Philips CCB255AT99 User manual
Philips CCB255AT99 Manual
 |
View all Philips CCB255AT99 manuals
Add to My Manuals
Save this manual to your list of manuals |
Philips CCB255AT99 manual content summary:
- Philips CCB255AT99 | User manual - Page 1
Color TV with built-in VCR CCB255AT Owner's Manual Important! Return your Warranty Registration Card within 10 days. See why inside. - Philips CCB255AT99 | User manual - Page 2
As a member of the PHILIPS "family," you're entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT - Philips CCB255AT99 | User manual - Page 3
air pollution and lowers utility bills. SmartClockTM, SmartPictureTM, SmartLockTM, SmartSoundTM, Remote LocatorTM and ShowGuardTM are trademarks of Philips Consumer Electronics. Copyright 2000 Philips Consumer Electronics. All rights reserved. VCR Plus+® and PlusCode® are registered trademarks of - Philips CCB255AT99 | User manual - Page 4
Sleep Timer 52 Wake Up Timer 53 Closed Caption 54-55 Volume Bar/Smart Sound 56 Automatic Operation Features 57 SmartPicture/FM Radio 58 Remote Locator 59 Reminder 60 Index Search 61 Information You May Need Specifications 62 Glossary 63 Helpful Hints 64-65 Limited Warranty 66 Index 67 - Philips CCB255AT99 | User manual - Page 5
automatic head cleaning system. However, the video heads will eventually require cleaning or replacement. Only an authorized service center should perform this service. Helpful Hints • The remote control and its batteries are supplied. • Do not mix alkaline and manganese batteries. • Do not mix old - Philips CCB255AT99 | User manual - Page 6
6 Hooking Up the TV/VCR 1 Hook up your TV/VCR using one of the connections shown. A. Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna Connect a Cable signal or an antenna to the ANT(enna) Jack. ANT. ANT. B. Hooking Up Your TV/VCR With a Cable Box To view any channel, set the TV/VCR - Philips CCB255AT99 | User manual - Page 7
Hooking Up the TV/VCR (cont'd) 7 D. Hooking Up Your TV/VCR to Another Video Source (VCR or Camcorder) You may need this connection if you want to copy tapes or view tapes from a camcorder. Details are on page 32. Use an Audio cable to connect the AUDIO AUDIO/VIDEO OUT Jacks on VCR OUT - Philips CCB255AT99 | User manual - Page 8
TV/VCR, make sure batteries are in the remote control and the TV/VCR is hooked up correctly. The instructions on this page work only when you turn 10 instead.) 5 Use the CH(annel) m/n button or the Number buttons on the remote control to select a TV/VCR channel. Use the VOL(ume) m/n button to adjust - Philips CCB255AT99 | User manual - Page 9
to select PRIM. SETUP. Then, press the F.FWD/B button. PRIMARY SETUP > SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY/v button or the STOP/w button to choose SELECT LANGUAGE. Then, press the - Philips CCB255AT99 | User manual - Page 10
to select PRIM. SETUP, then press the F.FWD/B button. PRIMARY SETUP > SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 1 SLEEP/WAKE UP SPEED REC/OTR MEMORY PAUSE/STILL REW MENU PLAY STOP F.FWD STATUS - Philips CCB255AT99 | User manual - Page 11
Automatic Channel Setup (cont'd) 11 Adding/Deleting Channels 1 Press the COMBI button, then press the MENU button. TO ADJUST PRESS { / B CH123 > CHANNEL FM ANTENNA SMARTLOCK REVIEW EXIT PRIM. SETUP SAVED 2 1 Press the PLAY/o button or the STOP/p button to select CHANNEL. TO ADJUST PRESS { / - Philips CCB255AT99 | User manual - Page 12
SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY/v SET CLOCK. Then, press the F.FWD/B button. SET CLOCK > AUTO CLOCK SET MANUAL CLOCK DAYLIGHT SVG.TIME SET TIME ZONE [AUTO] [ON] [ON] TO CONTINUE - Philips CCB255AT99 | User manual - Page 13
the hour(s) and two Number buttons for the minute(s). Then press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2. SET MANUAL CLOCK TIME 09 : 30 PM MONTH TO CORRECT PRESS CLEAR TO END PRESS EXIT 5-6 POWER EJECT SLEEP/WAKE UP SPEED REC/OTR MEMORY PAUSE/STILL - Philips CCB255AT99 | User manual - Page 14
SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY CLOCK. Then, press the F.FWD/B button. 1 SET CLOCK > AUTO CLOCK SET MANUAL CLOCK DAYLIGHT SVG.TIME SET TIME ZONE [AUTO] [ON] [ON] TO CONTINUE - Philips CCB255AT99 | User manual - Page 15
page 28. • You cannot use the AUTO CLOCK feature if you don't receive a PBS channel that carries a time signal in your area. Set the clock manually. - Philips CCB255AT99 | User manual - Page 16
SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY/v SET CLOCK. Then, press the F.FWD/B button. SET CLOCK > AUTO CLOCK SET MANUAL CLOCK DAYLIGHT SVG.TIME SET TIME ZONE [AUTO] [ON] [ON] TO CONTINUE - Philips CCB255AT99 | User manual - Page 17
Setting the Clock (cont'd) 17 5 Press the PLAY/v button or the STOP/w button to select SET PBS CH. MANUAL. Then, press the F.FWD/B button. 7 Wait for the TV/VCR to find the time. AUTO CLOCK (PBS) CH 02 TIME DATE SELECT CHANNEL NUMBER TO - Philips CCB255AT99 | User manual - Page 18
SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY SET CLOCK. Then, press the F.FWD/B button. SET CLOCK > AUTO CLOCK SET MANUAL CLOCK DAYLIGHT SVG.TIME SET TIME ZONE [AUTO] [ON] [ON] TO CONTINUE - Philips CCB255AT99 | User manual - Page 19
SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY/v SET CLOCK. Then, press the F.FWD/B button. SET CLOCK > AUTO CLOCK SET MANUAL CLOCK DAYLIGHT SVG.TIME SET TIME ZONE [AUTO] [ON] [ON] 1 POWER - Philips CCB255AT99 | User manual - Page 20
remote control. 1 Turn on your Cable Box/DBS. Point the remote it. CABLE BOX CODES ARCHER..01, 05, 06, 44 MAGNAVOX 26 SAMSUNG 05, COMPONENTS EAGLE...........26, 40, 62 PHILIPS.........07, 23, 50 42, 44 97 UNIKA 01, 44 GENERAL ELECTRIC REALISTIC 44 UNIVERSAL.....42, 44, 52 01, 57 RECOTON - Philips CCB255AT99 | User manual - Page 21
Zenith Cable Box, press Number buttons 0, 7. 6 Repeat step 1. If the remote control works your Cable Box/DBS, you're finished. If the remote control still doesn't work your Cable Box/DBS, repeat steps 2-5, using a different code for your brand, if available. POWER EJECT SLEEP/WAKE UP SPEED REC - Philips CCB255AT99 | User manual - Page 22
off. Press to activate the Remote Locator. Details are on page 59. Wireless Remote Sensor Receives a signal from your remote control so you can operate REC EJECT REW PLAY F.FWD OTR VOLUME CHANNEL EARPHONE REC(ord) Light This light appears during a recording. It flashes slowly when the TV/VCR - Philips CCB255AT99 | User manual - Page 23
Rear Panel 23 ANT. AC Power Cord Connect to a standard AC outlet to supply power to the TV/VCR. ANT(enna) Jack Connect your antenna or cable here. Details are on page six. Antenna Hole Connect the stem of an indoor antenna here. Details are on page six. - Philips CCB255AT99 | User manual - Page 24
24 Remote Control Buttons EJECT Button Press to eject the tape. SPEED Button Press to select the recording speed (SP or SLP). POWER Button Press to turn - Philips CCB255AT99 | User manual - Page 25
Remote Control Buttons (cont'd) 25 PAUSE/STILL Button During recording, press to temporarily stop the recording. Press again a shaded description also may operate features of your Cable Box/DBS. • Buttons that are shaded in the illustration light up for five seconds when you press any button on the - Philips CCB255AT99 | User manual - Page 26
26 Adjusting the Picture Controls Follow these steps to adjust the TV/VCR's brightness, picture, color, tint, and sharpness. 1 Press the COMBI button, then press the MENU button. K K TO ADJUST PRESS { / B > BRIGHTNESS PICTURE COLOR TINT SHARPNESS CHANNEL 2 Press the PLAY/v button or the STOP/w - Philips CCB255AT99 | User manual - Page 27
Adjusting the Picture Controls (cont'd) 27 BRIGHTNESS PICTURE COLOR TINT SHARPNESS Press the REW(ind)/{ button to decrease a picture control. Press the F.FWD/B button to increase a picture control. Decrease decreased brightness decreased contrast paler more purple softer Increase increased - Philips CCB255AT99 | User manual - Page 28
28 On-Screen Status Displays A status display will appear when you press the STATUS/EXIT button or certain function buttons. The contents of the status display will vary. To choose the status display mode, follow the steps below. If you select STATUS ON, then select COUNTER ONLY OFF: q Whenever you - Philips CCB255AT99 | User manual - Page 29
Playing 29 Follow the steps below to play a tape. 1 Insert a tape in the TV/VCR. The power will come on. If the tape's record tab has been removed, playback should start automatically. 2 If playback does not start automatically, press the COMBI button, then press the PLAY/v button to start playback - Philips CCB255AT99 | User manual - Page 30
during recording.) 4 Press the REC(ord)/OTR button once to start recording. The REC(ord) light will glow. q If there is not a tape in the TV/VCR, NO CASSETTE flashes /STILL button again or the REC(ord)/OTR button. The REC(ord) light will glow. 6 To stop recording, press the STOP/w button. Tape - Philips CCB255AT99 | User manual - Page 31
right corner of the screen. Recording will begin immediately. The REC(ord) light will appear. OTR CH12 LENGTH 0:30 4 Press the STOP/EJECT button on , then press the CLEAR button, then press the STOP/w button on the remote control. Helpful Hints • To check the time remaining for an OTR after - Philips CCB255AT99 | User manual - Page 32
. The TV/VCR power will turn on automatically. 4 Point the TV/VCR remote control at the TV/VCR. Press the COMBI button, then press Number buttons 0, 0 so that A/V IN appears on the screen. 5 Point the TV/VCR remote control at the TV/VCR. Press the SPEED button until the desired tape speed - Philips CCB255AT99 | User manual - Page 33
Defeat Recording 33 Follow the steps below to prevent accidental recording. 1 Press the COMBI button, then press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B 2 Press the PLAY/v button or the STOP/w button to select VCR SETUP, then press the F.FWD/B - Philips CCB255AT99 | User manual - Page 34
you are using the AUTO CLOCK feature. Details are on pages 14-17. If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if the timer recording was scheduled to take place during the power - Philips CCB255AT99 | User manual - Page 35
example, for 9:30 PM, press 09, 30, 2. ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON - - : - - TO CORRECT PRESS CLEAR TO END PRESS EXIT 7 Follow the instructions in step 6 to set the recording's stop time. (AM or PM will be set automatically.) ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON 09:30 - Philips CCB255AT99 | User manual - Page 36
11 Press the POWER button to turn off the TV/VCR power. The REC(ord) light will flash slowly if a tape is in the TV/VCR. If you forget to the TV/VCR screen two minutes before a timer recording starts. The REC(ord) light will blink rapidly until you turn off the power for the recording. Insert a tape - Philips CCB255AT99 | User manual - Page 37
you are using the AUTO CLOCK feature. Details are on pages 14-17. If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if the timer recording was scheduled to take place during the power - Philips CCB255AT99 | User manual - Page 38
, if applicable (you can request one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in your TV guide or the TV listings of your local newspaper. NOTE: If you are using a Cable Box/DBS, the Cable/TV channel must be 03 or 04 - Philips CCB255AT99 | User manual - Page 39
Setting Up the VCR Plus+ Programming System (cont'd) 39 2 Now, compare the channel numbers you have written in the VCR PLUS+ CH. and CABLE/TV CH. columns. You'll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that do - Philips CCB255AT99 | User manual - Page 40
below to program a timer recording using the PlusCode programming numbers in your TV guide. Before you begin, make sure: q The clock has been set. If DEFEAT RECORDING is set to ON. Details are on page 33. • If CODE ERROR flashes after you enter the PlusCode programming number and press the VCR PLUS+/ - Philips CCB255AT99 | User manual - Page 41
6 Press the POWER button to turn off the TV/VCR power. The REC(ord) light will flash slowly if a tape is in the TV/VCR. If you forget to the TV/VCR screen two minutes before a timer recording starts. The REC(ord) light will blink rapidly until you turn off the power for the recording. 6 4 POWER - Philips CCB255AT99 | User manual - Page 42
42 Real-Time Counter Memory Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later. 1 Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape. 2 Press the STATUS/EXIT button. The real-time counter - Philips CCB255AT99 | User manual - Page 43
Repeat Play 43 Follow the steps below to program the TV/VCR to play a tape over and over. 1 Press the COMBI button, then press the MENU button. 2-3 POWER EJECT SLEEP/WAKE UP SPEED REC/OTR MEMORY PAUSE/STILL > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B 2 Press - Philips CCB255AT99 | User manual - Page 44
44 A-B Repeat Play Follow the steps below to program the TV/VCR to play the material between two specified points (A and B) on a tape over and over again. 1 Insert a tape in the TV/VCR. 2 Press the COMBI button, then press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER - Philips CCB255AT99 | User manual - Page 45
A-B Repeat Play (cont'd) 45 6 Press the STATUS/EXIT button to remove the menu. AB REPEAT will appear on the screen. Beneath it, the letter A will flash beside the real-time counter. . 7-8 POWER EJECT SLEEP/WAKE UP SPEED REC/OTR MEMORY PAUSE/STILL A-B REPEAT A 0:12:34 7 Play, fast forward, - Philips CCB255AT99 | User manual - Page 46
46 Playback Options Forward and Reverse Searching (SP/LP/SLP) 1 During tape playback, press and release the F.FWD/B button or the REW(ind)/{ button. A fast forward or reverse picture search will begin. 2 To return to normal playback, press the PLAY/v button. Super High Speed Searching (LP/SLP) 1 - Philips CCB255AT99 | User manual - Page 47
Blue Background 47 If you want the TV screen to be solid blue when a weak signal is received, set BLUE BACKGROUND to ON. The screen will be blue and the sound will be muted. Or, if you want to receive the weak signal, set BLUE BACKGROUND to OFF. When you select a channel that is receiving a weak - Philips CCB255AT99 | User manual - Page 48
SMARTLOCK. Then, press the F.FWD/B button. SMARTLOCK _ ___ Enter Your Access Code 2,4 POWER EJECT SLEEP/WAKE UP SPEED REC/OTR MEMORY PAUSE/STILL REW MENU rating of the tape is blocked. • If you enter the access code once, you may change channels without seeing the "CHANNEL XX BLOCKED" - Philips CCB255AT99 | User manual - Page 49
..." or "PLAYBACK BLOCKED..." message appears and you want to view this programming, enter your access code. The channel/tape will remain blocked until you enter the correct code. If you do not know the code, you must select another channel using the CH(annel) o/p buttons or press the STOP/p button - Philips CCB255AT99 | User manual - Page 50
Number buttons to enter your desired access code in the New Code space. Then, enter the same code in the Confirm Code space. Your new access code should be recorded. You will return to the SMARTLOCK menu. New Code _ ___ Confirm Code _ _ _ _ 6 Press the STATUS/EXIT button. 1 2,4 POWER EJECT - Philips CCB255AT99 | User manual - Page 51
SmartLock (cont'd) 51 To check the SmartLock settings, follow these steps. 1 Press the COMBI button, then press the MENU button. > REVIEW EXIT PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION PRESS B 2 Press the PLAY/v button or the STOP/w button to select 1 REVIEW. Then, press the F.FWD/B button so - Philips CCB255AT99 | User manual - Page 52
52 Sleep Timer Use the sleep timer to program the TV/VCR to shut off in a certain amount of time. 1 Press the COMBI button, then press the SLEEP/WAKE UP button. TO ADJUST PRESS { / B -TIMER- > SLEEP OFF WAKE UP ON-TIME 1 2 Press the PLAY/o button or the STOP/p button to select SLEEP. Then - Philips CCB255AT99 | User manual - Page 53
Wake Up Timer 53 The Wake Up Timer turns on the TV/VCR automatically at a specified time within the next 24 hours. You may set the TV/VCR to turn on at a TV channel (the channel at which the TV/VCR was set last) or with VCR playback. To set the Wake Up Timer, follow the steps below. Before you - Philips CCB255AT99 | User manual - Page 54
captioning is not broadcast, you cannot receive it. This does not indicate a problem with the TV/VCR. Refer to your area's TV program listings for the q TEXT1 and TEXT2 display half-screen text (such as a channel guide, schedule, or announcement). q CAPTION MUTE displays standard closed captions ( - Philips CCB255AT99 | User manual - Page 55
page 28. • Abbreviations, symbols, and other grammatical shortcuts are often used in order to keep pace with the on-screen action. This does not indicate a problem with the TV/VCR. • When you change channels, the closed captions may be delayed for a few seconds. • When you adjust the volume or mute - Philips CCB255AT99 | User manual - Page 56
to select PRIM. SETUP. Then, press the F.FWD/B button. PRIMARY SETUP > SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK REMOTE LOCATOR SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY/v button or the STOP/w button to select VOLUME BAR, then press the F.FWD - Philips CCB255AT99 | User manual - Page 57
, however, you may get a better picture using the manual tracking controls (see below). Manual Tracking To adjust the tracking manually, press the CHANNEL o/p buttons on the TV/VCR or the TRACKING m/n button on the remote control. Tracking returns to Automatic Tracking Adjustment when a tape - Philips CCB255AT99 | User manual - Page 58
58 SmartPicture/FM Radio SmartPicture The SmartPicture feature allows you to improve the TV/VCR's picture when viewing sports, a movie, or video games; to improve the picture when the antenna/cable signal is weak; or to reset the picture controls to their original settings. 1 Press the COMBI button - Philips CCB255AT99 | User manual - Page 59
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. YOUR REMOTE LOCATOR CODE HAS BEEN CHANGED NEW CODE IS 3 TO END PRESS EXIT 6 Press the STATUS/EXIT button. Helpful Hint • The volume will be delayed while - Philips CCB255AT99 | User manual - Page 60
60 Reminder The channel number will remain on the screen at all times when you set REMINDER to ON. The exception is when closed captioning is selected or during tape playback. Set REMINDER to ON or OFF by following the steps below. 1 Press the COMBI button, then press the MENU button. TO ADJUST - Philips CCB255AT99 | User manual - Page 61
This feature allows you to index the starting points of programs that you have recorded on a tape. Then, you can easily rewind or fast forward to that point. Example: If you are watching program number 4 and you want to fast forward to program number 7, skip three programs. CURRENT PLAYBACK PROGRAM - Philips CCB255AT99 | User manual - Page 62
62 Specifications General CRT: 25-inch in line gun Television system: NTSC-M Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard Video Heads: Four heads Tape width: 1/2 inch (12.65 mm) Tape speed SP: 33.35 mm/sec. LP: 16.67 mm/sec. SLP: 11.12 mm/sec. Operating - Philips CCB255AT99 | User manual - Page 63
AUDIO In Jack: jack located on the front of the TV/VCR which is used to record audio from another source. Automatic Channel Setup: process in which the TV/VCR scans all available channels and places the ones you receive in its memory. Then, when you push the CHANNEL o/p buttons, you only scan - Philips CCB255AT99 | User manual - Page 64
problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.) The timer recording - Philips CCB255AT99 | User manual - Page 65
to OFF. Details are on page 28. • Make sure closed captioning is available for the program. Refer to the TV listings in your local newspaper. Remote control does not operate TV/VCR. • Press the COMBI button, then try the other TV/VCR buttons. • Aim the - Philips CCB255AT99 | User manual - Page 66
RENEWED 90 DAY LIMITED WARRANTY - Philips CCB255AT99 | User manual - Page 67
29 power button 22, 24 cord 7, 23 real-time counter memory . . .42 rear panel 23 rec/otr button 22, 25 rec(ord) light 22 recording 30 reminder 60 remote control buttons 24-25 using 5 locator 59 sensor 22 repeat play 43 rerecording 32 rew(ind) button 22 rew(ind)/{ button . . . . . .25 - Philips CCB255AT99 | User manual - Page 68
F.FWD CLEAR 3 CH. Remote Control 4835 218 37284 Three coded for easy connection #M61103 Three Cassette Storage Cases (plastic) Fits VHS and Beta cassettes #M61104 This owner's manual is made of recyclable materials. Remember to recycle! As an ENERGY STAR® Partner, Philips Consumer Electronics
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
 |
 |
Owner’s Manual
Important!
Return your Warranty Registration
Card within 10 days. See why inside.
Color TV with built-in VCR
CCB255AT