Philips VR810BPH98 User manual

Philips VR810BPH98 Manual

Get Philips VR810BPH98 PDF manuals and user guides View all Philips VR810BPH98 manuals
Add to My Manuals
Save this manual to your list of manuals

Philips VR810BPH98 manual content summary:

  • Philips VR810BPH98 | User manual - Page 1
    Video Cassette Recorder VR1010BP VR810BPH Owner's Manual Important! Return your Warranty Registration Card within 10 days. See why inside.
  • Philips VR810BPH98 | User manual - Page 2
    As a member of the PHILIPS "family," you're entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
  • Philips VR810BPH98 | User manual - Page 3
    Overlap Warning • Quick Programming • Record Link • Remote Control with Capability to Operate TV, Cable Box 820-40 of the National Electrical Code, which provides guidelines for proper Philips Consumer Electronics. All rights reserved. Helpful Hint • Your new product, its packaging, and this manual
  • Philips VR810BPH98 | User manual - Page 4
    Time 19 Language Selection 20 Description of Controls Display Panel 21 Front Panel 22 Rear Panel 23 Remote Control Buttons 24-25 Setting the Remote Control to Operate a TV 26 Setting the Remote Control to Operate a Cable Box/DBS 27 On-Screen Status Displays 28 Basic Operations Playing 29
  • Philips VR810BPH98 | User manual - Page 5
    cellophane tape. VCR Maintenance/Video Head Cleaning • Remove any light adhesive stick-on notes from the video cassette before putting the the VCR display panel. Details are on page 79. Helpful Hints • The remote control and its batteries are supplied. • Do not mix alkaline and manganese batteries
  • Philips VR810BPH98 | User manual - Page 6
    6 Hookups without a Cable Box The basic VCR/TV connection - antenna/cable to VCR to TV - is shown below. If you have a Cable Box or a Direct Broadcast System, please refer to pages 8-9. After you hook up the VCR, please go to pages 10-11 to turn on the VCR. (The VR1010BP is illustrated here. The
  • Philips VR810BPH98 | User manual - Page 7
    Hookups without a Cable Box (cont'd) 7 3 Connect the RF coaxial cable (supplied) to the TV OUT Jack on the back of the VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on type or screw-on type of coaxial cable, whichever you prefer. A snap-on type is supplied.) Antenna or Cable
  • Philips VR810BPH98 | User manual - Page 8
    IN jack. CA7AN5BTΩLE/ TV's ANTENNA IN jack 3 RF coaxial cable Recording/Viewing Any Channel 1 With the VCR on and in VCR position (the VCR light will appear on the display panel), use the CH(annel) 8/9 button to set the VCR to the Cable Box/DBS output channel. 2 Set the TV
  • Philips VR810BPH98 | User manual - Page 9
    Box/DBS output channel. Then, with the VCR in VCR position (the VCR light will appear on the display panel), use the CH(annel) 8/9 button to select Press the VCR/TV button once to put the VCR in TV position. (The VCR light will disappear.) 3 Select the channel you want to watch at the Cable Box/DBS.
  • Philips VR810BPH98 | User manual - Page 10
    10 Turning on Your VCR • Before turning on your VCR, make sure there are batteries in the remote control and the VCR, TV, and Cable Box/DBS (if applicable) are connected. • The menus will appear every time you turn on the VCR until
  • Philips VR810BPH98 | User manual - Page 11
    Controller turned OFF. The display shown below will appear on the screen. Proceed to step 6. You may set up the Controller later by following the instructions on pages 50-54. If you do want to set up the Cable Box Controller now, follow steps 5-8 on pages 51-52 now. 7 Wait for
  • Philips VR810BPH98 | User manual - Page 12
    12 Automatic Channel Setup Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets you set up channels again. Make each entry within one minute of the previous entry. 1 Press the VCR button, then press the MENU button. VCR
  • Philips VR810BPH98 | User manual - Page 13
    Automatic Channel Setup (cont'd) 13 Adding/Deleting Channels 1 Press the VCR button, then press the MENU button. VCR SET UP TUNER SET UP INITIAL SET UP TAPE MANAGER SELECT: 89 END: MENU CONFIRM: OK 2 Press the PLAY 8 or STOP 9 button to select TUNER SET UP, then press the OK/STATUS button. 4
  • Philips VR810BPH98 | User manual - Page 14
    Channel Selection, or with Automatic PBS Channel Selection. Cable Box/DBS users must set the clock manually. Before you set the clock, make sure: • The VCR power is on. • The VCR light appears on the display panel. If it does not, press the VCR/TV button once. • Channels are set up. Details
  • Philips VR810BPH98 | User manual - Page 15
    Setting the Clock (cont'd) 15 4 Press the PLAY 8 or STOP 9 button repeatedly to set the TIME. Every time you press the PLAY 8 or STOP 9 button, the time changes in one-minute increments. If you press and hold the PLAY 8 or STOP 9 button, the time changes in 30-minute increments. When the time is
  • Philips VR810BPH98 | User manual - Page 16
    : 89 END: MENU CONFIRM: OK 3 Press the PLAY 8 or STOP 9 button to select CLOCK, then press the OK/STATUS button. CABLE BOX USERS SET CLOCK MANUALLY will appear briefly. (If AUTO CLOCK is set to OFF, TIME ZONE will not be available in the menu. If this happens, press the OK
  • Philips VR810BPH98 | User manual - Page 17
    Setting the Clock (cont'd) 17 Manual PBS Channel Selection 1 Press the VCR button, then press the MENU button. 2 Press the PLAY 8 or STOP 9 button to select INITIAL SET UP, then press
  • Philips VR810BPH98 | User manual - Page 18
    press the OK/STATUS button. 3 Press the PLAY 8 or STOP 9 button to select CLOCK, then press the OK/STATUS button. CABLE BOX USERS SET CLOCK MANUALLY will appear briefly. (If AUTO CLOCK is set to OFF, PBS CH. will not be available in the menu. If this happens, press the OK
  • Philips VR810BPH98 | User manual - Page 19
    : 89 END: MENU CONFIRM: OK 3 Press the PLAY 8 or STOP 9 button to select CLOCK, then press the OK/STATUS button. CABLE BOX USERS SET CLOCK MANUALLY will appear briefly. (If AUTO CLOCK is set to OFF, PBS CH. and TIME ZONE will not appear in the menu.) TIME 10:45AM DATE
  • Philips VR810BPH98 | User manual - Page 20
    20 Language Selection Follow the steps below to change the language of the on-screen displays and menus. 1 Press the VCR button, then press the MENU button. VCR SET UP TUNER SET UP INITIAL SET UP TAPE MANAGER SELECT: 89 END: MENU CONFIRM: OK 2 Press the PLAY 8 or STOP 9 button to select INITIAL
  • Philips VR810BPH98 | User manual - Page 21
    while recording on an S-VHS tape or in SVHS ET format. STOP/EJECT REC/OTR CHANNEL PAUSE/STILL PLAY TURBO DRIVE SP SLP Tape Speed Lights These lights indicate the current tape speed. This VCR will play tapes recorded in LP speed, but LP will not appear on the display panel. This
  • Philips VR810BPH98 | User manual - Page 22
    on VHS cassettes. The button will light. Details are on page 32. Remote Sensor Receives a signal from your remote control so you can operate your VCR Press to scan through the VCR's channels. During tape playback, press to manually adjust the tracking. Details are on page 76. Press to select an
  • Philips VR810BPH98 | User manual - Page 23
    ANTENNA IN Jack Connect your antenna or cable here. Details are on pages 6-9. CABLE BOX Jack Connect the Controller here. You may use the Controller with either a Cable Box or DBS receiver. Details are on pages 50-54. VIDEO IN Jack Connect a video cable coming from the VIDEO OUT jack of a camcorder,
  • Philips VR810BPH98 | User manual - Page 24
    display panel. During tape playback, press repeatedly to see the current time, remaining tape time, or realtime counter on the display panel. For some PHILIPS and PHILIPS MAGNAVOX TVs only: Press the TV button, then press this button to access the TV on-screen displays or to exit the TV menu. For
  • Philips VR810BPH98 | User manual - Page 25
    PHILIPS or PHILIPS MAGNAVOX TVs only: After pressing the TV button, press this button to access the TV menu. JOG/SHTL (Shuttle) Button Press to use the Jog Dial or the Shuttle Ring on the remote control. The button will light 7///--7 buttons to search for index codes recorded on the tape. Details are
  • Philips VR810BPH98 | User manual - Page 26
    your TV on the list below, and remember the two-digit number beside it. TV CODES EMERSON 14 GOLDSTAR (LG 04 HITACHI 12 JVC 05 MAGNAVOX . . . . .01, 02, 03 MITSUBISHI 13 PANASONIC 07, 17 PHILIPS 01, 02, 03 PHILIPS MAGNAVOX 01, 02, 03 RCA 10 SAMSUNG 18 SANYO 11 SHARP 16 SONY 09 TOSHIBA
  • Philips VR810BPH98 | User manual - Page 27
    17 UNIVERSAL . . . . . .16, 17, 25 VIDEOWAY . . . . . .03, 09, 22 ZENITH 03, 09, 22 MAGNAVOX DBS . . . .42, 43 RCA DBS 40 SONY DBS 41 2 Find the code for remote control, you may have to program the remote control again. • Write down your code so you will have it for future reference. • The remote
  • Philips VR810BPH98 | User manual - Page 28
    STOP 9 button to select VCR SET UP, then press the OK/STATUS button. DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: 89 CHANGE: ' END: MENU 3 Press the PLAY 8 or STOP 9 button to select ON SCREEN MODE. 4 Press
  • Philips VR810BPH98 | User manual - Page 29
    has been removed, playback will start automatically. 3 If playback does not start automatically, press the VCR button, then press the PLAY 8 button. The 3 light will appear on the VCR display panel. 4 5 Press the STOP 9 button to stop playback. 5 Press the REW(ind); button to rewind the tape
  • Philips VR810BPH98 | User manual - Page 30
    the CH(annel) 8/9 button or the Number buttons to select the channel to be recorded. 7 Press the REC(ord)/OTR button to start recording. The \ light will appear on the VCR display panel. If no tape is in the VCR, NO CASSETTE will appear on the screen briefly. 8 To pause the
  • Philips VR810BPH98 | User manual - Page 31
    /STATUS button. The first page of the VCR SET UP menu will appear. DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: 3 END: MENU 3 Press the STOP 9 button repeatedly so that the second page of the VCR
  • Philips VR810BPH98 | User manual - Page 32
    picture quality on VHS cassettes. 1 Before you begin the recording, press the S-VHS ET button on the front of the VCR so that the button lights. When the button is lit, recordings will be in S-VHS format. 1, 3 2 POWER VR 1010 4 HEAD HI-FI STEREO VIDEO CASSETTE RECORDER S-VHS ET VCR/TV
  • Philips VR810BPH98 | User manual - Page 33
    will appear on the screen while the channel you previously selected to record is being recorded. (The \ light will appear on the display panel.) 5 To return to the channel being recorded, use the TV remote control to select channel 03 or 04 (whichever channel the CH3/CH4 switch on the back of
  • Philips VR810BPH98 | User manual - Page 34
    recording length appears briefly on the screen and on the display panel. The \ light will flash on the display panel. (The recording length will not appear on MODE cannot be set to OFF. Details are on page 28.) The \ light will remain on the display panel. Helpful Hints • To check the time
  • Philips VR810BPH98 | User manual - Page 35
    button. DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: 3 END: MENU CHANGE: 3 6 Press the MENU button. Final Record Link instructions (as in step one above) will appear on the screen for about 30
  • Philips VR810BPH98 | User manual - Page 36
    , if applicable (you can request one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in your TV guide or the TV listings of your local newspaper. NOTE: If you are using a Cable Box/DBS and are not using the Controller, the Cable/TV
  • Philips VR810BPH98 | User manual - Page 37
    Setting Up the VCR Plus+ Programming System (cont'd) 37 2 Now, compare the channel numbers you have written into the VCR PLUS+ CH. and CABLE/TV CH. columns. You'll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that
  • Philips VR810BPH98 | User manual - Page 38
    is in VCR position (the VCR light will appear on the display panel). If the VCR light does not appear, press the VCR/ STOP 9 button to select VCR PLUS+, then press the OK/STATUS button. VCR PLUS+ PROG. CODE VCR PLUS+ L SAT/ CBL/DBS TV VCR VCR/TV POWER SMARTPICTURE 1 QUICK PROGRAMMING 1 -+*
  • Philips VR810BPH98 | User manual - Page 39
    minutes before a timer recording is set to begin. To remove the message, press the CLEAR button. • To check your timer recordings, see page 45. • The r light will flash if the clock is not set (if the clock setting was erased after you set up the timer recording). Be sure to set
  • Philips VR810BPH98 | User manual - Page 40
    the tape is long enough to record the program(s). • The VCR is in VCR position. The VCR light will appear on the display panel when the VCR is in VCR position. If the VCR light does not appear, press the VCR/TV button once. • When you use a Cable Box/DBS, timer recordings
  • Philips VR810BPH98 | User manual - Page 41
    REW FF PLAY 5 STOP VOL OK/STATUS CH MENU TIMER TURBO AUDIO/ SKIP TAPE TIMER MUTE SEARCH MANAGER JOG/SHTL REC /OTR REV FWD Instructions continue on page 42. Tape Speeds This chart shows the recording/playback time for Tape Speed Cassette type / Playback Time T160 T120 T60 T160
  • Philips VR810BPH98 | User manual - Page 42
    42 Quick Programming (cont'd) 7 Press the Number 3/DATE+ or Number 6/DATE- button to set the recording date. Every time you press a button, the date changes in one-day increments. If you press and hold a button, the date changes quickly. The day of the week will appear automatically. (You cannot
  • Philips VR810BPH98 | User manual - Page 43
    . If PROGRAM NOT COMPLETED appears, try again from step 1. 10 Press the POWER button to turn off the VCR. The r light will appear on the display panel. (The r light and the CassetteInside light will flash when you turn off the VCR if there is not a tape in the VCR.) The VCR must be
  • Philips VR810BPH98 | User manual - Page 44
    1 Insert a tape into the VCR and press the TURBO TIMER button on the remote control. The current time will appear on the display panel. (It will not OK/STATUS button. SLP VCR 5 The normal display will appear, and the r light will appear on the display panel. Press the POWER button to turn off the
  • Philips VR810BPH98 | User manual - Page 45
    Program Review 45 Checking, Editing, or Clearing Timer Recordings 1 Press the VCR button, then press the TIMER button. VCR PLUS+ QUICK PROGRAMMING PROGRAM REVIEW SELECT: ,9 END: TIMER CONFIRM: OK 2 Press the PLAY 8 or STOP 9 button to select PROGRAM REVIEW, then press the OK/STATUS button.
  • Philips VR810BPH98 | User manual - Page 46
    46 Program Overlap Warning If the timer recording you just set overlaps a previously set program, "PROGRAM NOT COMPLETED/PROGRAM OVERLAP" will appear on the screen for five seconds. To correct the overlapping recordings, follow the steps below. SAT/ CBL/DBS TV VCR PROGRAM NOT COMPLETED PROGRAM
  • Philips VR810BPH98 | User manual - Page 47
    9 button to select VCR SET UP, then press the OK/STATUS button. DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: - END: MENU 3 Press the STOP 9 button repeatedly to select TIMER REC SPEED, then press
  • Philips VR810BPH98 | User manual - Page 48
    ) The instructions on this power is on and the VCR is in VCR position. (The VCR light will appear on the display panel. If it does not, press the whichever channel the CH3/CH4 switch on VCR 2 is set to. 4 Point the remote control at VCR 2. Press the VCR button, then press the Number button 0. Press
  • Philips VR810BPH98 | User manual - Page 49
    on the VCR. You will not use the red audio cable. 2 On the VCR remote control, press the VCR button, then press the Number 0 button. Press the CH( Press the AUDIO DUBBING button on the front of the VCR. blinks, and and light on the VCR display panel. 5 On your audio equipment, find the starting point
  • Philips VR810BPH98 | User manual - Page 50
    VCR using the supplied adhesive. Make sure the Controller's transmitter (the light on the top of the Controller) is pointed toward the Cable Box/DBS remote sensor. (To find the Cable Box/DBS remote sensor, refer to the owner's manual of your Cable Box/DBS.) Cable Box/DBS Controller POWER VR 1010
  • Philips VR810BPH98 | User manual - Page 51
    . If CABLE BOX USERS SET CLOCK MANUALLY appears, follow steps 4-8 on page 15, then go to step 6 on page 52. MENU TIMER TURBO AUDIO/ SKIP TAPE TIMER MUTE SEARCH MANAGER JOG/SHTL REC /OTR REV FWD SELECT CODE NUMBER OF YOUR CABLE BOX 1 REFER TO INSTRUCTION BOOK SET: ,9 TEST: OK END: MENU
  • Philips VR810BPH98 | User manual - Page 52
    . .05, 15, 16, 17, 21, 24, 25 TELEVIEW 05, 16, 24 TOCOM 01, 04, 16 UNIKA 01, 17 UNIVERSAL . . . . . .16, 17, 25 VIDEOWAY . . . . . .03, 09, 22 ZENITH 03, 09, 22 Hints • If your Cable Box does not respond to any of the codes at step 7, the Controller will not change channels at the Cable Box
  • Philips VR810BPH98 | User manual - Page 53
    shown below will appear. If DBS RECEIVER USERS SET CLOCK MANUALLY appears, follow steps 4-8 on page 15, then go to step 6 on page 54. SELECT CODE NUMBER OF YOUR DBS RECEIVER 40 REFER TO INSTRUCTION BOOK SET: ,9 TEST: OK END: MENU Instructions continue on page 54. Helpful Hint • The Controller can
  • Philips VR810BPH98 | User manual - Page 54
    :OK END: MENU QUICK PROGRAMMING 1 -+* + 2 ABC + 3 DEF START STOP DATE 4 GHI - 5 JKL - 6 MNO VPS/PDC DAILY WEEKLY DBS CODES 7PQRS SPEED 8 TUV DBS/SAT 9WXYZ MAGNAVOX DBS 42, 43 RCA DBS 40 SONY DBS 41 7 6-8 ALT 0 CLEAR STILL/SLOW - .......... + .......... REW FF PLAY Wait for
  • Philips VR810BPH98 | User manual - Page 55
    Multi-Channel Television Sound System 55 This VCR can receive and record programs broadcast in stereo or second audio. It can also play back tapes recorded in stereo or second audio. • Second Audio You can program your VCR so you can hear a program that is being broadcast in second audio or a tape
  • Philips VR810BPH98 | User manual - Page 56
    9 button to select VCR SET UP, then press the OK/STATUS button. DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: - END: MENU 3 Press the STOP 9 button repeatedly to select NEXT PAGE. STEREO/SAP will
  • Philips VR810BPH98 | User manual - Page 57
    UP, then press the OK/STATUS button. DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: - END: MENU 3 Press the STOP 9 VCR button, then repeatedly pressing the AUDIO/MUTE button on the remote control.
  • Philips VR810BPH98 | User manual - Page 58
    button to select VCR SET UP, then press the OK/STATUS button. DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: - END: MENU 3 Press the STOP 9 button repeatedly to select VIDEO STABILIZER on the first
  • Philips VR810BPH98 | User manual - Page 59
    You can make the tape playback picture softer, sharper, more natural, or more distinct by adjusting the SmartPicture setting. Follow the steps below to adjust the SmartPicture setting. 1 Press the VCR button, then press the SMARTPICTURE button. The current setting will appear on the screen for about
  • Philips VR810BPH98 | User manual - Page 60
    UP, then press the OK/STATUS button. STOP VOL OK/STATUS CH MENU DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: 3 END: MENU 3 DSPC will be selected. Press the FF 3 button so that ON appears
  • Philips VR810BPH98 | User manual - Page 61
    recorded on a single tape. Fast forward or rewind to the next or previous index code on the tape by following the steps below. 1 Press the VCR button. Make sure the VCR is in VCR position. (The VCR light will appear on the display panel when the VCR is in VCR position.) If
  • Philips VR810BPH98 | User manual - Page 62
    panel. Now, when a tape has finished playing, the VCR will rewind it and start playback again. The VCR will play the tape 100 times. The 3 light on the display panel will flash during tape playback and while rewinding. TV programming will appear while the tape is rewinding. Repeat Playback will be
  • Philips VR810BPH98 | User manual - Page 63
    'd) 63 Viewing a Picture in Slow to Fast Motion 1 During tape playback or Still mode, press the JOG/SHTL (shuttle) button on the remote control. The JOG/SHTL button will light. 2 Next, turn the outer ring (the Shuttle ring) in either direction. The farther the ring is rotated, the faster the search
  • Philips VR810BPH98 | User manual - Page 64
    64 Tape Manager The Tape Manager will tell you: • on which tape you have recorded programs, • on which tape you have enough blank space for new recordings, and • what recordings are on a tape. Information about every recording made on this VCR will be memorized (date, start and stop time, length,
  • Philips VR810BPH98 | User manual - Page 65
    Tape Manager (cont'd) 65 Check Memory Follow the steps below to check the amount of memory used by the VCR for the Tape Manager. When all the memory is used, no more Tape Manager information can be stored. To store more information, you must first delete some information. Details are on page 72. 1
  • Philips VR810BPH98 | User manual - Page 66
    66 Tape Manager (cont'd) Edit Title When you record a TV program with this VCR, the VCR automatically memorizes the recording start and stop time, date, and channel for each program. You can edit the tape title and program titles as you like, as well as put the programs into a category. 1 Press
  • Philips VR810BPH98 | User manual - Page 67
    Tape Manager (cont'd) 67 6 To edit the Program Title and Category, press the PLAY 8 or STOP 9 button to select the program title you want to edit (it will be highlighted in red), then press the OK/STATUS button. TITLE will flash in the red box at the bottom of the list. ] 0114 03/18/00 ¡ 08:00PM
  • Philips VR810BPH98 | User manual - Page 68
    68 Tape Manager (cont'd) There are three ways to find the tape on which a program was recorded. • Tape Number: This allows you to review all the programs on each tape you have recorded with this VCR. Follow the steps on this page. • Date: This is useful if you remember when the desired program was
  • Philips VR810BPH98 | User manual - Page 69
    Tape Manager (cont'd) 69 Sorting by Date 1 Press the VCR button, then press the MENU button. Press the PLAY 8 or STOP 9 button to select TAPE MANAGER, then press the OK/STATUS button. TAPE MANAGER EDIT TITLE FIND TITLE FIND BLANK SPACE CHECK MEMORY TAPE MANAGER : ON SELECT: ,9 END: MENU
  • Philips VR810BPH98 | User manual - Page 70
    70 Tape Manager (cont'd) Sorting by Category 1 Press the VCR button, then press the MENU button. Press the PLAY 8 or STOP 9 button to select TAPE MANAG- ER, then press the OK/STATUS button. 2 Press the PLAY 8 or STOP 9 button to select FIND TITLE, then press the OK/STATUS button. FIND TITLE BY
  • Philips VR810BPH98 | User manual - Page 71
    Tape Manager (cont'd) 71 Find Blank Space With this function, you can find the blank space on each tape and use the space for recording. 1 Press the VCR button, then press the MENU button. Press the PLAY 8 or STOP 9 button to select TAPE MANAGER, then press the OK/STATUS button. TAPE MANAGER
  • Philips VR810BPH98 | User manual - Page 72
    72 Tape Manager (cont'd) Deleting Tape or Program Information If you do not want to keep tape manager information about a particular tape or program, you can erase the information by following the steps below. 1 Press the VCR button, then press the MENU button. Press the PLAY 8 or STOP 9 button to
  • Philips VR810BPH98 | User manual - Page 73
    You can disable the Tape Manager if you don't want to use it. 1 Press the VCR button, then press the MENU button. VCR SET UP TUNER SET UP INITIAL SET UP TAPE MANAGER SELECT: , 9 END: MENU CONFIRM: OK 2 Press the PLAY 8 or STOP 9 button to select TAPE MANAGER, then press the OK/STATUS button.
  • Philips VR810BPH98 | User manual - Page 74
    . • To stop a timer recording that is in progress, press and hold the POWER button on the remote control for more than 10 seconds. Child Lock will be cancelled and the recording will stop. 2 To /OTR REV FWD Helpful Hint • If you lose your remote control when Child Lock is on, contact Philips.
  • Philips VR810BPH98 | User manual - Page 75
    9 button to select VCR SET UP, then press the OK/STATUS button. DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: 3 END: MENU 3 Press the STOP 9 button repeatedly to select BLUE BACKGROUND on the first
  • Philips VR810BPH98 | User manual - Page 76
    plugged in). If a timer recording is programmed, the r and Cassette-Inside lights will flash on the VCR's display panel after you eject a tape with the manually (see below). Manual Tracking Adjustment • Press the CHANNEL 8/9 buttons on the front of the VCR or the CH(annel) 8/9 button on the remote
  • Philips VR810BPH98 | User manual - Page 77
    timed recording that starts immediately and records for 30 minutes to six hours, whichever you specify. Remote Control: the unit that came with your VCR; allows you to operate your VCR from a distance. The remote control also may operate some features of your TV, Cable Box, or DBS. RF coaxial cable
  • Philips VR810BPH98 | User manual - Page 78
    problems with your VCR, check the following list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service normally to the remote control. (For example The r and Cassette-Inside lights will blink on the display
  • Philips VR810BPH98 | User manual - Page 79
    manual for details. • When you connect the AUDIO OUT Jacks on your VCR to the AUDIO IN Jacks on your TV, the stereo light Details are on page 5. The remote control is not available or the remote control will not access the VCR's Only an authorized servicer should perform this service. The playback
  • Philips VR810BPH98 | User manual - Page 80
    Philips Consumer Electronics. • reception problems Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service manual instructions stated previously in the "What is Covered" section, or refer to the exchange instructions
  • Philips VR810BPH98 | User manual - Page 81
    Philips Service Solutions Group at 1-800-531-0039. To obtain a replacement product from Philips: 1. Complete the Exchange Form below. 2. Pack the product and its accessories (remote control, rf coaxial cable, owner's manual Service (UPS), insured and freight prepaid, to: Philips Consumer Electronics
  • Philips VR810BPH98 | User manual - Page 82
    82 Specifications Video Heads Four video heads with two Hi-Fi stereo heads Video Signal EIA standards; NTSC color Antenna VHF/UHF - 75 ohm external antenna terminal VHF Output Signal Channel 3 or 4 (switchable) 75 ohms unbalanced Power Requirement 120V AC; 60 Hz Power Consumption 27 W (for VR1010BP)
  • Philips VR810BPH98 | User manual - Page 83
    21 output channel 8-9 pause/still button 22 pbs channel selection automatic 18 manual 17 play 8 button 22, 24, 29 playback 29 options 62-63 , 50, 56 out jack 6-9, 23 position 22, 25 remote control codes............26 vcr button 25 light 21 position 22, 25 vcr plus+ channels 36-37 vcr
  • Philips VR810BPH98 | User manual - Page 84
    / SKIP TAPE TIMER MUTE SEARCH MANAGER JOG/SHTL REC /OTR REV FWD Remote Control 4835 218 37295 Two AA Batteries 4835 138 17012 RF Coaxial Cable, This owner's manual is made of recyclable materials. Remember to recycle! As an ENERGY STAR® Partner, Philips Consumer Electronics Company has
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Video Cassette Recorder
VR1010BP
VR810BPH
Owner’s Manual
Important!
Return your Warranty Registration
Card within 10 days. See why inside.