Pioneer DEH-P3100UB Owner's Manual - Page 40

Section 06 Available accessories # If you do not operate the list within about 30 seconds, the display is automatically returned to the ordinary display. Note You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the channel display. Switching the XM channel select mode You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category. % Press S.Rtrv/SAT repeatedly to select the desired channel select setting. MODE CH NUMBER (channel number select setting)-MODE CATEGORY (channel category select setting) # If you do not operate the function within about eight seconds, the display is automatically returned to the channel display. Note You can also perform this operation in the menu that appears by using MULTI-CONTROL. Selecting a channel in the channel category 1 Select the channel select settings to MODE CATEGORY. Refer to Switching the XM channel select mode on this page. 2 Push MULTI-CONTROL up or down to select the desired channel category. 3 Push MULTI-CONTROL left or right to select the desired channel in the selected channel category. Displaying the Radio ID Channel number select setting 1 Select the channel select settings to MODE CH NUMBER. Refer to Switching the XM channel select mode on this page. 2 Push MULTI-CONTROL left or right to select RADIO ID. # If you select another channel, display of the ID code is canceled. # Display of the ID code repeats displaying RADIO ID and the ID code one after the other. SIRIUS Satellite Radio tuner Listening to SIRIUS Satellite Radio You can use this unit to control a SIRIUS Satellite Radio tuner, which is sold separately. When the SIRIUS tuner is used together with this unit, some operations differ slightly from those described in the SIRIUS operation manual. This manual provides information on these points. For all other information on using the SIRIUS tuner, please refer to the SIRIUS operation manual. % Selecting a SIRIUS band Band can be selected from SR1, SR2 or SR3. % Selecting a channel Push MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel number continuously. # You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on page 42.) Note It may take a few seconds before you can hear anything while this unit acquires and processes the satellite signal when you change the source to SIRIUS tuner or select a channel. 40 En