Pioneer DEH-P3100UB Owner's Manual - Page 24
Adjusting loudness, Using subwoofer output, Audio Adjustments, Adjusting subwoofer settings
UPC - 012562943497
View all Pioneer DEH-P3100UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Section 03 Audio Adjustments Q factor 2W-1W-1N-2N # You can also perform the same operations by pushing MULTI-CONTROL up or down. Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Use MULTI-CONTROL to select LOUDNESS in the audio function menu. 2 Press MULTI-CONTROL to display the setting mode. 3 Use MULTI-CONTROL to select the desired setting. Turn to change the setting. LOW (low)-MID (mid)-HIGH (high)-OFF (off) # You can also perform the same operations by pushing MULTI-CONTROL up or down. 4 Press MULTI-CONTROL to determine the selection. # Even if the menu has been cancelled before determination, operation is settled. Using subwoofer output This unit is equipped with a subwoofer output which can be turned on or off. Also, phase can be selected between normal and reverse. 1 Press SW/BASS to display the subwoofer setting mode. Press SW/BASS repeatedly to switch between the subwoofer setting modes in the following order. SW SETTING 1 (subwoofer on/off setting) setting mode-SW SETTING 2 (subwoofer setting) setting mode 2 Select SW SETTING 1 setting mode. 3 Turn MULTI-CONTROL to select the desired setting. NORMAL (normal phase)-REV (reverse phase)-OFF (subwoofer off) # You can also perform the same operations by pushing MULTI-CONTROL up or down. 4 Press MULTI-CONTROL to determine the selection. # Even if the menu has been cancelled before determination, operation is settled. Note You can also switch to this setting mode in the menu that appears by using MULTI-CONTROL. Adjusting subwoofer settings When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoofer. ! When the subwoofer output is on, you can select SW SETTING 2. 1 Press SW/BASS to display the subwoofer setting mode. Press SW/BASS repeatedly to switch between the subwoofer setting modes in the following order. SW SETTING 1 (subwoofer on/off setting) setting mode-SW SETTING 2 (subwoofer setting) setting mode 2 Select SW SETTING 2 setting mode. 3 Press MULTI-CONTROL to select the segment you wish to set. Press MULTI-CONTROL repeatedly to switch the segment in the following order: Cut off frequency-Level 4 Turn MULTI-CONTROL to adjust the selected segement. Cut off frequency 50HZ-63HZ-80HZ-100HZ-125HZ Level +6 to -24 is displayed as the level is increased or decreased. 24 En