Pioneer DEH-P3100UB Owner's Manual - Page 45

Available accessories Section 06 English 3 Press MULTI-CONTROL to determine the selection. # Even if the menu has been cancelled before determination, operation is settled. Switching the reception mode If a digital broadcast reception condition gets poor, this unit automatically switches to the analog broadcast of the same frequency level. If this function is set to on, the tuner switches between digital broadcast and analog broadcast automatically. If this function is off, reception will be conducted within an analog broadcast. 1 Use MULTI-CONTROL to select BLENDING in the function menu. 2 Press MULTI-CONTROL to select your favorite setting. ON-OFF Note If SEEK MODE is set to HD and BLENDING is set to OFF, the tuner can not receive broadcasts. In this case, the seek mode or reception mode is changed automatically as follows: ! When SEEK MODE is set to HD, if you switch BLENDING from ON to OFF, SEEK MODE is changed to ALL. ! When BLENDING is set to OFF, if you switch SEEK MODE from ALL to HD, BLENDING is changed to ON. Multi-CD Player Basic Operations You can use this unit to control a multi-CD player, which is sold separately. ! Only functions described in this manual are supported by 50-disc multi-CD players. % Select a disc Push MULTI-CONTROL up or down. % Fast forward or reverse Push and hold MULTI-CONTROL left or right. % Select a track Push MULTI-CONTROL left or right. Notes ! When multi-CD player completes preparatory operations, READY is displayed. ! If an error message such as ERROR-11 is displayed, refer to the multi-CD player owner's manual. ! If there are no discs in the multi-CD player magazine, NO DISC is displayed. Introduction to advanced operations You can only use COMP/DBE (compression and DBE) with a multi-CD player that supports them. 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option. Press to select. 3 Turn MULTI-CONTROL to select the function. REPEAT (repeat play)-RANDOM (random play)-SCAN (scan play)-PAUSE (pause)- COMP/DBE (compression and DBE)- ITS PLAY (ITS play)-ITS MEMORY (ITS programming) # If you do not operate functions other than ITS MEMORY within about 30 seconds, the display automatically returns to the ordinary display. Function and operation REPEAT, RANDOM, SCAN and PAUSE operations are basically the same as that of the built-in CD player. En 45