Pioneer DEH-P3100UB Owner's Manual - Page 23
Audio Adjustments, Recalling equalizer curves
UPC - 012562943497
View all Pioneer DEH-P3100UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Audio Adjustments Section 03 English Recalling equalizer curves There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves. Display Equalizer curve POWERFUL Powerful NATURAL Natural VOCAL Vocal CUSTOM Custom FLAT Flat SUPER BASS Super bass ! CUSTOM is an adjusted equalizer curve that you create. ! When FLAT is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve. 1 Use MULTI-CONTROL to select PRESET EQUALIZER in the audio function menu. 2 Press MULTI-CONTROL to display the setting mode. 3 Turn MULTI-CONTROL to select the equalizer. # You can also perform the same operations by pushing MULTI-CONTROL up or down. 4 Press MULTI-CONTROL to determine the selection. # Even if the menu has been cancelled before determination, operation is settled. Adjusting equalizer curves The factory supplied equalizer curves can be adjusted to a fine degree (nuance control). 1 Use MULTI-CONTROL to select EQ SETTING 1 in the audio function menu. 2 Press MULTI-CONTROL to display the setting mode. 3 Press MULTI-CONTROL to select the segment you wish to set. Press MULTI-CONTROL repeatedly to switch the segment in the following order: L (low)-M (mid)-H (high) 4 Turn MULTI-CONTROL to adjust the level of the equalization band. +6 to -6 is displayed as the level is increased or decreased. # You can also perform the same operations by pushing MULTI-CONTROL up or down. # You can then select another band and adjust the level. Fine-adjusting equalizer curve You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (LOW/MID/HI). Level (dB) Center frequency Q=2N Q=2W Frequency (Hz) 1 Use MULTI-CONTROL to select EQ SETTING 2. 2 Press MULTI-CONTROL to display the setting mode. 3 Press MULTI-CONTROL to select the segment you wish to set. Press MULTI-CONTROL repeatedly to switch the segment in the following order: Band-Frequency-Q factor 4 Turn MULTI-CONTROL to adjust the selected segement. Band LOW (low)-MID (mid)-HI (high) Frequency Low: 40HZ-80HZ-100HZ-160HZ Mid: 200HZ-500HZ-1KHZ-2KHZ High: 3KHZ-8KHZ-10KHZ-12KHZ En 23