  • Philips 107P40 | User manual - Page 90
    The OSD Controls desktop publishing, viewing a DVD from your DVD player or pictures on the World Wide Web, and playing video games. The third option is for PHOTO RETOUCH, which is for working with pictures you have imported into your computer and want to alter. When you select one of these options,
  • Philips 107P40 | User manual - Page 91
    The OSD Controls 4) Press the or button to highlight 9300K for GENERAL USE, 6500K for IMAGE MANAGEMENT, 5500K for PHOTO RETOUCH, or USER PRESET. 5) Once you have highlighted GENERAL USE, IMAGE MANAGEMENT, or PHOTO RETOUCH, press the button to confirm you selection and return to the MAIN CONTROLS
  • Philips 107P40 | User manual - Page 92
    The OSD Controls RETURN TO TOP OF THE PAGE RESET TO FACTORY SETTINGS RESET TO FACTORY SETTINGS returns everything in all the windows to factory presets. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until RESET TO FACTORY SETTINGS is highlighted. 3)
  • Philips 107P40 | User manual - Page 93
    The OSD Controls MAIN CONTROLS will be highlighted. After returning to MAIN CONTROLS . . . Help Smart . . . to continue to EXTRA CONTROLS, press the button until EXTRA CONTROLS is highlighted. Next, start with step 3 under EXTRA CONTROLS. . . . to exit completely, press the button. RETURN TO
  • Philips 107P40 | User manual - Page 94
    The OSD Controls 4) Press the button to highlight DEGAUSS. 5) To degauss your screen, press the button. Your screen will be degaussed, then the MAIN CONTROLS window will reappear. CLOSE MAIN CONTROLS will be highlighted. After returning to MAIN CONTROLS . . . Help Smart . . . to continue to
  • Philips 107P40 | User manual - Page 95
    The OSD Controls 3) Press the button. The EXTRA CONTROLS window appears. ADJUST MOIRE will be highlighted. 4) Press the button. The ADJUST MOIRE window appears. HORIZONTAL will be highlighted. file:///D|/EDFU/crt_17/edoc/english/OSD/osd_cont.htm (21 of 25) [6/25/2003 10:10:06 AM]
  • Philips 107P40 | User manual - Page 96
    The OSD Controls 5) To adjust the horizontal moire, press the or button. 6) When the horizontal moire is adjusted, press the button to highlight VERTICAL. 7) To adjust the vertical moire, press the or button. 8) When the vertical moire is adjusted, press the BACK TO MAIN CONTROLS will be
  • Philips 107P40 | User manual - Page 97
    The OSD Controls on the LIGHTFRAME function to activate in full screen mode. 1) Press button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until EXTRA CONTROLS is highlight. 3) Press the button. The EXTRA CONTROLS window appears. ADJUST MOIRE will be highlighted. 4)
  • Philips 107P40 | User manual - Page 98
    The OSD Controls 5) Pess the button. LIGHTFRAME will be activated. 6) Press button to go back to MAIN CONTROLS. Press button again to exit the OSD. RETURN TO TOP OF THE PAGE CLOSE MAIN CONTROLS file:///D|/EDFU/crt_17/edoc/english/OSD/osd_cont.htm (24 of 25) [6/25/2003 10:10:06 AM]
  • Philips 107P40 | User manual - Page 99
    The OSD Controls RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17/edoc/english/OSD/osd_cont.htm (25 of 25) [6/25/2003 10:10:06 AM]
  • Philips 107P40 | User manual - Page 100
    Philips helpdesk directly to benefit from your Philips F1rst Choice Warranty. This three-year service Philips F1rst Choice Warranty applies provided the product is handled properly for its intended use, in accordance with its operating instructions neglect; q Reception problems caused by signal
  • Philips 107P40 | User manual - Page 101
    inconvenience, we advise you to read the operating instructions carefully before contacting the Philips helpdesk. To solve your problem quickly, please prepare the following details before contacting the Philips helpdes q Philips type number q Philips serial number q Purchase date (copy of purchase
  • Philips 107P40 | User manual - Page 102
    The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and In case your Philips product is not working correctly or is defective, please contact your Philips dealer. In the event you require service whilst in another
  • Philips 107P40 | User manual - Page 103
    distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not
  • Philips 107P40 | User manual - Page 104
    ) 536-4171. Before Requesting Service... Please check your owner's manual before requesting service. Adjustments of the controls discussed there may save you a service call. TO GET WARRANTY SERVICE IN U.S.A., PUERTO RICO OR U.S. VIRGIN ISLANDS... Contact the Philips Customer Care Center phone number
  • Philips 107P40 | User manual - Page 105
    directly to benefit from your Philips F1rst Choice Warranty. This one-year service warranty entitles you to a swap model on-site within 48 hours of your call being received within the first year of purchase. If you have any problems with your monitor within the second or third year of purchase
  • Philips 107P40 | User manual - Page 106
    warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Attach it to this owner's manual and other cause not within the control of Philips Consumer Electronics. q reception problems caused by signal conditions or cable or antenna
  • Philips 107P40 | User manual - Page 107
    GET MORE INFORMATION? For more information, contact the Philips Customer Care Center by calling (877) 835-1838 (U.S.A. customers only) or (402) 536-4171. Before Requesting Service... Please check your owner's manual before requesting service. Adjustments of the controls discussed there may save you
  • Philips 107P40 | User manual - Page 108
    directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site within 48 hours of your call being received within the first year of purchase. If you have any problems with your monitor within the second or third year of purchase
  • Philips 107P40 | User manual - Page 109
    F1rst Choice Contact Information F1rst Choice Contact Information Telephone numbers: Austria Belgium Cyprus Denmark France Germany Greece Finland Ireland Italy Luxembourg The Netherlands Norway Portugal Sweden Switzerland Spain United Kingdom U.S.A. * Calls charged at local rates 01 546 575 603
  • Philips 107P40 | User manual - Page 110
    • Singapore • South Africa • Taiwan • Thailand • Turkey • Uruguay • Venezuela Eastern Europe CZECH REPUBLIC Philips Service V Mezihorí 2180 00 Prague Phone: (02)-6831581 Fax : (02)-66310852 HUNGARY Philips Markaszerviz. Kinizsi U 30-36Budapest 1092 Phone: (01)-2164428 Fax : (01)-2187885 POLAND
  • Philips 107P40 | User manual - Page 111
    Chilena S.A. Avenida Santa Maria 0760 P.O. box 2687Santiago de Chile Phone: (02)-730 2000 Fax : (02)-777 6730 COLOMBIA Industrias Philips de Colombia S.A.-Division de Servicio CARRERA 15 Nr. 104-33 Bogota, Colombia Phone: (01)-8000-111001 (toll free) Fax : (01)-619-4300/619-4104 MEXICO
  • Philips 107P40 | User manual - Page 112
    Caracas 1010-A Phone: (02) 2377575 Fax : (02) 2376420 Canada CANADA Philips Electronics Ltd. 281 Hillmount Road Markham Ontario, L6C 2S3 Phone: 800- 479-6696 Fax:905-887-3974 Pacific AUSTRALIA Philips Consumer Service. Customer Information Centre. 3 Figtree Drive Homebush Bay NSW 2140 Phone: CIC
  • Philips 107P40 | User manual - Page 113
    Ltd. Consumer Help Desk 2 Wagener Place, Mt.Albert P.O. box 1041 Auckland Phone: 0800 477 999 (Toll Free) Fax:0800 288 588 Asia BANGLADESH Philips Service Centre 100 Kazi Nazrul Islam Avenue Kawran Bazar C/A Dhaka-1215 Phone: (02)-812909 Fax : (02)-813062 CHINA SHANHAI No. 1102 wuding road, jing
  • Philips 107P40 | User manual - Page 114
    China Phone: 800 820 5128 (Toll Free) Fax:21-65610647 SHENZHEN Room 603, electronic BLD, No. 30 Shen nan zhong road, 518031 Shenzhen, P.R. China Phone: 800 820 5128 (Toll Free) Fax:21-65610647 CHENGDU Chengdu Sience-technolege university service BLD, No. 24 nan yi duan of Yi huan road, 410061 Chengdu
  • Philips 107P40 | User manual - Page 115
    )-712 1558 NEW DELHI Customer Relation Centre 68, Shivaji Marg New Dehli 110 015 Phone: (020)-712 2048 ext 2765 Fax:(020)-712 1558 INDONESIA Philips Group of Companies in Indonesia Consumer Information Centre Jl.Buncit Raya Kav. 99-100 12510 Jakarta Phone: (021)-7940040/7984255 Ext 1612 Fax : (021
  • Philips 107P40 | User manual - Page 116
    P.O.Box 7101 75730 KARACHI Phone: (021)-773 1927 Fax:(021)-772 1167 Philips Consumer Service Centre 168-F, Adamjee Road Rawalpindi Cantt Phone: (021)-773 1927 Fax:(021)-772 1167 PHILIPPINES Philips Electronics and Lighting Inc. 106 Valero St., Salcedo Village Makati, Metro Manilla. Phone: (02)-888
  • Philips 107P40 | User manual - Page 117
    Consumer Information Centre 26F, 66, Chung-Hsiao W. Road, Sec. 1 Taipei, Taiwan Phone: (02)-2382-4567 ,0800-231-099 Fax:(02)2382-3027 THAILAND Philips Electronics (Thailand) Ltd. Philips Service Centre 209/2 Sanpavut Road, Bangna, Bangkok 10260 Phone : (02)-652 8652 Fax:(02)-614 3531 Africa MOROCCO
  • Philips 107P40 | User manual - Page 118
    Middle East B.V. Consumer Information Centre P.O.Box 7785 DUBAI Phone: (04)-3353666 Fax : (04)-3353999 EGYPT Philips Egypt Consumer Information Centre 10, Abdel Rahman El Rafei Mohandessin - Cairo, P.O.Box 242 DOKKI Phone: (02)-3313993 Fax : (02)-3492142 file:///D|/EDFU/crt_17/edoc/english/
  • Philips 107P40 | User manual - Page 119
    WARRANTY REGISTRATION CARD Registering your product is an essential step to ensure that you receive all of the benefits you are entitled to as a Philips customer. So complete the information below in ink, and drop this card in the nearest mailbox. IMPORTANT - RETURN WITHIN TEN DAYS Month Day Year
  • Philips 107P40 | User manual - Page 120
    PHILIPS Warranty Card 8/16/02 12:38 PM Page 2 !1375415338! PO BOX 1533 DEPOSIT NY 13754-1533 TIME-DATED MATERIAL Please Open Promptly! a PLEASE APPLY FIRST
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

electronic user's manual
file:///D|/EDFU/crt_17/edoc/english/107P/manual.html [6/25/2003 10:03:50 AM]