Pioneer DEH-P400UB Owner's Manual - Page 35

Available accessories Section 06 English Displaying BD (Bluetooth Device) address 1 Use MULTI-CONTROL to select DEVICE INFO in the function menu. 2 Press MULTI-CONTROL to display the setting mode. 3 Use MULTI-CONTROL to select the desired setting. Turn to change the setting. DEVICE NAME (Device name)-BD ADDRESS (BD (Bluetooth Device) address) Bluetooth Telephone Basic Operations If you use a Bluetooth adapter (e.g. CDBTB200), you can connect a cellular phone featuring Bluetooth wireless technology to this unit for hands-free, wireless calls, even while driving. Important ! Since this unit is on standby to connect with your cellular phone via Bluetooth wireless technology, using this unit without running the engine can result in battery drainage. ! Advanced operations that require your attention such as dialing numbers on the monitor, using phone book, etc., are prohibited while you are driving. When you need to use these advanced operations, stop your vehicle in a safe place. Notes ! Equalizer curve for the phone source is fixed. ! When selecting the phone source, you can only operate FADER/BALANCE (balance adjustment) in the audio menu. Setting up for hands-free phoning Before you can use the hands-free phoning function you must set up the unit for use with your cellular phone. This entails establishing a Bluetooth wireless connection between this unit and your phone, registering your phone with this unit, and adjusting the volume level. 1 Connection For detailed instructions on connecting your phone to this unit via Bluetooth wireless technology, refer to Connecting a cellular phone on page 37. # Your phone should now be temporarily connected. However, to make best use of the technology, we recommend you register the phone to this unit. 2 Registration To register your temporarily connected phone, refer to Registering a connected cellular phone on page 38. 3 Volume adjustment Adjust the earpiece volume on your cellular phone for comfort. When adjusted, the volume level is memorized in this unit as the default setting. # Caller's voice volume and ring volume may vary depending on the type of cellular phone. # If the difference between the ring volume and caller's voice volume is big, overall volume level may become unstable. # Before disconnecting the cellular phone from this unit, make sure to adjust the volume to a proper level. If the volume is muted (zero level) on your cellular phone, the volume level of your cellular phone remains muted even after the cellular phone is disconnected. En 35