Pioneer AVIC-X930BT Owner's Manual - Page 14

Chapter 02 Basic operation a Multi-control (Volume knob/ /MUTE) ! Rotate to adjust the AV (Audio and Video) source volume. ! Press the center of Multi-control to hear the route guidance. ! Press and hold the center of Multi-control to mute the AV (Audio and Video) source. To cancel the muting, press and hold it again. b Front panel c Detach button Press to remove the front panel from the navigation system. = For details, refer to Removing the front panel on this page. Protecting your product from theft p This function is available for AVIC-X930BT and AVIC-X9310BT. The front panel can be detached from the navigation system to discourage theft, as described below. 1 Press and hold the Detach button, and slide it down. When you release your finger, the bottom of the front panel separates slightly from the navigation system. 2 Gently grip the bottom of the front panel and slowly pull it outward. CAUTION ! Do not expose the front panel to excessive shock or disassemble it. ! Never grip the buttons tightly or use force when removing or attaching. ! Keep the front panel out of reach of small chil- dren to prevent them from putting it in their mouths. ! After removing the front panel, keep it in a safe place so it is not scratched or damaged. ! Keep the front panel out of direct sunlight and high temperatures. ! When removing or attaching the front panel, do so after turning the ignition switch off (ACC OFF). Removing the front panel p The navigation system cannot be operated while the front panel is removed from the navigation system. Front panel Attaching the front panel 1 Slide the front panel all the way into the navigation system. Make sure the front panel is securely connected to the mounting hooks of the navigation system. 2 Push the lower part of the front panel until you hear a click. If you fail to successfully attach the front panel to the navigation system, try again but be careful not to force it as the panel could be damaged. 14 En