Philips LC1041 User Guide

Philips LC1041 - ProScreen PXG10 XGA LCD Projector Manual

Get Philips LC1041 - ProScreen PXG10 XGA LCD Projector PDF manuals and user guides View all Philips LC1041 manuals
Add to My Manuals
Save this manual to your list of manuals

Philips LC1041 manual content summary:

  • Philips LC1041 | User Guide - Page 1
    User guide ProScreen PXG10 multimedia projector ) nu Menu Me D-Zoom c Auto syn OK Lens Input te A/V Mu Philips Creative Display Solutions
  • Philips LC1041 | User Guide - Page 2
    OF ELECTRIC SHOCK. DO NOT REMOVE SCREWS EXCEPT SPECIFIED USER SERVICE SCREW. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This "bolt of lightning" indicates uninsulated material within
  • Philips LC1041 | User Guide - Page 3
    HAZARDS. In order not to defeat the safeguards incorporated into this projector, observe the following basic rules for its installation, use and servicing. 1. Unplug the projector from the wall outlet before cleaning or lamp replacement. 2. Do not use liquid cleaners or aerosol cleaners. Use a soft
  • Philips LC1041 | User Guide - Page 4
    up your projector. • ProScreen PXG 10 • Lens cap • Power cord (2x); USA version plus Continental Europe version • Computer audio cable • Computer VGA cable • DIN-D-sub RS-232C cable • RCA Audio Video Cable • BNC-RCA adapters (3x) • S-Video Cable • Scart - RCA adapter • Remote control plus AA size
  • Philips LC1041 | User Guide - Page 5
    and, if not installed and used in accordance with the user's guide, may cause harmful interference to radio communications. Operation of this this equipment could void the user's authority to operate this device. Note: SAVE ENERGY! To save energy, please put the projector in the STANDBY position if
  • Philips LC1041 | User Guide - Page 6
    English ( * &^ % ≤ £ Lamp Temp. 1 2 3 4 5 6 Power ON A / V Mute Volume ) $ ¡ Menu V-Format ) Standby / OFF Lens Data 1 ™ ™ £ Data 2 V-Effect # @ ! 0 9 Video D-Freeze Auto sync OK D- Zoom 78 § ∞ A 1 2 3 Menu Menu fig. 1 B C @ Computer - RGB /
  • Philips LC1041 | User Guide - Page 7
    with the remote control. Use these Philips Authorised LCD Projector Dealer or Service Centre. 104 F ('40 C) 41 F ('5 C) NOTES ON OPERATION •The exhaust vent,the lamp projector to the normal operating condition. TEMPERATURE MONITOR FUNCTION If the projector starts to overheat due to setup problems
  • Philips LC1041 | User Guide - Page 8
    projector is too high ^ Lamp replacement indicator (Lamp) Lights to indicate the status of the lamp; Green: lamp is ready Flashing green: warming up Red: change the lamp and vertical angle of the projector. £ Remote control sensors Receive the signals from the remote control. ≤ Speakers ∞ Cooling fan
  • Philips LC1041 | User Guide - Page 9
    FUNCTIONAL OVERVIEW CONNECTIONS (fig. 3) On remote control (fig. 2) 1 On / Off switch z / y For switching the remote control as well as the projector on and off. Note: The remote control will always use some power, even when not in use. The remote control unit will automatically switch off when not
  • Philips LC1041 | User Guide - Page 10
    wide and telephoto lenses from Philips are available for specialised application. Please see your local Philips Authorised LCD Projector Dealer for details on the 34 2,54 2,69 3,38 3,81 5,08 7,62 inch 40 60 72 84 92 100 106 133 150 200 300 mtrs 1,50 2,40 2,80 3,30 3,70 4,00 4,30 5,40 6,10 8,10 12,0
  • Philips LC1041 | User Guide - Page 11
    it by the carrying handle on the side. CAUTION! Do not lift or carry the projector by the lens or the lens cap as this may damage the lens. INSERTING THE BATTERIES IN THE REMOTE CONTROL FOCUS NEXT (Lens) OK ADJUST ZOOM NEXT (Lens) OK KEYSTONE ADJUST OK Push END (Lens) TEST PTRN
  • Philips LC1041 | User Guide - Page 12
    ) 8 USB mouse receiver Optional cables and adapter: - - - - Computer cable Mini D sub (15 pin) BNC connectors (5x) Programmable VGA/MAC adapter RS-232C cable for external projector control: Mini D sub (9 pin female on both sides) Computer audio cable 3,5 mm stereo minijack to RCA pin (2x)
  • Philips LC1041 | User Guide - Page 13
    on the computer. Notes: - A Macintosh adapter may be required for use with some Macintosh computers. Contact your nearest Philips Authorised LCD Projector Dealer or Service Centre. - Audio Input 1 accepts Data 1 port input, Audio Input 2 accepts Data 2 port input. - A 3.5 mm minijack to RCA audio
  • Philips LC1041 | User Guide - Page 14
    . 2. To use the built-in audio system, connect the red and white RCA connectors to the corresponding red and white Audio Input terminals on the projector (L) and the Audio output terminals on the video source. In case your VCR, Laser Disc player, video camera or TV is equipped with a Scart connector
  • Philips LC1041 | User Guide - Page 15
    - The characters in brackets (A) correspond to characters in fig. 3 on page 4. CONNECTING TO AUDIO EQUIPMENT CONNECTING THE REMOTE CONTROL MOUSE RECEIVER When the RS-232C port on the projector is connected to a computer with an RS-232C cable (cross type, sold separately), the computer can be used to
  • Philips LC1041 | User Guide - Page 16
    is not correctly set up. Refer to the computer's operation manual for details of setting up/installing the mouse driver. - Lamp indicator light green. USING THE REMOTE CONTROL (FIG 2) The remote control has the following two functions: • Projector control • Wireless mouse • Slide the remote control
  • Philips LC1041 | User Guide - Page 17
    USER INTERFACE) MENU SCREENS Graphical User Interface This projector has two sets of menu screens (Data/Video) that allow you to adjust the image and various projector settings. These menu screens can be operated from the projector or the remote control 4 to select a specific adjustment item. 4. To
  • Philips LC1041 | User Guide - Page 18
    8. OPERATION PICTURE CONTROL Picture control English - The projector's picture is set to standard specifications at the factory. However, you can adjust the image to suit your own preferences by using the Data or Video ADJUST feature. - The projector will store the last used settings for every
  • Philips LC1041 | User Guide - Page 19
    - Used to automatically adjust a computer image. - Auto Sync adjustment can be made manually by pressing Auto sync (either on local keyboard and remote control), or automatically by setting "Auto Sync" to "ON" in the projector's GUI menu. When "Auto Sync" is set to "ON": - The sync adjustment
  • Philips LC1041 | User Guide - Page 20
    and "Picture" menu screen appear. GUI operation guide is also displayed. 2. Press 3 / 4 to select a specific adjustment item. 4. Press 1 / 2 to Sharpness" is adjustable only when a DVD player is connected. AUDIO CONTROL This projector's audio is factory preset to standard settings. However, you can
  • Philips LC1041 | User Guide - Page 21
    OPERATION 3. Press 3 / 4 to select "Save Setting" , and then press OK. Personal preferences/Other settings Reverse/Invert Image Function This projector is equipped with a reverse/invert image function which allows you to reverse or invert the projected image for various applications. Front Normal
  • Philips LC1041 | User Guide - Page 22
    projector, contact your nearest Authorised LCD Projector Dealer or Service Centre to obtain the recommended ceiling-mount bracket (sold separately). - When the projector Data 1, Data 2 or Video is pressed on the projector, or Input on the remote control, • when the input signal is interrupted, or •
  • Philips LC1041 | User Guide - Page 23
    signals that are not in 4:3 aspect ratio are input. - DOT BY DOT mode displays images in their native resolution and not expanded to fit the LCD resolution. NORMAL WIDE DOT BY DOT DOT BY DOT (WIDE) For DTV decoder RGB signal in 4:3 aspect ratio For DTV decoder RGB signal in 16
  • Philips LC1041 | User Guide - Page 24
    the GUI menu, the on-screen messages will not appear when Data 1, Data 2 or Video are pressed on the projector or Input on the remote control. 1. Press Menu. 2. Press 1 / 2 to select "Options" . 3. Press 3 / 4 to select "OSD Display" . 3. 4. 5. 6. Press 3 / 4 to select "Economy Mode" , and then
  • Philips LC1041 | User Guide - Page 25
    When no input signal is detected for more than 15 minutes, the projector will automatically shut off. The on-screen message on the left will input signal information. - It is recommended that the lamp be replaced after approximately 2,000 hours of usage. See page 25 for details. 23 English
  • Philips LC1041 | User Guide - Page 26
    a Startup Image - This function allows you to specify the image to be displayed upon the projector's startup. Description of Startup Images Selected item Background image Philips None PHILIPS default image Black screen 3. Press OK to display all the adjusted settings. 1. Press Menu. 2. Press
  • Philips LC1041 | User Guide - Page 27
    the operation manual of the computer for details on setting up/installing the correct mouse driver. - A Macintosh adapter may be required for use with some Macintosh computers. Contact your nearest Philips Authorised LCD Projector Dealer or Service Centre. - For more details on specification of the
  • Philips LC1041 | User Guide - Page 28
    page 25.) • Take the projector to your nearest Authorized Philips Industrial LCD Products Dealer or Service Center for repair. • Carefully replace the lamp. (See page 26.) • Take the projector to your nearest Authorized Philips Industrial LCD Products Dealer or Service Center for repair. • Securely
  • Philips LC1041 | User Guide - Page 29
    replacing the lamp, be sure to clean the air filters. See page 25 for cleaning the air filters. Resetting the lamp timer 1. Connect the power cord. - Plug the power cord into the AC socket of the projector. 2. While pressing 4, 2 and OK on the projector, press Power ON on the projector. - 'Lamp
  • Philips LC1041 | User Guide - Page 30
    TROUBLESHOOTING If a fault occurs, first check the points listed below before taking the projector for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service organisation. English PROBLEM of the projector. (See pages 11-13) • Remote control batteries
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
Philips
Creative Display
Solutions
User guide
P
ro
S
creen PXG10
multimedia projector
)
A/V Mute
A/V Mute
Auto sync
Auto sync
Input
Input
OK
OK
Lens
Lens
D-Zoom
D-Zoom
M enu
M enu