Philips DVDR520H Quick start guide

Philips DVDR520H Manual

Get Philips DVDR520H PDF manuals and user guides View all Philips DVDR520H manuals
Add to My Manuals
Save this manual to your list of manuals

Philips DVDR520H manual content summary:

  • Philips DVDR520H | Quick start guide - Page 1
    GUIDE 1 CONNECT THE DVD RECORDER DVDR 520H Switch on the TV set and select the correct video input. Press the [SYSTEM MENU] button to adjust your peference setting of this DVD recorder. Connect the antenna cable from the wall antenna outlet to the RF IN terminal on the back of the DVD recorder
  • Philips DVDR520H | Quick start guide - Page 2
    , press [ PAUSE/ STEP] again to start "frame by frame mode." Press [STOP] to stop playback. Need Help? Please visit: www.p4c.philips.com To play the DVD+R disc on other DVD players after recording, you must finalize the disc first: Press the [Disk Tools] button. Press [p] [q] to select "Finalize
  • 1
  • 2
1
CONNECT THE DVD RECORDER
Connect the antenna cable from the wall
antenna outlet to the
RF IN
terminal on the
back of the DVD recorder.
Use another antenna cable to connect the DVD
recorder’s
RF OUT
terminal to the antenna
in terminal at the back of your TV set.
Use AUDIO/VIDEO cables (red/white/yellow)
to connect the DVD recorder’s
AV OUT
termianls to the
AV IN
terminals at the back of
your TV set.
Connect the power cable from the DVD
recorder’s
AC IN
terminal to the power outlet.
QUICK USE GUIDE
DVDR 520H
Press
[STANDBY-ON
]
to switch on the DVD
recorder.
3
START INSTALLATION
2
PREPARE THE
REMOTE CONTROL
NO PICTURES!
Check if Video Input of the TV set is switched to
“AV” and press
[CHANNEL
]
button to select the right
channel.
NO SOUND!
Check if the audio L/R jacks on the recorder are con-
nected to the TV set, stereo system or receiver.
Press the
[SYSTEM
MENU]
button to adjust
your peference setting of
this DVD recorder.
Press
[
p
] [
q
]
to select
an item in the menu.
Press
[
u
]
to access the
selected item’s options.
Press
[OK]
to confirm your
selection.
Language menu
appears.
OSD lanuage
:
select on-screen display
language
.
System menu appears.
Video output:
sets video
output
TV Type:
sets the TV type
Date:
set the system
date using the
numbered buttons.
Time:
set the system
time using the
numbered buttons.
When completed, press
[SYSTEM MENU]
to
exit the menu.
The DVD Recorder is ready for use!
Switch on the TV set and
select the correct video
input
.
TV tuner menu
appears.
TV channel search
: Go to
“Utilities” and then “start
scan.” Press
[OK]
to start
automatic TV channel
scan to search and store
available channels.