Philips LC1341 User Manual

Philips LC1341 Manual

Get Philips LC1341 PDF manuals and user guides View all Philips LC1341 manuals
Add to My Manuals
Save this manual to your list of manuals

Philips LC1341 manual content summary:

  • Philips LC1341 | User Manual - Page 1
    User Guide Multimedia Projector ProScreen PXG30 Series
  • Philips LC1341 | User Manual - Page 2
    USERS IN THE U.S.A. The responsible party of this multi media projector is the following: Philips Consumer Electronics Company One Philips USER-SERVICEABLE PARTS EXCEPT LAMP UNIT. REFER SERVICING TO QUALIFIED SERVICE problems. CAUTION This projector produces intense light with the user's guide, may
  • Philips LC1341 | User Manual - Page 3
    PHILIPS instructions service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. 20. It is recommended to clean the air filter after every 100 lamp
  • Philips LC1341 | User Manual - Page 4
    Safeguards NOTES ON OPERATION - The exhaust vent, the lamp cage cover and adjacent areas may be extremely hot during of the unit. Internal cleaning should only be performed by a Philips Authorised LCD Projector Dealer or Service Centre. Side and Top 20cm Rear 50cm 50cm 50cm INSTALLING THE
  • Philips LC1341 | User Manual - Page 5
    Video Equipment 16 7. Operation 17-22 Remote Control Operation 17 Operating the On- 25 Auto Image Adjustment 25 Manual PC Adjustment 26 Picture Image Level Adjustment 29 Picture Screen Adjustment 30 9. Video Input 31-35 Selecting Input Lamp Replacement 41 13. Appendix 43-50 Troubleshooting
  • Philips LC1341 | User Manual - Page 6
    Philips UHP lamp guarantees long life, sustained brightness over the lamp's support various applications. 4. Universal remote control, ProntoNEO Supplied with a universal learning touch screen remote control with preprogrammed user , vertically + / - 30º for Y axis, horizontally + / - 10º for
  • Philips LC1341 | User Manual - Page 7
    Carry handle t Air intake vent Intake of air for ventilation. y IR sensor r For receiving signals from the remote e control. w q Air intake vent Intake of air for ventilation. w Lamp cover e Air filters r Adjustable feet r For adjusting the picture tilt and projection angle. w e 7
  • Philips LC1341 | User Manual - Page 8
    Becomes dim red when the projector is turned on. Lights bright red in standby mode.(P20,45) e Standby Indicator Lights green when the projector is ready to be turned on. (P20) r Lamp Indicator (Lamp) Lights yellow when the life of the projection lamp draws to an end.(P41,42,45) t Source For
  • Philips LC1341 | User Manual - Page 9
    to restart the unit. Do not use it excessively. u RS-232C port For connecting to mouse port of a computer which is controlled via the remote control of the projector. i S-video in Input socket for connecting S-video output from video equipment. o USB For connecting a PC or Apple Macintosh computer
  • Philips LC1341 | User Manual - Page 10
    Overview Remote Control Unit Remote Control Unit q y u w i e r o !7 t !0 !6 !5 !1 !4 !2 !3 ✽ This figure shows the Device Overview screen. q Serial Port For communicating with a PC w Backlight For activating the display and adjusting the contrast. (See ProntoNEO User Guide for
  • Philips LC1341 | User Manual - Page 11
    image. (P30) @4 timer For activating SmartTimer function. (P22) @5 V-effect For selecting image level. (P28,33) @6 mouse left / right When using the remote control as a PC mouse in wireless mouse operation, these buttons function as left and right buttons of a PC. (P38) @7 Cursor pointers When using
  • Philips LC1341 | User Manual - Page 12
    having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect the projector with peripheral equipment before turning the
  • Philips LC1341 | User Manual - Page 13
    recommended to limit ambient lighting to provide the best image. 10.8'(3.3m) 4.1'(1.2m) 100" 39" 77" 16.4'(5.0m) 150" 115" 30" 22.0'(6.7m) 200" 300" Max. Zoom 231" Min. Zoom Screen Size Max. Zoom Min. Zoom Distance 39" 30" 4.1' (1.2m) 100" 77" 10.8' (3.3m) 150" 115" 16.4' (5.0m) 200"
  • Philips LC1341 | User Manual - Page 14
    Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to the projector. To transport the projector through a courier or transport service, consult a Philips Authorised LCD Projector Dealer. Adjustable Feet Moving the projector
  • Philips LC1341 | User Manual - Page 15
    of use. (See page 23) ◆ MAC ADAPTER A Macintosh adapter may be required for use with some Macintosh computers. Contact your nearest Philips Authorised LCD projector Dealer or Service Centre. Note: When connecting the cable, the power cords of both the projector and the external equipment should be
  • Philips LC1341 | User Manual - Page 16
    6. Installation Connecting to Video Equipment Connecting to Video Equipment Cables used for connection • Video Cable (RCA x 1 or RCA x 3) • S-Video Cable • Audio Cable {Mini Plug (stereo)} • Scart Cable • Audio Cable (RCA x 2) Video Source (example) Video Cassette Recorder Video Disc Player
  • Philips LC1341 | User Manual - Page 17
    are provided in the ProntoNEO RU 930 User Guide. Read the manual thoroughly for proper operation. Make sure to install the batteries into the remote control before use. Operation 1. Press the Device Button to show the Device Overview screen. 2. Tap Proj. PXG 30 to go into the Projector Menu. 3. Main
  • Philips LC1341 | User Manual - Page 18
    . ✽ The selected item is highlighted in orange. Item Data Press Cursor Left/Right buttons to adjust the value or set function. Top Control Cursor Button Remote Control Unit Menu Button OK Button Menu Button Cursor Button OK Button 18
  • Philips LC1341 | User Manual - Page 19
    PC Source Press Menu button while connecting to PC input source. Guide Window Shows selected item of the OnScreen Menu. PC System Menu (Refer to P30) Setting Menu For changing the settings of the projector or reset Lamp Replace Counter (Refer to P36, 37,42) Input Menu For selecting input source
  • Philips LC1341 | User Manual - Page 20
    lights red(dim), and the Standby Indicator lights green remote control. The Power Indicator dims, and the cooling fans start to rotate. Preparation Display appears on the screen and count-down starts. The signal from a PC or video source comes up after 30 seconds. Current Input position and Lamp
  • Philips LC1341 | User Manual - Page 21
    press Cursor Right button to reduce the right part. - The arrows are white in no correction. - The arrow(s) of direction being corrected turn(s) orange. - The arrow(s) disappear(s) at the maximum correction. - If you press reset button on the remote control while the keystone dialog box is being
  • Philips LC1341 | User Manual - Page 22
    A/V Mute Function Press AV Mute button on the top control or the remote control to black out the image and to mute the sound . To button again or press any other button. SmartTimer Function Press timer button on the remote control. The timer display "00 : 00" appears on the screen and the timer
  • Philips LC1341 | User Manual - Page 23
    selected when Data (Out) is set as Data 3 source. Refer to the "Menu Operation" below. Data/CH+ button toggles as follows Data1 Data 2 Data 3 Remote Control Menu Operation Data 1 : Data / RGB (Scart) 1 Press Menu button to display the On-Screen Menu. Press Cursor Left/Right button to select the
  • Philips LC1341 | User Manual - Page 24
    press OK button. PC SYSTEM MENU System Menu icon Displays selected system. Note: If the image is not provided properly, manual adjustment may be required. Refer to the section "Manual PC Adjustment".(page 26~27) The systems on this dialog box can be selected. Custom Mode (1~5) set in PC Adjust
  • Philips LC1341 | User Manual - Page 25
    Auto Image can be also executed by pressing auto button on the remote control. ✽To store adjusted parameters. Parameters adjusted with Auto Image by selecting Mode in PC System Menu (P24). Refer to step 3 of "Manual PC Adjustment" section (P27). PC Adjust Menu icon Select Auto Image icon and press
  • Philips LC1341 | User Manual - Page 26
    as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture, and projected improperly. The Manual PC Adjustment function allows you to manually adjust several parameters to match these special signal formats. Also, you can store these adjusted parameters in the
  • Philips LC1341 | User Manual - Page 27
    8. Computer Input PC Adjustment Display area Selects the area displayed by this projector. Select the resolution at Display area dialog box. Display area H Adjusts the horizontal area displayed by this projector. Press Cursor Left/Right button(s) to decrease/increase value and then press OK button
  • Philips LC1341 | User Manual - Page 28
    Image 3 and Image 4 by pressing V-effect button on the remote control. Standard Normal picture level preset on this projector. Real Picture this projector. Real Picture level with improved halftone for graphics. Image 1~4 User preset picture adjustment in Image Adjust Menu (P29). IMAGE SELECT MENU
  • Philips LC1341 | User Manual - Page 29
    blue tone. (From 0 to 63.) Gamma Press either Cursor Left or Right button to obtain better balance of contrast. (From 0 to 15.) 3 Store To store manually preset image, select Store icon and press OK button. Image Level Menu will appear. Select one from Image 1 to 4 where you want to set and
  • Philips LC1341 | User Manual - Page 30
    image is larger than screen size. A projected image can be also expanded by pressing D-zoom + button on the remote control. Digital Zoom - When Digital zoom - is selected, the On-Screen Menu disappears and the message "D-Zoom properly if the computer system prepared on PC Adjust Menu is used. 30
  • Philips LC1341 | User Manual - Page 31
    - Press Video button on the top control. Press CH- button on the remote control. (The button toggles among Auto, Video, S-video and Y,Pb/Cb,Pr/Cr Press video, S-video or Y, Pb/Cb, Pr/Cr button on the remote control. If the projector cannot project properly, select correct input source through Menu
  • Philips LC1341 | User Manual - Page 32
    automatically detects incoming Video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. - PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce proper video image, it is necessary to select a specific
  • Philips LC1341 | User Manual - Page 33
    2, Image 3 and Image 4 by pressing V-effect button on the remote control. Standard Normal picture level preset on this projector. Cinema Picture Cinema Picture level adjusted for the picture with fine tone. Image 1~4 User preset picture adjustment in Image Adjust Menu (P34, 35). Image Select Menu
  • Philips LC1341 | User Manual - Page 34
    15.) Noise reduction Press Cursor Left/Right button(s) to change noise reduction mode. Dialog box display is changed to "On" to reduce noise (rough parts) of image. Press Cursor Left/Right button(s) again, to change noise reduction mode to off. Progressive Press Cursor Left/Right button(s) to change
  • Philips LC1341 | User Manual - Page 35
    9. Video Input 3 Store To store the adjustment data, select Store icon and press OK button. Image Level Menu will appear. Select from the Image Level 1 to 4 and then press OK button. Reset Reset all adjustment to previous figure. Quit Closes Image Menu. Picture Image Adjustment Picture Screen
  • Philips LC1341 | User Manual - Page 36
    Displays. Off ···· sets On-Screen Displays disappeared except; - On-Screen Menu - "Power off?" message Logo When this function is "On," projector displays Philips logo when starting up. Ceiling When this function is "On," picture is top / bottom and left / right reversed. This function is used to
  • Philips LC1341 | User Manual - Page 37
    when operating several projectors or video equipment together. Select your desired code from Code 1 to Code 8. ✽ When you change the codeset of the projector, you must also change that of the remote control in accordance with the table on Page17. Lamp counter reset This function is used to reset
  • Philips LC1341 | User Manual - Page 38
    screen. When the OnScreen Menu or any message / dialog box is displayed on the screen, this function does not work. Installation To use the remote control as the wireless mouse for a personal computer. Make sure that the mouse driver is properly installed in your computer and its USB port (or
  • Philips LC1341 | User Manual - Page 39
    performing the above checks, Cooling Fans or the Internal Circuits may be malfunctioning. Contact a Philips Authorised LCD Projector Dealer or Service Centre. Ensure the Standby Indicator is lighted when turning on the projector. If the temperature is not lowered enough, the Temperature Warning
  • Philips LC1341 | User Manual - Page 40
    of the projector. Recommendation: For minimal servicing and to maintain high image quality, Philips recommends that this projector be installed in cleaners, solvents or other harsh chemicals might scratch the surface. 2 Lightly wipe a cleaning cloth over the Projection Lens. 3 When the projector
  • Philips LC1341 | User Manual - Page 41
    Screw Handle Lamp Assembly Order Replacement Lamp Replacement Lamp can be ordered through your dealer. Give the following information to the dealer when you order. - Model No. of your projector : LC1345 or LC1341 - Replacement Lamp Type No. : LCA3121/00(250W), 12nc: 8670 931 21009 (Service Parts No
  • Philips LC1341 | User Manual - Page 42
    instructions in the LAMP REPLACEMENT section of this manual. ) Continuous use of the lamp with the LAMP INDICATOR lighted may increase the risk of lamp explosion. - A Lamp technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those
  • Philips LC1341 | User Manual - Page 43
    Troubleshooting Troubleshooting Before calling your dealer or service Problem: - Try these Solutions No power. - Plug the power cord of the projector into the AC outlet. - Make sure Standby Indicator lights and the projector. - It takes about 30 seconds to display an image after turning on
  • Philips LC1341 | User Manual - Page 44
    the mouse setting on your computer. - Turn the projector on before turning on a computer. If the problem still persists after following all operating instructions, contact a Philips Authorised LCD Projector Dealer or Service Centre. Give the model number and explain the difficulty. Advice to obtain
  • Philips LC1341 | User Manual - Page 45
    button on the top control or on button on the remote control. ✽ The projector is operating normally. The temperature When the life of the projection lamp draws to an end, the Lamp Indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly.
  • Philips LC1341 | User Manual - Page 46
    13. Appendix Menu Tree (Projector) Main menu Input Data 1 Data 2 Data 3 Video Data RGB( Scart ) Data ( In ) Data ( Out ) Auto Video S-Video Y, Pb / Cb, Pr / Cr System 1) System 1) System 1) System 2) System 2) System 3) Data Input Main menu System 1) SVGA 1 VGA 1 MODE 1 MODE 2 - - - - - -
  • Philips LC1341 | User Manual - Page 47
    Lamp mode Remote control Lamp counter reset 0 - 63 On / Off English German French Italian Spanish Portuguese Dutch Swedish Chinese Korean Japanese Quit Store / Reset On / Off On / Off On / Off On / Off On / Off On / Off On / Off Normal / Eco Code 1 Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code
  • Philips LC1341 | User Manual - Page 48
    13. Appendix Menu Tree (Remote Control) Menu Tree Use Mode Code set Code canceled OK Cancel Brand Next Code input ( 4 digit ) Remote Control Code Set Device Proj. PXG30 1/4 on off D1 D2 D3 video S-video YPbPr f lens f Feature f mouse focus - / + 2/4 zoom - / + lens shift - / + auto
  • Philips LC1341 | User Manual - Page 49
    Note : Specifications are subject to change without notice. H-Freq. (kHz) 61.00 35.522 46.90 47.00 58.03 60.24 68.68 64.20 62.50 63.90 63.34 63.74 71.69 81.13 63.98 79.976 60 33.75 33.75 28.125 V-Freq. (Hz) 75.70 86.96 (Interlace) 58.20 58.30 72.00 75.08 75.06 70.40 58.60 60.00 59.98 60.01 67.19 76
  • Philips LC1341 | User Manual - Page 50
    x D) Net weight 7.9 kg (17.4 lbs) LCD LC1345/00 : 3 x 1.0" HT Poly Silicon TFT with µ lens LC1341/00 : 3 x 1.0" HT Poly Silicon TFT Resolution user guide (8 languages) AC power cord x 2 (US and Europe type) Remote control ProntoNEO (including batteries, CD-ROM, Instruction for use, Quick start guide
  • Philips LC1341 | User Manual - Page 51
    51
  • Philips LC1341 | User Manual - Page 52
    1AA6P1P3757-- (MC3W) Printed in Japan
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
User Guide
Multimedia Projector
ProScreen PXG30 Series