Pioneer DDJ-T1 Owner's Manual - Page 12

! To install or uninstall the driver software, you need to be authorized by the administrator of your computer. Log on as the administrator of your computer before proceeding with the installation. ! If you connect this unit to your computer without installing the driver software first, an error may occur on your computer depending on the system environment. ! If installation of the driver software is interrupted after it has started, start the installation procedure over again from the beginning. Supported operating systems Windows® 7 Home Premium/Professional/ 32-bit version 1 Ultimate 64-bit version 11 Windows Vista® Home Basic/Home Pre- 32-bit version 1 mium/ Business/ Ultimate 64-bit version 11 Windows® XP Home Edition/Professional (SP2 or later) 32-bit version 1 1 When using a 64-bit version of Windows, the driver software can only be used for 32-bit applications. Click the Windows [Start] menu>[All Programs]> [Pioneer]>[DDJ]>[DDJ ASIO Settings Utility]. 1 Insert the included driver software CD-ROM into the computer's CD drive. 2 Once the CD-ROM's menu is displayed, double-click [Pioneer_DDJ_Driver_XXXXX.exe]. 3 Proceed with installation according to the instructions on the screen. If [Windows Security] appears on the screen while the installation is in progress, click [Install this driver software anyway] and continue with the installation. ! When installing on Windows XP If [Hardware Installation] appears on the screen while the installation is in progress, click [Continue Anyway] and continue with the installation. ! When the installation program is completed, a completion message appears. ! If the buffer size is made large, drops in audio data (breaks in the sound) occur less easily, but the time lag due to the delay in the transfer of the audio data (latency) increases. Checking the version of the driver software Click the Windows [Start] menu>[All Programs]> [Pioneer]>[DDJ]>[DDJ Version Display Utility]. Connecting this unit and computer 1 Connect this unit to your computer via a USB cable. For details about connections, see Connections on page 13. 2 Slide the [ON/OFF] switch to the [ON] side. Turn on the power of this unit. ! The message [Installing device driver software] may appear when this unit is first connected to the computer or when it is connected to a different USB port on the computer. Wait awhile until the message [Your devices are ready for use] appears. Adjusting the buffer size This unit functions as an audio device conforming to the ASIO standards. ! If an application using this unit as the default audio device (DJ soft- ware, etc.) is running, quit that application before adjusting the buffer size. ! You can check the firmware version of this unit on the screen. ! The firmware version is not displayed when this unit is not connected to the computer or when this unit and computer are not properly communicating. Checking the latest information on the driver software For the latest information on the driver software for exclusive use with this unit, visit our website shown below. http://www.prodjnet.com/support/ 12 En