Pioneer DEH P4100UB Installation Manual

Installation

English

Installation

English

Note

• Check all connections and systems before final

installation.

• Do not use unauthorized parts. The use of

unauthorized parts may cause malfunctions.

• Consult with your dealer if installation requires

drilling of holes or other modifications of the

vehicle.

• Do not install this unit where:

— it may interfere with operation of the vehicle.

— it may cause injury to a passenger as a result

of a sudden stop.

• The semiconductor laser will be damaged if it

overheats. Install this unit away from hot places

such as near the heater outlet.

• Optimum performance is obtained when the unit

is installed at an angle of less than 60°.

60

°

DIN Front/Rear-mount

This unit can be properly installed either from

“Front” (conventional DIN Front-mount) or

“Rear” (DIN Rear-mount installation, utilizing

threaded screw holes at the sides of unit

chassis). For details, refer to the following

installation methods.

DIN Front-mount

Installation with metal strap and

screws

1. Insert the mounting sleeve into the

dashboard.

• When installing in a shallow space, use a

supplied mounting sleeve. If there is enough

space behind the unit, use factory supplied

mounting sleeve.

2. Secure the mounting sleeve by

using a screwdriver to bend the

metal tabs (90°) into place.

Dashboard

Mounting sleeve

53

182

3. Install the unit.

• Use commercially available parts when

installing.

Screw (M4

8)

Screw

Metal strap

Nut

Filrewall or

metal support

• Make sure that the unit is installed securely

in place. Unstable installation may cause this

unit to malfunction, such as sound skip.

Removing the Unit

1. Extend top and bottom of the trim

ring outwards to remove the trim

ring. When reattaching the trim

ring, push the trim ring onto the

unit until it clicks. (If the trim ring

is attached upside down, the trim

ring will not fit properly.)

• It becomes easy to remove the trim ring if the

front panel is released.

Trim ring

2. Insert the supplied extraction keys

into both sides of the unit until

they click into place.

3. Pull the unit out of the dashboard.

DIN Rear-mount

1.

Extend top and bottom of the trim

ring outwards to remove the trim

ring. When reattaching the trim ring,

push the trim ring onto the unit until

it clicks. (If the trim ring is attached

upside down, the trim ring will not

fit properly.)

• It becomes easy to remove the trim ring if the

front panel is released.

Trim ring

2. Determine the appropriate position

where the holes on the bracket and

the side of the unit match.

3. Tighten two screws on each side.

• Use either truss screws (5 mm × 8 mm)

or flush surface screws (5 mm × 9 mm),

depending on the shape of screw holes in the

bracket.

Dashboard or Console

Factory radio mounting bracket

Screw

Fastening the front panel

If you do not plan to detach the front panel,

the front panel can be fastened with supplied

screw.

Screw

<KNANX>

<08H00000>

Printed in China

Imprimé en Chine

<YRD5262-A/S> UC

Installation Manual

Manuel d’installation

Manual de instalación

CD RECEIVER

AUTORADIO CD

RADIO CD

DEH-P4100UB

Pioneer DEH P4100UB Installation Manual

Pioneer DEH P4100UB - Radio / CD Manual

Pioneer DEH P4100UB manual content summary: