Philips BM5B/37 User manual

Philips BM5B/37 Manual

Get Philips BM5B/37 PDF manuals and user guides View all Philips BM5B/37 manuals
Add to My Manuals
Save this manual to your list of manuals

Philips BM5B/37 manual content summary:

  • Philips BM5B/37 | User manual - Page 1
    Always there to help you Register your product and get support at www.philips.com/support BM5 Question? Contact Philips User manual
  • Philips BM5B/37 | User manual - Page 2
  • Philips BM5B/37 | User manual - Page 3
    4 Play 9 Play in single mode 9 Play in group mode 10 Control play 12 5 Other features 13 Listen to an external device 13 Update firmware 13 Reset group status 14 6 Product information 15 Specifications 15 7 Troubleshooting 16 8 Understand meanings of LED status 17 9 Notice 19
  • Philips BM5B/37 | User manual - Page 4
    to prevent operating and maintenance problems. WARNING:To reduce the risk Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. of time. m Refer all servicing to qualified service personnel. Servicing is required when the apparatus
  • Philips BM5B/37 | User manual - Page 5
    English Warning •• Never remove the casing of this unit. •• Never lubricate any part of this unit. •• Place this unit on a flat, hard and stable surface. •• Never place this unit on other electrical equipment. •• Only use this unit indoors. Keep this unit away from water, moisture and liquid-filled
  • Philips BM5B/37 | User manual - Page 6
    2 Your multiroom speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With the Philips izzylink speaker, you can: • listen to music from your Bluetooth- enabled devices;
  • Philips BM5B/37 | User manual - Page 7
    English Overview of the main unit abc d e f g a • Turn the speaker on or switch to Multiroom Active Mode/Standby Mode. b GROUP button/indicator • Press and hold to group with another multiroom speaker. • Press to exit or return to a group. • Flashes green during grouping. • Turns solid green after
  • Philips BM5B/37 | User manual - Page 8
    h AUDIO IN • Audio input socket (3.5mm) for an external audio device. i SOFTWARE UPGRADE • USB socket for speaker software upgrade only. j GROUP RESET • Press with a sharp object to restore factory defaults. k DC IN • Power socket. 6 EN
  • Philips BM5B/37 | User manual - Page 9
    English 3 Prepare Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the
  • Philips BM5B/37 | User manual - Page 10
    Switch to Multiroom Active Mode/ Standby Mode • In single mode, press to switch to Multiroom Active Mode. »» The volume indicator dims. »» All the other indicators turn off. • In group mode, press on any speaker in the group to switch to Multiroom Active Mode. »» The volume indicator on each speaker
  • Philips BM5B/37 | User manual - Page 11
    the speaker is not grouped with any other izzylink-compatible multiroom speakers. Instead, it is and a Bluetooth device is approximately 10 meters (30 feet). Philips BM5 XXX 1 Make sure that Bluetooth devices (refer to the user manual of the device). 3 When [Philips BM5 XXX] is displayed on your
  • Philips BM5B/37 | User manual - Page 12
    a paired Bluetooth device that does not support automatic reconnection, reconnect it with this speaker manually. To connect another Bluetooth-enabled device: waiting for connection Connected 10 EN Play in group mode Group mode: If you have more than one izzylink-compatible multiroom speakers, you
  • Philips BM5B/37 | User manual - Page 13
    2 Hold GROUP on a second speaker for 3 seconds (The slave). 3 Wait for 15 to 30 seconds for connection setup. 4 Repeat steps 1 to 3 to add more slave speakers one by one. Note •• You can only add slave speakers one by one. Each time when you add a slave speaker, first press and hold GROUP on the
  • Philips BM5B/37 | User manual - Page 14
    Switch to single mode A Press GROUP on the master to enter single mode. »» The slaves keep looking for the master until timeout in 15 minutes. »» You can create a new group with the slaves or press GROUP on a slave to enter single mode. • Press GROUP on the master again to resume group mode. B Press
  • Philips BM5B/37 | User manual - Page 15
    IN DEMO socket is for sound demo only and does not support multiroom streaming. 1 Connect an audio cable with a 3.5 music on the external device (refer to its user manual). »» The speaker switches to AUDIO IN source automatically. www.philips.com/ suppor t. 2 Enter the model number to
  • Philips BM5B/37 | User manual - Page 16
    www.philips.com/suppor t XXXX 7 Do not remove the USB stick, and wait for around 3 to 4 minutes for completion of the firmware upgrade. »» At completion of firmware
  • Philips BM5B/37 | User manual - Page 17
    full range > 81dB/m/W +/- 3dB/m/W General information AC power Input: 100 - 120 V~ 50/60 Hz 0.5 A Operation Power Consumption Output: 5 V 2 A 10 W Power Consumption - M ultiroom Active Mode - Standby Mode Dimensions - M ain Unit (W x H x D) Weight - Main Unit < 2W
  • Philips BM5B/37 | User manual - Page 18
    try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support).When you contact Philips, make sure that the device is nearby and the
  • Philips BM5B/37 | User manual - Page 19
    English 8 Understand meanings of LED status ab cd (1) Group indicator status Off Flashing green Solid green Meaning The speaker is powered off. The speaker is in single mode. The speaker is grouping with its master/slave. The speaker acts as a slave and is disconnected from its master. The
  • Philips BM5B/37 | User manual - Page 20
    (4) Bluetooth indicator status Off Flashing blue Solid blue Meaning The speaker is powered off. The speaker acts as a slave in group mode. The speaker is grouping with its master/slave. The speaker is in pairing mode. The speaker is connected to a Bluetooth-enabled device. 18 EN
  • Philips BM5B/37 | User manual - Page 21
    and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there information, please contact your local authorities or visit www.recycle.philips.com. Environmental information All unnecessary packaging has been omitted.
  • Philips BM5B/37 | User manual - Page 22
    is requested by the respective licenses.This offer is valid up to three years after product purchase.To obtain source code, please contact [email protected]. If you prefer not to use email or if you do not receive confirmation receipt within a week after mailing to this email address, please
  • Philips BM5B/37 | User manual - Page 23
  • Philips BM5B/37 | User manual - Page 24
    been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. BM5_37_UM_V2.0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
www.philips.com/support
User manual
Always there to help you
Register your product and get support at
BM5
Question?
Contact
Philips