Pioneer DEH-P700BT Owner's Manual - Page 42

Introduction of audio, adjustments, Using balance adjustment, Using the equalizer, Audio Adjustments - car

Page 42 highlights

Section 03 Audio Adjustments Introduction of audio adjustments 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select AUDIO. Turn to change the menu option. Press to select. The audio menu is displayed. 3 Turn MULTI-CONTROL to select the audio function. Turn MULTI-CONTROL to switch between the audio functions in the following order. FADER (balance adjustment)-P. EQ (equalizer recall)-EQ (equalizer adjustment)-EQ (equalizer fine adjustment)-LOUDNESS (loudness)-SUB W1 (subwoofer on/off setting)-SUB W2 (subwoofer setting)-HPF (high pass filter)-BASS BOOST (bass boost) -SLA (source level adjustment) # You can select the SUB W2 only when subwoofer output is turned on in SUB W1. # When selecting FM as the source, you cannot switch to SLA. # You can also select the audio function by pressing AUDIO on the remote control. # To return to the display of each source, press BAND/ESC. # If you do not operate functions within about 30 seconds, the display automatically returns to the ordinary display. Using balance adjustment You can change the fader/balance setting so that it can provide the ideal listening environment in all occupied seats. 1 Display the audio menu. Refer to Introduction of audio adjustments on this page. 2 Use MULTI-CONTROL to select FADER. # If the balance setting has been previously adjusted, BALANCE will be displayed. 3 Push MULTI-CONTROL up or down to adjust front/rear speaker balance. Each time MULTI-CONTROL is pushed up or down, the front/rear speaker balance moves towards the front or rear. FADER :F15 to FADER :R15 is displayed as the front/rear speaker balance moves from front to rear. # FADER :F/R 0 is the proper setting when only two speakers are used. # When the rear output setting is SUB W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 47. 4 Push MULTI-CONTROL left or right to adjust left/right speaker balance. Each time MULTI-CONTROL is pushed left or right, the left/right speaker balance moves towards the left or right. BALANCE :L15 to BALANCE :R15 is displayed as the left/right speaker balance moves from left to right. Using the equalizer The equalizer lets you adjust the equalization to match the car's interior acoustic characteristics as desired. Recalling equalizer curves There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves. Display Equalizer curve POWERFUL Powerful NATURAL Natural VOCAL Vocal CUSTOM Custom FLAT Flat SUPER BASS Super bass 42 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77

Introduction of audio
adjustments
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
The audio menu is displayed.
3
Turn MULTI-CONTROL to select the
audio function.
Turn
MULTI-CONTROL
to switch between the
audio functions in the following order.
FADER
(balance adjustment)
P. EQ
(equali-
zer recall)
EQ
(equalizer adjustment)
EQ
(equalizer fine adjustment)
LOUDNESS
(loudness)
SUB W1
(subwoofer on/off set-
ting)
SUB W2
(subwoofer setting)
HPF
(high pass filter)
BASS BOOST
(bass boost)
SLA
(source level adjustment)
#
You can select the
SUB W2
only when sub-
woofer output is turned on in
SUB W1
.
#
When selecting FM as the source, you cannot
switch to
SLA
.
#
You can also select the audio function by
pressing
AUDIO
on the remote control.
#
To return to the display of each source, press
BAND/ESC
.
#
If you do not operate functions within about
30 seconds, the display automatically returns to
the ordinary display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1
Display the audio menu.
Refer to
Introduction of audio adjustments
on
this page.
2
Use MULTI-CONTROL to select FADER.
#
If the balance setting has been previously ad-
justed,
BALANCE
will be displayed.
3
Push MULTI-CONTROL up or down to
adjust front/rear speaker balance.
Each time
MULTI-CONTROL
is pushed up or
down, the front/rear speaker balance moves
towards the front or rear.
FADER :F15
to
FADER :R15
is displayed as the
front/rear speaker balance moves from front to
rear.
#
FADER :F/R 0
is the proper setting when only
two speakers are used.
#
When the rear output setting is
SUB W
, you
cannot adjust front/rear speaker balance. Refer to
Setting the rear output and subwoofer controller
on page 47.
4
Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time
MULTI-CONTROL
is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
BALANCE :L15
to
BALANCE :R15
is displayed
as the left/right speaker balance moves from
left to right.
Using the equalizer
The equalizer lets you adjust the equalization
to match the car
s interior acoustic character-
istics as desired.
Recalling equalizer curves
There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display
Equalizer curve
POWERFUL
Powerful
NATURAL
Natural
VOCAL
Vocal
CUSTOM
Custom
FLAT
Flat
SUPER BASS
Super bass
Audio Adjustments
En
42
Section
03