Pioneer DEH 1500 Owner's Manual - Page 10

Section HHHHHHHHHHHHHH 05 Built-in CD Player Playing a CD 1 2 1 Track number indicator Shows the track currently playing. 2 Play time indicator Shows the elapsed playing time of the current track. 1 Insert a CD into the CD loading slot. Playback will automatically start. Notes ! The built-in CD player plays one, standard, 12cm or 8-cm (single) CD at a time. Do not use an adapter when playing 8-cm CDs. ! Do not insert anything other than a CD into the CD loading slot. ! If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press CD EJECT to eject the disc, and check the disc for damage before inserting the disc again. ! If the built-in CD player does not operate properly, an error message such as ERROR-11 may be displayed. Refer to Understanding built-in CD player error messages on page 17. CD loading slot # You can eject a CD by pressing CD EJECT. 2 After a CD has been inserted, press SOURCE to select the built-in CD player. 3 Use VOLUME to adjust the sound level. When you press VOLUME up/+, the volume is raised and when pressed down/, the volume is lowered. 4 To perform fast forward or reverse, press and hold c or d. 5 To skip back or forward to another track, press c or d. Pressing d skips to the start of the next track. Pressing c once skips to the start of the current track. Pressing again will skip to the previous track. Playing tracks in a random order Random play lets you play back tracks on the CD in a random order. 1 Press 4 to turn random play on. RDM appears in the display. Tracks will play in a random order. 2 Press 4 to turn random play off. Tracks will continue to play in order. Repeating play Repeat play lets you hear the same track over again. 1 Press 5 to turn repeat play on. RPT appears in the display. The track currently playing will play and then repeat. 10 En