Philips VR960BPH User manual

Philips VR960BPH Manual

Get Philips VR960BPH PDF manuals and user guides View all Philips VR960BPH manuals
Add to My Manuals
Save this manual to your list of manuals

Philips VR960BPH manual content summary:

  • Philips VR960BPH | User manual - Page 1
    Video Cassette Recorder VR960BPH Owner's Manual Important! Return your Warranty Registration Card within 10 days. See why inside.
  • Philips VR960BPH | User manual - Page 2
    As a member of the PHILIPS "family," you're entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
  • Philips VR960BPH | User manual - Page 3
    manual. This manual has seven sections: Setting Up Your VCR; Description of Controls; Basic Operations; Recording; Playing; Additional Features; and Information You May Need. The instructions Link • Remote Control with Code VR960BPH Trade Name: Philips Responsible Party: Philips Consumer Electronics
  • Philips VR960BPH | User manual - Page 4
    Selection 20 Description of Controls Display Panel 21 Front Panel 22 Rear Panel 23 Remote Control Buttons 24-25 On-Screen Status Displays 26 Setting the Remote Control to Operate a TV 27 Setting the Remote Control to Operate a Cable Box/DBS 28 Basic Operations Playing 29 Recording 30
  • Philips VR960BPH | User manual - Page 5
    cellophane tape. VCR Maintenance/Video Head Cleaning • Remove any light adhesive stick-on notes from the video cassette before putting the the VCR display panel. Details are on page 67. Helpful Hints • The remote control and its batteries are supplied. • Do not mix alkaline and manganese batteries
  • Philips VR960BPH | User manual - Page 6
    6 Hookups without a Cable Box The basic VCR/TV connection - antenna/cable to VCR to TV - is shown below. If you have a Cable Box or a Direct Broadcast System, please refer to pages 8-9. After you hook up the VCR, please go to pages 10-11 to turn on the VCR. 1 Disconnect the antenna or cable from
  • Philips VR960BPH | User manual - Page 7
    Hookups without a Cable Box (cont'd) 7 3 Connect the RF coaxial cable (supplied) to the RF OUT Jack on the back of the VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on type or screw-on type of coaxial cable, whichever you prefer. A snap-on type is supplied.) S IN OUT V I D
  • Philips VR960BPH | User manual - Page 8
    OUT jack on the VCR to the TV's ANTENNA IN jack. Recording/Viewing Any Channel 1 With the VCR on and in VCR position (the VCR light will appear on the display panel), use the CH(annel) 8/9 button to set the VCR to the Cable Box/DBS output channel (channel 03 or
  • Philips VR960BPH | User manual - Page 9
    channel (03 or 04). Then, with the VCR in VCR position (the VCR light will appear on the display panel), use the CH(annel) 8/9 button to select Press the VCR/TV button once to put the VCR in TV position. (The VCR light will disappear.) 3 Select the channel you want to watch at the Cable Box/DBS.
  • Philips VR960BPH | User manual - Page 10
    10 Turning on Your VCR • Before turning on your VCR, make sure there are batteries in the remote control and the VCR, TV, and Cable Box/DBS (if applicable) are connected. • The menus will continue to appear every time you turn on the
  • Philips VR960BPH | User manual - Page 11
    Controller turned OFF. The display shown below will appear on the screen. Proceed to step 6. You may set up the Controller later by following the instructions on pages 49-53. If you do want to set up the Cable Box Controller now, follow steps 5-8 on pages 50-51 now. CONNECT ANTENNA
  • Philips VR960BPH | User manual - Page 12
    12 Automatic Channel Setup Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets you set up channels again. Make each entry within one minute of the previous entry. 1 Press the VCR button, then press the MENU button. VCR SET
  • Philips VR960BPH | User manual - Page 13
    Automatic Channel Setup (cont'd) 13 Adding/Deleting Channels 1 1 Press the VCR button, then press the MENU button. - - VCR SET UP TUNER SET UP INITIAL SET UP SELECT: 89 END: MENU CONFIRM: OK 2 Press the PLAY 8 or STOP 9 button to select TUNER SET UP, then press the OK/STATUS button. 4
  • Philips VR960BPH | User manual - Page 14
    Channel Selection, or with Automatic PBS Channel Selection. Cable Box/DBS users must set the clock manually. Before you set the clock, make sure: • The VCR power is on. • The VCR light appears on the display panel. If it does not, press the VCR/TV button once. • Channels are set up. Details
  • Philips VR960BPH | User manual - Page 15
    Setting the Clock (cont'd) 15 - - 4 Press the PLAY 8 or STOP 9 button repeatedly to set the TIME. Every time you press the PLAY 8 or STOP 9 button, the time changes in one-minute increments. If you press and hold the PLAY 8 or STOP 9 button, the time changes in 30-minute increments. When the
  • Philips VR960BPH | User manual - Page 16
    : 89 END: MENU CONFIRM: OK 3 Press the PLAY 8 or STOP 9 button to select CLOCK, then press the OK/STATUS button. CABLE BOX USERS SET CLOCK MANUALLY will appear briefly. (If AUTO CLOCK is set to OFF, TIME ZONE will not be available in the menu. If this happens, press the OK
  • Philips VR960BPH | User manual - Page 17
    Setting the Clock (cont'd) 17 Manual PBS Channel Selection 1 Press the VCR button, then press the MENU button. 2 Press the PLAY 8 or STOP 9 button to select INITIAL SET UP, then press
  • Philips VR960BPH | User manual - Page 18
    18 Setting the Clock (cont'd) Automatic PBS Channel Selection 1 Press the VCR button, then press the MENU button. 2 Press the PLAY 8 or STOP 9 button to select INITIAL SET UP, then press the OK/STATUS button. 3 Press the PLAY 8 or STOP 9 button to select CLOCK, then press the OK/STATUS button. (If
  • Philips VR960BPH | User manual - Page 19
    /STATUS button. (If AUTO CLOCK is set to OFF, PBS CH. and TIME ZONE will not appear in the menu.) CABLE BOX USERS SET CLOCK MANUALLY will appear on the screen briefly. TIME 10:45AM DATE 01/01/00 SATURDAY AUTO CLOCK ON PBS CH. AUTO D.S.T. AUTO TIME ZONE AUTO SET
  • Philips VR960BPH | User manual - Page 20
    20 Language Selection Follow the steps below to change the language of the on-screen displays and menus. 1 Press the VCR button, then press the MENU button. VCR SET UP TUNER SET UP INITIAL SET UP SELECT: 89 END: MENU CONFIRM: OK 2 Press the PLAY 8 or STOP 9 button to select INITIAL SET UP, then
  • Philips VR960BPH | User manual - Page 21
    VHS ET +8 4 0 6 -15dB L NORM VCR SP SLP MENU OK/ STATUS CHANNEL PLAY STOP/EJECT / TURBO DRIVE +8 4 0 6 -15dB NORM VCR SP SLP Tape Speed Lights These lights indicate the current tape speed. This VCR will play tapes recorded in LP speed, but LP will not appear on the display panel. This VCR
  • Philips VR960BPH | User manual - Page 22
    and off. Remote Sensor Receives a signal from your remote control so you can operate your VCR from a distance. Press the VCR button on the remote control before VCR's channels. During tape playback, press to manually adjust the tracking. Details are on page 64. Press to select an item in the
  • Philips VR960BPH | User manual - Page 23
    ANT(enna) IN Jack Connect your antenna or cable here. Details are on pages 6-9. AUDIO OUT Jacks Connect audio cables going to the AUDIO IN jacks of a camcorder, another VCR, or an audio system here. Details are on pages 48 and 55. AUDIO IN Jacks Connect audio cables coming from the AUDIO OUT jacks
  • Philips VR960BPH | User manual - Page 24
    24 Remote Control Buttons TV Button Press this button before pressing other TV operation time, the real-time counter, or the remaining tape time on the display panel. For some PHILIPS and PHILIPS MAGNAVOX TVs only: Press the TV button, then press this button to access the TV on-screen displays
  • Philips VR960BPH | User manual - Page 25
    light will not appear when the VCR is in TV position. After pressing the TV button, press this button to select TV mode or Auxiliary mode on some televisions. ALT(ernate) (Channel)/SPEED Button For some PHILIPS or PHILIPS MAGNAVOX search for index codes recorded on Hint • This remote control may or
  • Philips VR960BPH | User manual - Page 26
    STOP 9 button to select VCR SET UP, then press the OK/STATUS button. DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: 89 CHANGE: ' END: MENU 3 Press the PLAY 8 or STOP 9 button to select ON SCREEN MODE. 4 Press
  • Philips VR960BPH | User manual - Page 27
    of your TV on the list below, and remember the two-digit number beside it. TV CODES EMERSON 14 GOLDSTAR (LG 04 HITACHI 12 JVC 05 MAGNAVOX . . . . .01, 02, 03 MITSUBISHI 13 PANASONIC 07, 17 PHILIPS 01 PHILIPS MAGNAVOX 01, 02, 03 RCA 10 SAMSUNG 18 SANYO 11 SHARP 16 SONY 09 TOSHIBA 08
  • Philips VR960BPH | User manual - Page 28
    . Follow these steps to set the remote control code. 1 Turn on your Cable Box/DBS. Point the remote control at your Cable Box/DBS. 05, 16, 24 TOCOM 01, 04, 16 UNIKA 01, 17 UNIVERSAL 16, 17, 25 VIDEOWAY 03, 09, 22 ZENITH 03, 09, 22 MAGNAVOX DBS 42, 43 RCA DBS 40 SONY DBS 41 3 While you
  • Philips VR960BPH | User manual - Page 29
    has been removed, playback will start automatically. 3 If playback does not start automatically, press the VCR button, then press the PLAY 8 button. The 3 light will appear on the VCR display panel. 4 5 Press the STOP 9 button to stop playback. 5 Press the REW(ind); button to rewind the tape
  • Philips VR960BPH | User manual - Page 30
    ALT DBS 0 CLEAR STILL/SLOW - + REW FF PLAY STOP VOL OK/STATUS CH MENU TIMER - - 3 6 7 Press the REC(ord)/OTR button to start recording. The \ light will appear on the VCR display panel. If no tape is in the VCR, NO CASSETTE will appear on the screen briefly. TURBO AUDIO/ SKIP
  • Philips VR960BPH | User manual - Page 31
    /STATUS button. The first page of the VCR SET UP menu will appear. DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: 3 END: MENU PREVIOUS PAGE STEREO/SAP AUTO DBS RECORD LINK S-VHS MODE REAR A/V INPUT
  • Philips VR960BPH | User manual - Page 32
    32 S-VHS ET This VCR allows recording in Super VHS ET (Expansion Technology). You can play back cassettes recorded in S-VHS ET on a VCR equipped with S-VHS ET. You can record with S-VHS picture quality on VHS cassettes. 1 Before you begin the recording, press the S-VHS ET button on the front panel
  • Philips VR960BPH | User manual - Page 33
    will appear on the screen while the channel you previously selected to record is being recorded. (The \ light will appear on the display panel.) 5 To return to the channel being recorded, use the TV remote control to select channel 03 or 04 (whichever channel to which the CH3/CH4 switch on the
  • Philips VR960BPH | User manual - Page 34
    to record. 3 Press the REC(ord)/OTR button repeatedly until the desired recording length appears briefly on the screen and on the display panel. The \ light will flash on the display panel. (The recording length will not appear on the screen if ON SCREEN MODE is set to OFF.) - - CBL / DBS
  • Philips VR960BPH | User manual - Page 35
    ON. DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT MONO NEXT PAGE SELECT: ,9 CHANGE: 3 END : MENU CHANGE: 3 6 Press the MENU button. Final Record Link instructions will appear on the screen for about 30 seconds, then the VCR will
  • Philips VR960BPH | User manual - Page 36
    , if applicable (you can request one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in your TV guide or the TV listings of your local newspaper. NOTE: If you are using a Cable Box/DBS and are not using the Controller, the Cable/TV
  • Philips VR960BPH | User manual - Page 37
    Setting Up the VCR Plus+ Programming System (cont'd) 37 2 Now, compare the channel numbers you have written into the VCR PLUS+ CH. and CABLE/TV CH. columns. You'll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that
  • Philips VR960BPH | User manual - Page 38
    (s). • The VCR is in VCR position (the VCR light will appear on the display panel). If the VCR light does not appear, press the VCR/TV button once. to record. (This number is different for every program.) VCR PLUS+ PROG. CODE VCR PLUS+ 123L CONFIRM: OK CORRECT: CLEAR END: TIMER Helpful Hint • If
  • Philips VR960BPH | User manual - Page 39
    button to turn off the VCR. The VCR must be turned off for a timer recording to take place. The r light will appear on the display panel. The r light and the Cassette-Inside light will flash when you turn off the VCR if there is not a tape in the VCR. Turn off the VCR
  • Philips VR960BPH | User manual - Page 40
    the tape is long enough to record the program(s). • The VCR is in VCR position. The VCR light will appear on the display panel when the VCR is in VCR position. If the VCR light does not appear, press the VCR/TV button once. • When you use a Cable Box/DBS, timer recordings
  • Philips VR960BPH | User manual - Page 41
    SLOW - + REW FF PLAY 5 STOP VOL OK/STATUS CH MENU TIMER TURBO AUDIO/ SKIP REC END TIMER MUTE SEARCH SEARCH EJECT REC /OTR Instructions continue on page 42. Tape Speeds This chart shows the recording/playback time for Tape Speed Cassette type / Playback Time T160 T120 T60 T160
  • Philips VR960BPH | User manual - Page 42
    42 Quick Programming (cont'd) 7 Press the Number 3/DATE+ or Number 6/DATE- button to set the recording date. Every time you press a button, the date changes in one-day increments. If you press and hold a button, the date changes quickly. The day of the week will appear automatically. (You cannot
  • Philips VR960BPH | User manual - Page 43
    . If PROGRAM NOT COMPLETED appears, try again from step 1. 10 Press the POWER button to turn off the VCR. The r light will appear on the display panel. (The r light and the CassetteInside light will flash when you turn off the VCR if there is not a tape in the VCR.) The VCR must be
  • Philips VR960BPH | User manual - Page 44
    1 Insert a tape into the VCR and press the TURBO TIMER button on the remote control. The current time will appear on the display panel. (It will not appear STATUS button. SLP VCR 5 The normal display will appear, and the r light will appear on the display panel. Press the POWER button to turn off the
  • Philips VR960BPH | User manual - Page 45
    . Or, press the TIMER button to remove the menu. Helpful Hint • To stop a timer recording that is in progress, press the POWER button on the remote control. See page 66 for more hints.
  • Philips VR960BPH | User manual - Page 46
    46 Program Overlap Warning If the timer recording you just set overlaps a previously set program, "PROGRAM NOT COMPLETED/PROGRAM OVERLAP" will appear on the screen for five seconds. To correct the overlapping recordings, follow the steps below. PROGRAM NOT COMPLETED PROGRAM OVERLAP 1 The program
  • Philips VR960BPH | User manual - Page 47
    button to select VCR SET UP, then press the OK/STATUS button. ¡ DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: - END: MENU 3 Press the STOP 9 button repeatedly to select TIMER REC SPEED, then press
  • Philips VR960BPH | User manual - Page 48
    The instructions on this whichever channel the CH3/CH4 switch on VCR 2 is set to. 4 Point the remote control at VCR 2. Press the VCR button, then press the Number buttons 0, 0. REC(ord)/OTR button on VCR 2 at the same time. The \ light will appear on the VCR 2 display panel. 2) Use a video cable
  • Philips VR960BPH | User manual - Page 49
    For more information, please read page 8. Or, refer to the owner's manual of your Cable Box/DBS. Cable Box/DBS Controller Connect the Controller to the the Controller's transmitter (the light on the top of the Controller) is pointed toward the Cable Box/DBS remote sensor. Cable Box/DBS Controller
  • Philips VR960BPH | User manual - Page 50
    OK/STATUS button. The display shown below will appear. If CABLE BOX USERS SET CLOCK MANUALLY appears, follow steps 4-8 on page 15, then go to step 6 on page 51. SELECT CODE NUMBER OF YOUR CABLE BOX 1 REFER TO INSTRUCTION BOOK SET: ,9 TEST: OK END: MENU TURBO AUDIO/ SKIP REC END TIMER MUTE SEARCH
  • Philips VR960BPH | User manual - Page 51
    16, 17, 21, 24, 25 TELEVIEW 05, 16, 24 TOCOM 01, 04, 16 UNIKA 01, 17 UNIVERSAL 16, 17, 25 VIDEOWAY 03, 09, 22 ZENITH 03, 09, 22 7 Wait for a few seconds. Hints • If your Cable Box does not respond to any of the codes at step 7, the Controller will not change channels at the Cable Box
  • Philips VR960BPH | User manual - Page 52
    OK/STATUS button. The display shown below will appear. If DBS RECEIVER USERS SET CLOCK MANUALLY appears, follow steps 4-8 on page 15, then go to step 6 on page 52. SELECT CODE NUMBER OF YOUR DBS RECEIVER 40 REFER TO INSTRUCTION BOOK SET: ,9 TEST: OK END: MENU TURBO AUDIO/ SKIP REC END TIMER MUTE
  • Philips VR960BPH | User manual - Page 53
    A YES NO SELECT: 89 CONFIRM:OK END: MENU CBL / DBS TV VCR VCR/TV POWER SMARTPICTURE QUICK PROGRAMMING 1 +2 +3 START STOP DATE 4 -5 -6 DBS CODES MAGNAVOX DBS 42, 43 RCA DBS 40 SONY DBS 41 7 SPEED ALT DAILY 8 DBS 0 WEEKLY 9 CLEAR STILL/SLOW - + 7 6-8 REW PLAY FF Wait for
  • Philips VR960BPH | User manual - Page 54
    54 Multi-Channel Television Sound System This VCR can receive and record programs broadcast in stereo or second audio. It can also play back tapes recorded in stereo or second audio. • Second Audio You can program your VCR so you can hear a program that is being broadcast in second audio or a tape
  • Philips VR960BPH | User manual - Page 55
    STOP 9 button to select VCR SET UP, then press the OK/STATUS button. ¡ DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: - END: MENU 3 Press the PLAY 8 or STOP 9 button to select NEXT PAGE, then press
  • Philips VR960BPH | User manual - Page 56
    UP, then press the OK/STATUS button. ¡ DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: - END: MENU 3 Press the STOP 9 VCR button, then repeatedly pressing the AUDIO/MUTE button on the remote control.
  • Philips VR960BPH | User manual - Page 57
    9 button to select VCR SET UP, then press the OK/STATUS button. ¡ DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: - END: MENU 3 Press the STOP 9 button repeatedly to select VIDEO STABILIZER on the
  • Philips VR960BPH | User manual - Page 58
    58 SmartPicture You can make the tape playback picture softer, sharper, more natural, or more distinct by adjusting the SmartPicture setting. Follow the steps below to adjust the SmartPicture setting. 1 Press the VCR button, then press the SMARTPICTURE button. The current setting will appear on the
  • Philips VR960BPH | User manual - Page 59
    STOP 9 button to select VCR SET UP, then press the OK/STATUS button. ¡ DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: 3 END: MENU 3 DSPC will be selected. Press the FF 3 button so that ON (or OFF
  • Philips VR960BPH | User manual - Page 60
    recorded on a single tape. Fast forward or rewind to the next or previous index code on the tape by following the steps below. 1 Press the VCR button. Make sure the VCR is in VCR position. (The VCR light will appear on the display panel when the VCR is in VCR position.) If
  • Philips VR960BPH | User manual - Page 61
    panel. Now, when a tape has finished playing, the VCR will rewind it and start playback again. The VCR will play the tape 100 times. The 3 light on the display panel will flash during tape playback and while rewinding. TV programming will appear while the tape is rewinding. Repeat Playback will be
  • Philips VR960BPH | User manual - Page 62
    . • To stop a timer recording that is in progress, press and hold the POWER button on the remote control for more than 10 seconds. Child Lock will be cancelled and the recording will stop. 2 To EJECT REC /OTR Helpful Hint • If you lose your remote control when Child Lock is on, contact Philips.
  • Philips VR960BPH | User manual - Page 63
    button to select VCR SET UP, then press the OK/STATUS button. ¡ DSPC ON ON SCREEN MODE ON BLUE BACKGROUND ON TIMER REC SPEED MANUAL VIDEO STABILIZER OFF AUDIO OUT HIFI NEXT PAGE SELECT: ,9 CHANGE: 3 END: MENU 3 Press the STOP 9 button repeatedly to select BLUE BACKGROUND on the first
  • Philips VR960BPH | User manual - Page 64
    in). If a timer recording is programmed, the r and Cassette-Inside lights will flash on the VCR's display panel after you eject a tape with tracking manually (see below). Manual Tracking Adjustment • Press the CHANNEL 8/9 buttons on the front panel or the CH(annel) 8/9 button on the remote control
  • Philips VR960BPH | User manual - Page 65
    recording that starts immediately and records for 30 minutes to six hours, whichever you specify. Remote Control: the small electronic unit that came with your VCR; allows you to operate your VCR from a distance. The remote control also may operate some features of your TV, Cable Box, or DBS. RF
  • Philips VR960BPH | User manual - Page 66
    problems with your VCR, check the following list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service , the r and CassetteInside lights will blink on the display EJECT button on the remote control. • Gently
  • Philips VR960BPH | User manual - Page 67
    manual for details. • When you connect the AUDIO OUT Jacks on your VCR to the AUDIO IN Jacks on your TV, the stereo light Details are on page 5. The remote control is not available or the remote control will not access the VCR's Only an authorized servicer should perform this service. The playback
  • Philips VR960BPH | User manual - Page 68
    Philips Consumer Electronics. • reception problems Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service manual instructions stated previously in the "What is Covered" section, or refer to the exchange instructions
  • Philips VR960BPH | User manual - Page 69
    Philips Service Solutions Group at 1-800-531-0039. To obtain a replacement product from Philips: 1. Complete the Exchange Form below. 2. Pack the product and its accessories (remote control, rf coaxial cable, owner's manual Service (UPS), insured and freight prepaid, to: Philips Consumer Electronics
  • Philips VR960BPH | User manual - Page 70
    70 Specifications Video Heads Four video heads with two Hi-Fi stereo heads Video Signal EIA standards; NTSC color Antenna VHF/UHF - 75 ohm external antenna terminal VHF Output Signal Channel 3 or 4 (switchable) 75 ohms unbalanced Power Requirement 120V AC; 60 Hz Power Consumption 22 W Operating
  • Philips VR960BPH | User manual - Page 71
    operation indicators 21 output channel 8-9, 65 pbs channel selection automatic 18 manual 17 play button 22, 24, 29 playback 29 options 61 pluscode 27 controls 27 hookups 6-9, 48-49, 55 position 25 remote control codes 27 vcr button 24 light 21 position 21, 25 vcr plus+ channels 36-37
  • Philips VR960BPH | User manual - Page 72
    TIMER TURBO AUDIO/ SKIP REC END TIMER MUTE SEARCH SEARCH EJECT REC /OTR Remote Control 4835 218 37275 Two AA Batteries 4835 138 17012 RF Coaxial Cable, This owner's manual is made of recyclable materials. Remember to recycle! As an ENERGY STAR® Partner, Philips Consumer Electronics Company has
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Video Cassette Recorder
VR960BPH
Owner’s Manual
Important!
Return your Warranty Registration
Card within 10 days. See why inside.