Philips SRC2063 User manual (English) - Page 3

English Getting started Glow buttons (SRP2006 only) The SRP2006 glow buttons: (ENTER, (-) and the numeric buttons) glow in the dark, enabling easy use of the remote control, even in a dimly lit room. To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 2 G etting started 2.1 Inserting the batteries • Insert 2 AAA type batteries, noting the + and configuration in the battery compar tment. Note When replacing the batteries, all user settings will be retained in the remote control memory for 5 minutes. 2.2 Setting up the universal remote controls The example below instructs you how to set up your universal remote controls for your TV. You can repeat the same steps for other devices (DVD player / recorder, DTV, Cable / Satellite box, DVR and VCR) which you want to operate, using the universal remote controls. Note The setup procedure is the same for both remote controls. The remote controls can be set up to operate any 3 or 6 of the following devices: Device name Description TV Traditional TV, LCD / Plasma TV and projection TV,TV part of TV / VCR, TV / VCR / DVD and TV / DVD combos DVD DVD player / recorder (DVDR), DVD / Hard Disk Drive combination (DVDR-HDD), Blu-Ray player, High Definition DVD player (HD-DVD), DVD part of TV / DVD, TV / VCR / DVD and VCR / DVD combos CBL/SAT Cable box, satellite receiver, Internet Protocol TV (IPTV), Free To Air TV, High Definition Television decoder (HDTV), Digital Television (DTV) and Tivo VCR Video cassette player / (SRP2006 only) recorder,VCR part of TV/ VCR,TV/VCR/DVD and VCR/DVD combos DVR Digital / Personal Video (SRP2006 only) Recorder (DVR / PVR), Tivo Example: s etting up the universal remote controls to operate your TV: 1 Switch ON the TV manually or use the original remote control for this. Tune to channel 1. 2 Press and hold the 5 sec. device selection button for 5 seconds until the red Setup light blinks.The remote control is now in setup mode. 4 EN EN 5