Pioneer DEH-P700BT Owner's Manual - Page 20

Section 02 Operating this unit Entering disc titles Use the disc title input feature to store up to 48 CD titles in the unit. Each title can be up to 10 characters long. 1 Display the function menu. Refer to Introduction to advanced operations on page 18. 2 Play the CD that you want to enter a title for. 3 Use MULTI-CONTROL to select TITLE INPUT in the function menu. 4 Press MULTI-CONTROL to display the title input mode. 5 Push MULTI-CONTROL up or down to select a letter of the alphabet. 6 Press DISP to select the desired character type. Press DISP repeatedly to switch between the following character types: Alphabet-Numbers 7 Push MULTI-CONTROL left or right to move the cursor to the previous or next character position. 8 Move the cursor to the last position by pushing MULTI-CONTROL right after entering the title. When you push MULTI-CONTROL right one more time, the entered title is stored in memory. 9 Press BAND/ESC to return to the playback display. Notes ! Titles remain in memory, even after the disc is removed from the unit, and are recalled when the disc is reinserted. ! After data for 48 discs are stored in the memory, data for a new disc overwrites the oldest one. ! If you connect a multi-CD player, you can input disc titles for up to 100 discs. ! When a multi-CD player that does not support disc title functions is connected, you cannot enter disc titles in this unit. 20 En