Pioneer AVIC-F90BT Owner's Manual - Page 121

Using the external unit (EXT1, EXT2) Chapter 24 The term "external unit" refers to future Pioneer devices that are not currently planned for, or to devices that allow control of basic functions although they are not fully controlled by the navigation system. Two external units can be controlled by this navigation system. When two external units are connected, the navigation system allocates them as external unit 1 or external unit 2. For details of the connection method, refer to "Installation Manual". For details concerning operation, refer to the external unit's operation manual. This section provides information on external unit operations with the navigation system that differ from those described in the external unit's operation manual. p Operation varies depending on the external unit connected. (In some cases, the external unit may not respond.) Reading the screen 12 3 1 Source icon Shows which source has been selected. 2 External unit indicator Displays the information that send by connected external units. 3 Auto/Manual mode indicator Shows the current mode. Using the touch panel keys % Touch [EXT1] or [EXT2] on the "AV Source" menu to select the external unit. = For details concerning operations, refer to Screen switching overview on page 18. 12 3 4 5 6 7 1 Send a band command Touch to send a band command to the external unit. p Operation varies depending on the external unit connected. (In some cases, the external unit may not respond.) 2 Recalls equalizer curves = For details, refer to Recalling equalizer curves on page 139. 3 Send an [a], [b], [c], or [d] command Touch to operate the external unit. p Operation varies depending on the external unit connected. (In some cases, some functions may not be used until you touch and hold the key.) 4 Switching the automatic and manual function You can turn automatic and manual function on or off. You can switch between Auto and Manual functions of the external unit connected. Initially, this function is set to Auto. p Operating commands set for Auto and Manual operations vary depending on the external unit connected. 5 Displaying the map screen 6 Send a 1 key to 6 key command Using the external unit (EXT1, EXT2) En 121