Philips DVD741VR User manual
Philips DVD741VR Manual
 |
View all Philips DVD741VR manuals
Add to My Manuals
Save this manual to your list of manuals |
Philips DVD741VR manual content summary:
- Philips DVD741VR | User manual - Page 1
Recorder Owner's Manual DVD741VR Important! Return your Warranty Registration Card within 10 days. See why inside. Read this manual first! Congratulations on purchasing this Philips product. We've included everything you need to get started. If you have any problems, Philips Representatives can - Philips DVD741VR | User manual - Page 2
As a member of the PHILIPS "family," you're entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT - Philips DVD741VR | User manual - Page 3
. Department of Health and Human Services (DHHS) Certification: Complies with in accordance with the instructions, may cause harmful 820-40 of the National Electrical Code, which provides guidelines for proper DVD741VR Trade Name: Philips Responsible Party: Philips Consumer Electronics - Philips DVD741VR | User manual - Page 4
Cassette Playback 16 Disc Playback 17 Basic DVD/VCR Controls Display Panel (DVD 18 Display Panel (VCR 19 Front Panel 20 Rear Panel 21 Remote Control Buttons 22-23 Disc Playback Features Disc Menus 48 Fast Forward/Reverse Search 49 Specific Title/Chapter Playback, Specific Time Playback 50 - Philips DVD741VR | User manual - Page 5
white tips) and Video (yellow tips) cables When referring to this manual, remember... VCR Indicates the feature is available on Video Cassettes when the DVD, then DISC/MENU on the remote control. Details are on page 48. DVD Player Setup Menu... Some instructions explain how to use the DVD Player - Philips DVD741VR | User manual - Page 6
. To play a DVD, make sure it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will system and is compatible with existing Video Home System (VHS) equipment. Philips recommends you use only Video Cassettes that have the mark.The use - Philips DVD741VR | User manual - Page 7
features. Details are on page 11. Before you begin... G Refer to the manuals of your TV, Cable Box, Stereo Receiver, or other devices as necessary. Note etc.These channels often are located near channel 00. See your TV owner's manual for details. If you do not see the DVD or VCR playback on the - Philips DVD741VR | User manual - Page 8
H9231CD(EN).QX3 02.9.5 7:13 PM Page 8 8 Hookups (cont'd) DVD/VCR to TV only Simplest connection using only supplied black RF coaxial cable This connection will let you use the features of both the VCR and the DVD Player. 1 Disconnect the antenna or cable from your TV and connect it to the ANT-IN - Philips DVD741VR | User manual - Page 9
OUTPUT SELECT to put the DVD/VCR in VCR mode. The green VIDEO light will appear on the front of the DVD/VCR 2) Press VCR/TV to choose VCR position.The green VCR/TV light will appear on the front of the DVD/VCR 3) Press VCR, then press the - Philips DVD741VR | User manual - Page 10
the VCR button, then press VCR/TV to choose VCR position. The green VCR/TV light will appear on the front of the DVD/VCR 3) Press CHANNEL/SKIP j/i (p/o) the VCR/TV button once to put the DVD/VCR in TV position.The VCR/TV light will go off. 5) Select the channel you want to watch at the Cable Box/DBS - Philips DVD741VR | User manual - Page 11
your TV. If you are using the RF coaxial cable for VCR or DVD playback, choose channel 3 or 4 at the TV. See your TV owner's manual for more details. Or, simply continue changing channels at the TV until you see VCR or DVD playback on the TV screen. 5 You are ready - Philips DVD741VR | User manual - Page 12
H9231CD(EN).QX3 02.9.5 7:13 PM Page 12 12 Hookups (cont'd) DVD/VCR to a Stereo and to a TV that has Component Video In jacks Antenna/Cable TV Signal DVD/VCR 1 ANT-IN ANT-OUT CH3 CH4 IN L AUDIO R DVD/VCR OUT COMPONENT VIDEO OUT DVD/VCR AUDIO OUT Y S-VIDEO L Cb OUT DIGITAL AUDIO OUT PCM - Philips DVD741VR | User manual - Page 13
H9231CD(EN).QX3 02.9.5 7:13 PM Page 13 Hookups (cont'd) 13 DVD/VCR to a TV and to a Stereo Receiver that is Dolby Digital-compatible Using Digital Audio connections 1 Antenna/Cable TV Signal DVD/VCR ANT-IN ANT-OUT CH3 CH4 VIDEO IN Back of TV (example only) IN L AUDIO R DVD/VCR OUT - Philips DVD741VR | User manual - Page 14
ends aligned as indicated. 3 Replace the battery compartment lid. Using the Remote Control G Point the remote control at the DVD/VCR's remote sensor (see 2 page 20) when using the remote control to operate the DVD/VCR. Do not point the remote control at the TV. G Do not put objects between the - Philips DVD741VR | User manual - Page 15
15 Before turning on your DVD/VCR, make sure batteries are in the remote control and the DVD/VCR and TV are connected correctly. G You cannot program briefly on the front of the DVD/VCR. The green VIDEO light, the VCR/TV light, and the Power light will appear on the front of the DVD/VCR. 2 Turn - Philips DVD741VR | User manual - Page 16
compartment of the DVD/VCR. The Power, VIDEO,VCR/TV, and CST. IN lights will appear on the front of the DVD/VCR. If the tape's record tab press OUTPUT SELECT to put the DVD/VCR in VCR mode if necessary. The green VIDEO light will appear on the front of the DVD/VCR. 3 If playback does not start - Philips DVD741VR | User manual - Page 17
the DVD/VCR cannot access the feature at this time.This does not indicate a problem with the DVD/VCR. • If a Disc is dirty or scratched, the pictures /VCR again and reinsert the Disc for playback. • When the DVD or CD light appears on the display panel, the Disc is loaded completely and is ready for - Philips DVD741VR | User manual - Page 18
is in DVD mode. You can only watch DVDs when the red DVD light is on. To make the red DVD light come on, press the SOURCE button on the front of the DVD/VCR or OUTPUT SELECT on the remote control. Disc tray Insert a Disc here. DVD OPEN/CLOSE POWER ON/OFF - Philips DVD741VR | User manual - Page 19
mode.You can only watch video cassettes or access VCR features and TV channels when the green VIDEO light is on. To make the green VIDEO light come on, press OUTPUT SELECT on the remote control or SOURCE on the front of the DVD/VCR. POWER ON/OFF DVD VIDEO SOURCE STOP/EJECT - Philips DVD741VR | User manual - Page 20
VIDEO light appears in the VCR mode. PLAY Button (DVD) Press to start Disc playback. Details are on page 17. STOP Button (DVD) Press to stop Disc playback. Details are on page 17. OPEN/CLOSE Button (DVD) Press to open or close the Disc tray. Details are on page 17. Remote Sensor - Philips DVD741VR | User manual - Page 21
H9231CD(EN).QX3 02.9.5 7:13 PM Page 21 Rear Panel 21 ANT-IN (Antenna In) Jack COMPONENT VIDEO OUT Connect your antenna or Cable TV signal here. (Y Cb Cr) Jacks Details are on pages 8-13. Connect optional component video cables here and to the Component Video In jacks AUDIO IN (right/left) - Philips DVD741VR | User manual - Page 22
Chapter repeatedly. Details are on page 53. DVD Button Press before using the remote control for DVD features. MARKER POWER SETUP AUDIO SUBTITLE ANGLE REC/OTR TITLE the DVD/VCR is in DVD mode, press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. • For VCR features, press - Philips DVD741VR | User manual - Page 23
change TV channels at the DVD/VCR. VCR Button Press before using the remote control for VCR features. OUTPUT SELECT Button Press to select DVD mode or VCR mode.The red DVD light indicates DVD mode.The green VIDEO light indicates VCR mode. PAUSE k Button Press to pause Disc playback or to advance - Philips DVD741VR | User manual - Page 24
. G Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR. 1 Press VCR, then press DISC/MENU. SELECT op CHOOSE - Philips DVD741VR | User manual - Page 25
. G Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR. 1 Press VCR, then press DISC/MENU. SELECT op CHOOSE - Philips DVD741VR | User manual - Page 26
. G Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR. 1 Press VCR, then press DISC/MENU. SELECT op CHOOSE - Philips DVD741VR | User manual - Page 27
for the VCR. Make sure: G The DVD/VCR is on and the VCR/TV light appears on the front of the DVD/VCR. (If it does not, press VCR Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. 1 Press VCR, then press DISC/MENU. 2 - Philips DVD741VR | User manual - Page 28
on page 27. G Place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR. 1 Press VCR, then press DISC/MENU. SELECT op CHOOSE - Philips DVD741VR | User manual - Page 29
. G Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR. 1 Press VCR, then press DISC/MENU. SELECT op CHOOSE - Philips DVD741VR | User manual - Page 30
. G Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR. If you select STATUS ON and COUNTER ONLY ON - Philips DVD741VR | User manual - Page 31
a television program onto a video cassette tape. Before you begin, make sure the DVD/VCR is in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. 1 Turn on the TV. 2 Insert a tape in the DVD/VCR. 1 Turn on the TV and set it - Philips DVD741VR | User manual - Page 32
are on page 31. 2 Press VCR/TV once to put the DVD/VCR in TV position. The VCR/TV light will disappear from the front of the DVD/VCR. 3 Use the TV remote control to select the channel you want to watch at the TV. 4 To return to the channel being recorded - Philips DVD741VR | User manual - Page 33
the tape.The DVD/VCR will switch to DVD mode immediately, and the TIMER light will blink.To let the OTR continue, insert another tape in the DVD/VCR. of the DVD/VCR to cancel the OTR, then press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. 2 3 1 Press VCR, then press - Philips DVD741VR | User manual - Page 34
and the tape is long enough to record the program(s). G Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. G Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR. 1 Do each step within 60 seconds of the previous - Philips DVD741VR | User manual - Page 35
example, for 9:30 PM, press 09, 30, 2. ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON - - : - - TO CORRECT PUSH CLEAR TO END PUSH EXIT 7 Follow the instructions in step 6 to enter the recording's stop time. (AM or PM will be set automatically.) ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON 09:30 - Philips DVD741VR | User manual - Page 36
press VCR/TV to select VCR position.The green VCR/TV light will appear. Press OUTPUT SELECT to choose VCR or DVD mode, then continue with other features as described in this manual. • When timer recordings are set, the TIMER light will appear.To use the DVD/VCR as usual until time for - Philips DVD741VR | User manual - Page 37
place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. 1 With the DVD/VCR on and in VCR mode and in VCR position (press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR), press VCR, then press DISC/MENU. 2 Press - Philips DVD741VR | User manual - Page 38
light will appear on the front of the DVD/VCR.) 4 Turn on the TV and set it to channel 03 or 04, whichever channel the CH3/CH4 switch on DVD/VCR 2 is set to. 5 Point the remote has copyright protection, it may not record clearly. • These instructions show you how to copy tapes using two DVD/VCRs like - Philips DVD741VR | User manual - Page 39
the steps below to play a video cassette repeatedly. G Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. 1 Press VCR, then press DISC/MENU. SELECT op CHOOSE B → PROGRAM VCR SET UP TUNER SET UP SET - Philips DVD741VR | User manual - Page 40
a tape location you want to refer to later. G Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. 1 Press VCR, then play, fast forward, or rewind a tape to the location that you would like to - Philips DVD741VR | User manual - Page 41
. G Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR. 1 Press VCR, then press SEARCH MODE/TIME SEARCH. TIME - Philips DVD741VR | User manual - Page 42
Page 42 42 Special Effects Playback VCR G Before you begin, press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR. Forward and Reverse Searching (SP/LP/SLP) 1 During tape - Philips DVD741VR | User manual - Page 43
are available in VCR mode. (Press OUTPUT SELECT so the green VIDEO light is on, if necessary.) Automatic Playback When you put a tape in remote control will not adjust tracking.) Tracking will return to Automatic Tracking Adjustment when you press STOP C (p) or insert a tape. You cannot manually - Philips DVD741VR | User manual - Page 44
H9231CD(EN).QX3 02.9.5 7:13 PM Page 44 44 Multi-Channel Television Sound VCR Your DVD/VCR can play tapes recorded in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from the left and right audio channels.Your DVD/VCR also can play tapes recorded in a second audio (usually, that - Philips DVD741VR | User manual - Page 45
G Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR. 1 Press VCR, then press DISC/MENU. SELECT op CHOOSE - Philips DVD741VR | User manual - Page 46
. G Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR. 1 Press VCR, then press DISC/MENU. SELECT op CHOOSE - Philips DVD741VR | User manual - Page 47
. G Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR. 1 Press VCR, then press DISC/MENU. SELECT op CHOOSE - Philips DVD741VR | User manual - Page 48
begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 Press DVD, then press DISC/MENU. begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 Press DVD, then press TITLE. The - Philips DVD741VR | User manual - Page 49
you begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 During playback, press DVD, then press FF g (B) or REW h (s) on the remote control. G During DVD playback, pressing FF g (B) or REW h (s) repeatedly will forward or reverse the - Philips DVD741VR | User manual - Page 50
STATUS/EXIT 2-3 DVD AUDIO CD Specific Time Playback G Before you begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 During playback, press DVD, then press SEARCH MODE/TIME SEARCH repeatedly so the Time Search display appears - Philips DVD741VR | User manual - Page 51
MODE/TIME SEARCH button, or CHANNEL/SKIP j/i (p/o). G Before you begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. A A-C MARKER POWER SETUP AUDIO SUBTITLE ANGLE Using the Number Buttons to Select a Track During playback or when - Philips DVD741VR | User manual - Page 52
H9231CD(EN).QX3 02.9.5 7:14 PM Page 52 52 Paused and Step-by-Step Playback, Resuming Playback DVD AUDIO CD Paused and Step-by-Step Playback 1 During playback, press DVD, then press PAUSE k. Play will pause and the sound will be muted. 2 When playing a DVD, press PAUSE k repeatedly to see the - Philips DVD741VR | User manual - Page 53
, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 During disc playback, press DVD, you begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 Press DVD, then press PLAY B - Philips DVD741VR | User manual - Page 54
a disc.To set the Markers, follow these steps. G Before you begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 Play the Disc to within 30 seconds prior to the point at which you want to set - Philips DVD741VR | User manual - Page 55
place the DVD/VCR in DVD mode. Press 1 OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 Press DVD, then press SUBTITLE during begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 Press DVD, then press ANGLE - Philips DVD741VR | User manual - Page 56
set.This feature will not limit viewing if the DVD maker did not code the DVD. So, make sure your DVDs play according to your settings before begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 While playback is stopped, press DVD, - Philips DVD741VR | User manual - Page 57
exceed the level you set will not play. G Before you begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 While playback is stopped, press DVD, then press SETUP. SET-UP 1.LANGUAGE 2.DISPLAY 3.AUDIO 4.PARENTAL SELECT: / SET - Philips DVD741VR | User manual - Page 58
playback.You can change the language only if multiple languages are available on the DVD. G Before you begin, press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 During DVD playback, press DVD, then press AUDIO so the audio display appears on the TV screen - Philips DVD741VR | User manual - Page 59
o p s B to move the zoomed image up, down, left, or right. Position guide example: The Zoomed area is in the top portion of the overall picture. 3 To return box with an inner blue box that shows during Zoomed playback is the position guide.To remove it or show it, press OK.The position of the blue - Philips DVD741VR | User manual - Page 60
.To set up programmed playback, follow these steps. G Before you begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 While playback is stopped, press DVD, then press MODE. The PROGRAM screen will appear. PROGRAM TIME 0:00 - Philips DVD741VR | User manual - Page 61
(1,2,3...).To set up Random Playback, follow these steps. G Before you begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 While playback is stopped, press DVD, then press MODE twice so the RANDOM screen appears. RANDOM START - Philips DVD741VR | User manual - Page 62
files recorded on a CD-RW (Compact Disc-Rewritable). G Before you begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 When you put a CD-RW with MP3 files in the DVD/VCR, the MP3 menu will appear - Philips DVD741VR | User manual - Page 63
You can review MP3 file information during playback. 1 G Before you begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 Press DVD, then press DISPLAY/STATUS/EXIT during playback. The currently playing Track will be highlighted in - Philips DVD741VR | User manual - Page 64
begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 While playback is stopped, press , place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 While playback is stopped, press DVD - Philips DVD741VR | User manual - Page 65
7:14 PM Page 65 On-Screen Displays 65 DVD You can check information about the current DVD by pressing DISPLAY/STATUS/EXIT on the remote control. 1 Press DVD, then press DISPLAY/STATUS/EXIT during playback. CH 7/49 0:01:46 - 0:03:27 CH (Chapter): Current Chapter number / total Chapters Elapsed - Philips DVD741VR | User manual - Page 66
Ratio.To change such settings, follow these steps. G Before you begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 When playback is stopped, press DVD, then press SETUP. The SET-UP screen will appear. SET-UP - Philips DVD741VR | User manual - Page 67
H9231CD(EN).QX3 02.9.5 7:14 PM Page 67 Display Settings (cont'd) 67 3 Press K or L to select an item, then press OK. G If you selected TV ASPECT, press o or p to select a setting, then press OK. Choose 4:3 LETTER BOX if you want black bars to appear at the top and bottom of the picture. Choose - Philips DVD741VR | User manual - Page 68
DVD Player SETUP menus of the DVD/VCR. G Before you begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 While playback is stopped, press DVD, then press SETUP. The SETUP screen appears. SET-UP 1.LANGUAGE 2.DISPLAY - Philips DVD741VR | User manual - Page 69
PAUSE TIMER SET 1 23 VCR/TV 4 56 MEMORY 7 89 +10 0 SPEED SEARCH MODE DISPLAY ZOOM SLOW Language Code Language Code Language Code Language Code Language Code A-B Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 - Philips DVD741VR | User manual - Page 70
place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 While playback is stopped, press menu will reappear. Select 96 kHz if the DVD was recorded in PCM (Pulse Code Modulation) 96 kHz. Otherwise, select 48 kHz. DRC SET-UP AUDIO CONTROLS 1. - Philips DVD741VR | User manual - Page 71
the DVD picture as bright as you prefer. G Before you begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 Press DVD, then press MODE once during DVD playback so BLACK LEVEL shows in the top left - Philips DVD741VR | User manual - Page 72
manual, the DVD Player's laser may be dirty. Consult an Authorized Service Center for inspection and cleaning of the laser. Caring for Video Cassettes • Use only cassettes with the mark. • Remove any light CD: 110 dB JEITA (Japan Electronics and Information Technology Industries Association) - Philips DVD741VR | User manual - Page 73
H9231CD(EN).QX3 02.9.5 7:14 PM Page 73 Glossary 73 AUDIO IN/OUT Jacks: jacks on the front and back of the DVD/VCR that receive audio from another source (IN) or send audio to another system (OUT). Automatic Channel Setup: process in which the VCR memorizes all available TV channels.Then, when you - Philips DVD741VR | User manual - Page 74
PM Page 74 74 Helpful Hints If you are having problems with your product, check this list of problems and possible solutions before requesting service.You may be able to solve the problem yourself. If you need to call a customer service representative, please know the model number and serial number - Philips DVD741VR | User manual - Page 75
/TV to choose VCR position. (The green VCR/TV light will appear.) Press OUTPUT SELECT to choose DVD mode, then continue with other DVD features as described in this manual. Remember to press the DVD button on the remote control before continuing to use the remote control to operate the DVD Player. - Philips DVD741VR | User manual - Page 76
. • Put the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. • Check the connections between the DVD/VCR Put the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. • If you used the supplied RF - Philips DVD741VR | User manual - Page 77
be in VCR mode. Press OUTPUT SELECT so the green VIDEO light is on the front of the DVD/VCR. • Make sure not eject, you may need to have an authorized servicer remove the tape. DVD/VCR ejects the tape when (Auxiliary) Input mode. See your TV owner's manual for details. • When you connect the DVD/ - Philips DVD741VR | User manual - Page 78
not distribute the product, the local Philips service organization will attempt to exchange the product, although there may be a delay if the appropriate product is not readily available. BEFORE EXCHANGING THE PRODUCT... Please check your owner's manual before exchanging the product.Adjustments of - Philips DVD741VR | User manual - Page 79
Page 79 Limited Warranty (cont'd) 79 EXCHANGE INSTRUCTIONS To exchange your product with Philips (per the warranty conditions stated previously), remember and return the product via United Parcel Service (UPS), insured and freight prepaid, to: Philips Recovery Center Rojas 6 12420 Mercantile Avenue - Philips DVD741VR | User manual - Page 80
, table of 4 controls dvd/vcr 18-21 remote 22-23 copyright protection 38, 77 counter only mode 30 cst. in light 19 daylight-savings time 28 disc/menu button 23 vcr/tv light 19 video in/out jacks . .11, 13, 20, 21, 38, 44 warranty 78-79 zoom button 22, 59 This owner's manual is made
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
 |
 |
DVD741VR
Digital Video Disc Player &
Video Cassette Recorder
Owner’s Manual
Read this manual first!
Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips Representatives can
help you get the most from your new product by explaining:
• Hookups,
• First Time Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
1-800-531-0039
Thank you for making Philips a part of your home!
Important!
Return your
Warranty
Registration Card
within 10 days.
See why inside.
H9231CD(EN).QX3
02.9.5 7:13 PM
Page 1