Home » Pioneer Manuals » Plasma Televisions » Pioneer 504CMX » Manual Viewer

Pioneer 504CMX Command Reference

Pioneer 504CMX - PDP - 50" Plasma Panel Manual

UPC - 012562689784

View all Pioneer 504CMX manuals

Add to My Manuals
Save this manual to your list of manuals

Pioneer 504CMX manual content summary:

Pioneer 504CMX | Command Reference - Page 1
PDP-504CMX Plasma Display Panel RS-232C Commands COMMAND PROTOCOL MANUAL Manual Version 1.00 November 3, 2004 Pioneer Corporation Pioneer Electronics (USA) Inc. Industrial Solutions Business Group
Pioneer 504CMX | Command Reference - Page 2
purpose. Every precaution has been taken in the preparation of this manual. Although we tried to thoroughly check that all instructions and information in this manual are accurate and correct, Pioneer can not be and is not responsible, in whole or in part, for any damage or loss to your data and/or
Pioneer 504CMX | Command Reference - Page 3
Tables'). 2) Display screen in the RS-232C adjustment mode: • The screen is as shown in the figure on the right. -- 1 2 8 0 X 1 0 2 4@6 0 The set ID is display in the '- -' area at the upper left part of the screen but also be sure to control the power. If the power is ON when there is no signal,
Pioneer 504CMX | Command Reference - Page 4
Plasma Display (PDP-504CMX/50MXE1/50MXE1-S) RXD 3 2 TXD 2 3 CTS 5 2 GND 7 2 TXD 3 RXD 8 RTS 5 GND RXD 2 2 TXD 3 3 CTS 8 2 GND 5 2 TXD 3 RXD 8 RTS 5 GND * D-sub 9-pin/D-sub 25-pin conversion tables PON is received when the power is already ON, etc.), 'XXX' is returned. STX (02 hex) XXX
Pioneer 504CMX | Command Reference - Page 5
RS-232C Adjustment Mode 5.5.3 ID Assignment After connecting to the PC, an ID is assigned. The ID is assigned from the PC. Commands: (ID CLEAR) ........ Clears the assigned ID (ID SET Assigns an ID IDS is only effective when an ID is not assigned. Also, IDs are set starting from the
Pioneer 504CMX | Command Reference - Page 6
them at the same time could cause erroneous operation or be the cause of trouble, so do not connect them at the same time. Also, do not pair of combination IN terminals or combination OUT terminals. Doing so could cause trouble. It is possible to use a general-purpose mini DIN 6-pin (straight) cable
Pioneer 504CMX | Command Reference - Page 7
7 × 3.14 × 0.062 = 0.079 mm2 ≠ 0.08 mm2 PC RS-232C 5m OUT IN Combination cable 5m OUT IN OUT PDP-504CMX PDP-50MXE1 PDP-50MXE1-S 1 2 3 IN # Note For details on the number of displays that can be connected in series using the video OUT terminal (INPUT1, 4), refer to section 2.3, 'Part Names'. 5
Pioneer 504CMX | Command Reference - Page 8
RS-232C Adjustment Mode 5.5.5 List of RS-232C Commands How to read this Table • RS-232C adjustment validity : Indicates whether or not the RS-232C adjustment mode can be used. • Normal validity : Indicates whether or not the normal-operation
Pioneer 504CMX | Command Reference - Page 9
remote-control button control. ‡ MEMORY LOCK Sets the MEMORY LOCK. ‡ FAN: MAX Sets the fan rpm control to maximum. ‡ FUNCTION DEFAULT Executes FUCNTION DEFAULT. ¶ SCREEN MASK: ##### Displays the current SCREEN MASK setting. ¶ SCREEN the integrator and SCREEN adjustment values. ‡
Pioneer 504CMX | Command Reference - Page 10
INPUT3. ‡‡ Switches the main screen to INPUT4. ‡‡ Switches the main screen to INPUT5. ‡‡ Turns OFF the front indicator. Turns ON the front indicator. Disables LOUDNESS. Enables LOUDNESS. Displays the current COLOR DECODING. ¶ Sets COLOR DECODING to RGB (VIDEO). ‡ Sets COLOR DECODING
Pioneer 504CMX | Command Reference - Page 11
to PinP (lower left). ‡‡ Sets 2-screen operation to PoutP. ‡‡ Turns OFF video muting. ¶¶ Turns ON video muting. ¶¶ Turns ORBITER OFF. ‡ Turns ORBITER ON. ‡ Turns the center brightness enhancement OFF. Turns the center brightness enhancement ON. Power OFF Power ON Displays the current
Pioneer 504CMX | Command Reference - Page 12
size to Dot by Dot or PARTIAL. Sets the screen size to 4:3. Sets the screen size to FULL or FULL1080i. Sets the screen size to ZOOM. Sets the screen size to CINEMA. Sets the screen size to WIDE. Sets the screen size to FULL1035i. Sets the screen size to UNDERSCAN. Adjusts the TINT. Adds 10 to the
Pioneer 504CMX | Command Reference - Page 13
the internal microcomputer of the plasma display to a PC. • Power data Screen size data First character Generation data: 4 (fixed) Second character Inch data: 4 (43 inch), 5 (50 inch) Third character Destination data: M (fixed) First character Power state & signal state Second character PN (POWER
Pioneer 504CMX | Command Reference - Page 14
SIZE CLOCK PHASE Input function data (main) Screen size data Check sum Size 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 1 Byte 2 Byte Remarks # # # # Outputs dummy data for PC digital and Video signal. # Outputs dummy data for PC digital and Video signal. # • 7 and 8 output the same contents
Pioneer 504CMX | Command Reference - Page 15
DECODING 10 COLOR SYSTEM 11 SIGNAL FORMAT 12 Dummy data 13 Input function data (main) 14 Screen size data 15 Check sum Size 1 Byte 1 Byte 2 Byte 1 Byte 1 Byte 1 video card is mounted.) S02 WVGA or WXGA or SXGA+ S03 525p or 750p (Either one can be selected only when a video card is mounted.)
Pioneer 504CMX | Command Reference - Page 16
Order Data contents 1 ENERGY SAVE 2 ORBITER 3 MASK CONTROL 4 AUDIO OUT 5 SCREEN MASK 6 SIDE MASK MODE 7 R SIDE MASK LEVEL 8 G SIDE MASK LEVEL FAN CONTROL 16 COLOR MODE 17 PRO USE UNDERSCAN 18 PRO USE COLOR OFF 19 FRC 20 Dummy data 21 Input function data (main) 22 Screen size data 23 Check sum
Pioneer 504CMX | Command Reference - Page 17
added the result is 1F8 (hex) As the data format, F5 is converted to ASCII code and sent. The following data is output from the plasma display side. STX GET command Data 02 (hex) GAA 100 (missing data) 28 Check Sum F5 ETX 03 (hex) Note: The returned data group will
Pioneer 504CMX | Command Reference - Page 18
PDP-504CMX RS-232C Command Protocol Manual Pioneer Electronics (USA) Inc. Industrial Solutions Business Group 2265 East 220th Street Long Beach, California 90810 United States of America (310) 952-2000 http://www.pioneerelectronics.com