Philips DVDR77 Quick start guide
Philips DVDR77 Manual
 |
View all Philips DVDR77 manuals
Add to My Manuals
Save this manual to your list of manuals |
Philips DVDR77 manual content summary:
- Philips DVDR77 | Quick start guide - Page 1
guide ENGLISH Connecting your DVD Recorder to the TV/Initial installation Warning ! Until the initial installation has been completed, the buttons on the front will not function. 1 Remove the antenna cable jack from your TV. Insert it into the ANTENNA IN jack at the back of the DVD recorder - Philips DVDR77 | Quick start guide - Page 2
. b In case of bad, non-standard video input signals, the DVD Recorder may not be able to detect the signal. Problem Programming recordings 1 2 3 4 5 6 7 Press TIMER s on the remote control. Select line 'Timer Programming' using B or A and confirm with C . The current data will be displayed - Philips DVDR77 | Quick start guide - Page 3
the slide show on a DVD+RW/+R so you can view them on a DVD player. ENGLISH What is the difference PC (PCMCIA) Card In this DVD-Recorder you can use the following types the medium you want to use (CD, DVD+RW/+R, memory card). Press PHOTO on the remote control. The 'Media menu' will appear. Use - Philips DVDR77 | Quick start guide - Page 4
+R you can only store either photos or videos. A combination of JPEG photos and video is not possible. 77/17 DVDR Making a slide show from a roll Each roll will be stored as one video title on the DVD+RW/+R. If you want to make a video title from different rolls, you have to create an album first
-
1 -
2 -
3 -
4
 |
 |
Quick install guide
Connecting your DVD Recorder to the
TV/Initial installation
Warning ! Until the initial installation has been completed, the buttons on the front
will not function.
1
Remove the antenna cable jack from your TV. Insert it into the
ANTENNA IN
jack at the back of the DVD recorder.
2
Insert one end of the supplied antenna cable into the
TV
OUT
jack at the back of the DVD Recorder and the other end
into the antenna input jack at the back of the TV.
3
Connect
the
S-VIDEO
OUT
/
AUDIO
L/R
OUT
jacks
or
VIDEO
(CVBS)
OUT
/
AUDIO
L/R
OUT
with
the
corresponding input jacks of the TV.
4
Switch on the TV.
5
Connect the mains jack
4
MAINS
at the back of the DVD
Recorder with the power supply using the supplied power cable.
The most important features of the DVD Recorder will appear
on the display. After the initial installation is completed, this
function will be switched off.
6
Press
STANDBY-ON
m
on the recorder.
±² ³´ µ¶·
7
'
±² ³´ µ¶·
' will appear on the display.
Initial Setup
Menu Language
English
Español
Français
Press OK to continue
8
If necessary, select the channel number of the input jack at the
TV.
The initial installation menu appears on the screen.
9
Select your preferred setting using
B
or
A
.
Confirm with
OK
.
The initial installation is carried out automatically. Please wait until the procedure is completed.
ENGLISH