Philips FWM575 User manual - Page 23

English Tape Operation/Recording Rewinding / Fast forwarding 1 Stop playback, press à or á. ➜ The tape will stop automatically at the end of rewinding or fast forwarding. 2 Press Ç to stop rewinding or fast forwarding. Note: - During rewinding or fast forwarding of a tape, it is also possible to select another source (CD or TUNER, for example). General information on recording ● For recording, use only tape of IEC type I (normal tape). ● The recording level is set automatically, regardless of the position of the Volume, DBB, DSC and so forth. ● The tape is secured at both ends with leader tape. At the beginning and end of the tape, nothing will be recorded for six to seven seconds. ● To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect. ● If "CHECK TAPE" is displayed, the protection tab has been broken. Put a piece of clear adhesive tape over the opening. IMPORTANT! - Recording is permissible if copyright or other rights of third parties are not infringed upon. - Recording is possible only on tape deck 2. Preparation for recording 1 Press TAPE to select TAPE 2. 2 Load a recordable tape into tape deck 2 with full spool to the left. 3 Prepare the source to be recorded. CD - load the disc(s). TUNER - tune to the desired radio station. TAPE - load the prerecorded tape into tape deck 1 with the full spool to the left. AUX - connect external equipment. USB - connect a USB mass storage device. When recording is in progress ➜ REC starts flashing. ● It is not possible to listen to another source, except tape dubbing. ● It is not possible to activate the timer function during recording or tape dubbing. One touch recording 1 Press CD, TUNER, AUX or USB to select the source. 2 Start playback of the selected source. 3 Press RECORD to start recording. To stop recording ● Press Ç on the system. Note: - One Touch Recording is not possible in TAPE mode, "SELECT SOURCE" is displayed. 23