Pioneer AVIC-X930BT Owner's Manual - Page 149

Using the external unit (EXT1, EXT2) Using the touch panel keys Chapter 31 Using the external unit (EXT1, EXT2) 6 5 4 1 2 3 1 Recalls equalizer curves = For details, refer to Using the equalizer on page 175. 2 Sends a band command Touch to send a band command to the external unit. p Operation varies depending on the external unit connected. (In some cases, the external unit may not respond.) 3 Uses [F1] through [F4] to operate the external unit The external unit can be operated by transmitting the operating commands set to "F1" through "F4". p The operating commands set to "F1" through "F4" vary depending on the external unit. p Some functions may not be used until you touch and hold the key. 4 Switches between automatic and manual function You can turn automatic and manual function on or off. You can switch between "Auto" and "Manual" functions of the external unit connected. Initially, this function is set to "Auto". p Operating commands set for "Auto" and "Manual" operations vary depending on the external unit connected. 5 Sends a command [a], [b], [c], or [d] Touch to operate the external unit. p Operation varies depending on the external unit connected. (In some cases, some functions may not be used until you touch and hold the key.) 6 Sends a [1] key to [6] key command The external unit can be operated by transmitting the operating commands set to "1" key through "6" key. p Operation varies depending on the external unit connected. (In some cases, some functions may not be used until you touch and hold the key.) En 149