Pioneer DEH-P3100UB Owner's Manual - Page 29
Using the AUX source, Turning the clock display, on or off, Switching the display - owners manual
UPC - 012562943497
View all Pioneer DEH-P3100UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Other Functions Section 05 English Using the AUX source Up to two auxiliary devices such as VCR or portable devices (sold separately) can be connected to this unit. When connected, auxiliary devices are automatically read as AUX sources and assigned to AUX1 or AUX2. The relationship between AUX1 and AUX2 sources is explained below. About AUX1 and AUX2 There are two methods to connect auxiliary devices to this unit. AUX1 source: When connecting auxiliary device using a stereo mini plug cable % Insert the stereo mini plug into the input jack on this unit. For more details, refer to Head unit on page 8. This auxiliary device is automatically set to AUX1. AUX2 source: When connecting auxiliary device using an IPBUS-RCA Interconnector (sold separately) % Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separately) to connect this unit to auxiliary device featuring RCA output. For more details, refer to the IP-BUS-RCA Interconnector owner's manual. This auxiliary device is automatically set to AUX2. # You can only make this type of connection if the auxiliary device has RCA outputs. Selecting AUX as the source % Press SRC/OFF to select AUX as the source. # If the auxiliary setting is not turned on, AUX cannot be selected. For more details, refer to Switching the auxiliary setting on page 26. Turning the clock display on or off You can turn the clock display on or off. ! Even when the sources are off, the clock display appears on the display. % Press CLOCK/DISP OFF to turn the clock display on or off. Each press of CLOCK/DISP OFF turns the clock display on or off. # The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds. Switching the display indication and button illumination Display indication and button illumination can be switched on or off. % Press and hold CLOCK/DISP OFF. Pressing and holding CLOCK/DISP OFF switches the display indication and button illumination on or off. # While the display indication is turned off, CLOCK/DISP OFF button lights up. # Even if the display indication is turned off, operation can be conducted. If operation is conducted while the display indication is off, display will light up for a few seconds and then turn off again. En 29