Pioneer AVIC-Z130BT Owner's Manual - Page 172

Chapter 32 Customizing preferences p Both rear speaker leads output and RCA rear output are switched simultaneously in this setting. (When you use the product without RCA rear output, this setting only applies to the rear speaker leads.) p "Rear SP" can be set only when the source is selected to "Off". 1 Display the "AV System Settings" screen. = For details, refer to Displaying the screen for AV system settings on page 170. 2 Touch [Rear SP]. Each touch of [Rear SP] changes the settings as follows: ! Full When no subwoofer is connected to the rear output, select "Full". ! Sub. W When a subwoofer is connected to the rear output, select "Sub. W". Switching the muting/ attenuation timing You can mute the AV source volume or attenuate the output signal. p Even if this setting is "Off", the navigation system will mute or attenuate the AV source volume when the mute signal is output via MUTE lead. 1 Display the "AV System Settings" screen. = For details, refer to Displaying the screen for AV system settings on page 170. 2 Touch [Mute]. Each touch of [Mute] changes the settings as follows: AVIC-Z130BT ! Guide/Tel/VR: The volume is muted or attenuated according to the following conditions. - When the navigation outputs the guidance voice. - When you use a cellular phone via Bluetooth technology (dialing, talking, incoming call). - When the voice recognition mode is activated. ! Tel/VR: The volume is muted or attenuated according to the following conditions. - When you use a cellular phone via Bluetooth technology (dialing, talking, incoming call). - When the voice recognition mode is activated. ! Off: The volume does not change. AVIC-X930BT, AVIC-X9310BT ! Guide/Tel: The volume is muted or attenuated according to the following conditions. - When the navigation outputs the guidance voice. - When you use a cellular phone via Bluetooth technology (dialing, talking, incoming call). ! Tel: The volume is muted or attenuated when you use a cellular phone via Bluetooth technology (dialing, talking, incoming call). ! Off: The volume does not change. p AV source volume returns to normal when the corresponding action ends. Switching the muting/ attenuation level You can select the muting/attenuation level of "Mute". This setting is also effective for a mute signal that has been received from the MUTE lead connected to the navigation unit. p This menu is not available when AV source is "Off". 1 Display the "AV System Settings" screen. = For details, refer to Displaying the screen for AV system settings on page 170. 2 Touch [Mute Level]. Each touch of [Mute Level] changes the settings as follows: 172 En