Philips TAUN102BK User manual
Philips TAUN102BK Manual
 |
View all Philips TAUN102BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Philips TAUN102BK manual content summary:
- Philips TAUN102BK | User manual - Page 1
TAUN102 User manual Register your product and get support at www.philips.com/support - Philips TAUN102BK | User manual - Page 2
- Philips TAUN102BK | User manual - Page 3
Contents 1 Important safety instructions 2 Hearing Safety 2 General information 2 2 Your Bluetooth in-ear headphones 3 What's in the box 3 Other devices 3 Overview of your Bluetooth in-ear headphones 3 3 Get started 4 Charge - Philips TAUN102BK | User manual - Page 4
1 Important safety instructions Hearing Safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level.The louder - Philips TAUN102BK | User manual - Page 5
Your Bluetooth in-ear headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips wireless in-ear headphones, you can: enjoy convenient wireless handsfree calls; enjoy - Philips TAUN102BK | User manual - Page 6
headphones with the mobile phone. For detailed information, refer to the user manual of your mobile phone. The following example shows you how to pair your mobile phone. Activate the Bluetooth feature of your mobile phone, select Philips UN102. Enter the headset password "0000" (4 zeros) if prompted. - Philips TAUN102BK | User manual - Page 7
/Bluetooth device or activate the Bluetooth feature after turning on the headphones, you have to reconnect the headphones and mobile phone/Bluetooth device manually. Note If the headphones fail to connect to any Bluetooth device within range in 5 minutes, it will switch off automatically to save the - Philips TAUN102BK | User manual - Page 8
Low battery level. Battery is fully charged. The red LED flashes 2 times for every 3 seconds until it is out of power Red LED is off, and blue LED is on. 6 EN - Philips TAUN102BK | User manual - Page 9
time for a full charge: 2 hours Rechargeable lithium polymer battery (80 mAh) Bluetooth 5.0 Bluetooth mono support (Headset Profile - HSP, Hands-Free Profile - HFP), Bluetooth stereo supported (Advanced Audio Distribution Profile - A2DP; Audio Video Remote Control Profile-AVRCP) Operating range: Up - Philips TAUN102BK | User manual - Page 10
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will 2014/53/EU.You can find the Declaration of Conformity on www.p4c.philips.com. - Philips TAUN102BK | User manual - Page 11
disposed of with normal household waste. We strongly advise you to take your product to an official collection point or a Philips service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate collection system for electrical and electronic products - Philips TAUN102BK | User manual - Page 12
in this user manual. Make sure supports A2DP (see 'Technical data' on page 7). I hear but cannot control music on my Bluetooth device (e.g. play/pause/skip forward/ backward). Make sure the Bluetooth audio source supports AVRCP (see 'Technical data' on page 7). For further support, visit www.philips - Philips TAUN102BK | User manual - Page 13
- Philips TAUN102BK | User manual - Page 14
aos requisitos técnicas aplicados. Para maiores informações, consulte a site da ANATEL: www.anatel.gov.br Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
 |
 |
TAUN102
User manual
Register your product and get support at
www.philips.com/support