Philips FWM575 User manual - Page 31
Not all lighted buttons are showing light. - mini system
View all Philips FWM575 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
English Radio reception is poor. ✔ If the signal is too weak, adjust the antenna or connect an external antenna for better reception. ✔ Increase the distance between the Mini HiFi System and your TV or VCR. Recording or playback cannot be made. The tape deck door cannot open. The system does not react when buttons are pressed. Sound cannot be heard or is of poor quality. ✔ Clean deck parts, see "Maintenance". ✔ Use only NORMAL (IEC I) tape. ✔ Apply a piece of adhesive tape over the missing tab space. ✔ Remove and reconnect the AC power plug and switch on the system again. ✔ Remove and reconnect the AC power plug and switch on the system again. ✔ Adjust the volume. ✔ Disconnect the headphones. ✔ Check that the speakers are connec ted correctly. ✔ Check if the stripped speaker wire is clamped. ✔ Make sure the MP3-CD was recorded within 32-256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz. The left and right sound outputs are reversed. ✔ Check the speaker connections and location. The remote control does not function properly. ✔ Select the source (CD or TUNER, for example) before pressing the function button (É,í,ë). ✔ Reduce the distance between the remote control and the system. ✔ Insert the batteries with their polarities (+/- signs) aligned as indicated. ✔ Replace the batteries. ✔ Point the remote control directly towards the IR sensor. The time is not working. ✔ Set the clock correctly. ✔ Press and hold CLOCK•TIMER to switch on the timer. ✔ If recording or tape dubbing is in progress, stop recording. Not all lighted buttons are showing light. The Clock/Timer setting is erased. ✔ Press DIM to select DIM OFF display mode. ✔ Power has been interrupted or the power cord has been disconnected. Reset the clock/timer. The system displays features automatically and buttons start flashing. ✔ Press and hold Çon the system to switch off the demonstration. 31