Pioneer DEH 1500 Owner's Manual - Page 12

Section HHHHHHHHHHHHHH 06 Audio Adjustments Introduction of audio adjustments 12 1 Audio display Shows the audio adjustments status. 2 LOUD indicator Appears in the display when loudness is turned on. % Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)EQ-L (equalizer) LOUD (loudness)FIE (front image enhancer)SLA (source level adjustment) # When selecting the FM tuner as the source, you cannot switch to SLA. # To return to the display of each source, press BAND. Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press AUDIO to select FAD. Press AUDIO until FAD appears in the display. # If the balance setting has been previously adjusted, BAL will be displayed. 2 Press a or b to adjust front/rear speaker balance. Each press of a or b moves the front/rear speaker balance towards the front or the rear. FAD F15  FAD R15 is displayed as the front/ rear speaker balance moves from front to rear. # FAD 0 is the proper setting when only two speakers are used. 3 Press c or d to adjust left/right speaker balance. When you press c or d, BAL 0 is displayed. Each press of c or d moves the left/right speaker balance towards the left or the right. BAL L9  BAL R9 is displayed as the left/right speaker balance moves from left to right. Using the equalizer The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired. Recalling equalizer curves There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves: Display Equalizer curve SPR-BASS Super bass POWERFUL Powerful NATURAL Natural VOCAL Vocal CUSTOM Custom EQ FLAT Flat 12 En