Pioneer AVH-P3200BT Installation Manual - Page 6
Connecting the power cord - navigation
UPC - 012562975719
View all Pioneer AVH-P3200BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Connecting the units Connecting the power cord Navigation unit can be connected (AVIC-U220(sold separately)). Please contact your dealer to inquire about the connectable navigation unit. 26 pin cable (Supplied with Navigation unit) Insert the 26 pin cable in the direction indicated in the figure. RGB input This product Antenna input AUX jack (3.5 ø) (AVH-P4200DVD only) Fuse (10 A) Use a mini plug cable to connect with auxiliary device. Microphone input (AVH-P3200BT only) (AVHP4200DVD only) Yellow Connect to the constant 12 V supply terminal. Orange/white Connect to lighting switch terminal. Fuse resistor Red Connect to terminal controlled by ignition switch (12 V DC). Fuse resistor Black (chassis ground) Connect to a clean, paint-free metal location. Front speaker Left Rear speaker or Subwoofer (4 Ω) White Gray White/black Green Gray/black Violet Green/black Violet/black Front speaker Right Rear speaker or Subwoofer (4 Ω) When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not connect anything to Green and Green/black leads. Not used. Green Green/black Violet Violet/black Subwoofer (4 Ω) × 2 6