Pioneer AVIC-X930BT Owner's Manual - Page 15

Basic operation Chapter 02 Basic operation Adjusting the LCD panel angle p This function is available for AVIC-Z130BT only. WARNING When opening, closing and adjusting the angle of the LCD panel, be careful not to get your fingers caught. CAUTION Do not open or close the LCD panel by force. This may cause malfunction. 1 Press the h button. The "Monitor Setup" screen appears. 2 Touch or to adjust the angle. CAUTION ! Do not open or close the LCD panel by force. This may cause malfunction. ! Do not operate this navigation system until the LCD panel completely opens or closes. If this navigation system is operated while the LCD panel is opening or closing, the LCD panel may stop at that angle for safety. ! Do not place a glass or a can on the open LCD panel. Doing so may break this navigation system. ! Do not insert anything other than a disc into the disc-loading slot. 1 Press the h button. The "Monitor Setup" screen appears. 2 Touch [Open]. 3 Touch . p The adjusted angle of the LCD panel will be memorized and the LCD panel will automatically return to that angle the next time the LCD panel is opened or closed. The LCD panel opens, and the disc-loading slot appears. 3 Insert a disc into the disc-loading slot. Inserting and ejecting a disc Inserting a disc (for AVIC-Z130BT) WARNING ! When opening, closing and adjusting the angle of the LCD panel, be careful not to get your fingers caught. ! Do not use with the LCD panel left open. If LCD panel is left open, it may result in injury in the event of an accident. The disc is loaded, and the LCD panel closes. En 15