Philips FW-C577 User manual - Page 24

English Timer Operations Timer setting The system can switch on to CD,TUNER or USB PC LINK mode automatically at a preset time, serving as an alarm to wake you up. IMPORTANT! - Before setting the timer, ensure that the clock is set correctly. - The volume of the timer will increase gradually to minimum level 10 or last tuned volume level. 3 (CD / TUNER / USB PC LINK) 4 (00:00 / 12:00AM) CLK/TIMER TIMER ON/OFF 4 (00:00 / 12:00AM) 2 1, 2, 5 1 Press and hold CLK/TIMER (or CLOCK•TIMER on main unit) until "SELECT CLOCK OR TIMER" is displayed. 2 Press ë to change the display to "TIMER" and press CLK/TIMER again to confirm. 3 Press CD or TUNER or USB PC LINK to select the wake-up source. CD ™ "CD XX:XX" TUNER ™ "TU XX:XX" USB PC LINK ™ "USB XX:XX" 4 Press à or á (for hours) and í or ë (for minutes) repeatedly to set the wake up time. 5 Press CLK/TIMER to store the setting. ➜ The timer will always be switched on after it has been set. ➜ icon remains on the display. It indicates the timer is activated. q At the preset time, the selected sound source will be played for 30 minutes before it switches to Eco Power standby mode (if no button is being pressed within the time frame). ➜ CD - playing the first track of the last selected disc or programmed track (if program mode is active). If the last selected disc tray is empty, it will switch to the next available disc. If all the disc trays are not available, it will switch to Tuner mode. ➜ TUNER - playing the last tuned radio station. ➜ USB PC LINK - playing the last selected playlist. If the connection fails, it will switch to Tuner mode. Refer to "USB PC Link" for proper connection and setup before use. Activating/Deactivating the timer q Press TIMER ON/OFF on the remote to turn off the timer or turn on to the last setting again. ➜ If activated, the timer information will display for a few seconds, then the system resumes to the last active source or stays in standby mode. ➜ If deactivated, "OFF" is displayed. Note: - The system will exit timer setting mode if no button is pressed within 90 seconds. 24