Pioneer DEH-P700BT Owner's Manual - Page 43
Adjusting loudness, Audio Adjustments
UPC - 012562886213
View all Pioneer DEH-P700BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Audio Adjustments Section 03 Audio Adjustments ! CUSTOM is an adjusted equalizer curve that you create. If you make adjustments to an equalizer curve, the equalizer curve setting is memorized in CUSTOM. ! When FLAT is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve. 1 Use MULTI-CONTROL to select P. EQ. POWERFUL appears in the display. If the equalizer curve has been previously selected, the curve of that previously selected will be displayed instead of POWERFUL. 2 Push MULTI-CONTROL left or right to select an equalizer curve. Each time MULTI-CONTROL is pushed left or right, equalizer curves are selected in the following order: POWERFUL-NATURAL-VOCAL-CUSTOM -FLAT-SUPER BASS Adjusting equalizer curves The factory supplied equalizer curves can be adjusted to a fine degree (nuance control). 1 Recall the equalizer curve you want to adjust. See Recalling equalizer curves on the previous page. 2 Push MULTI-CONTROL left or right to select the equalizer band to adjust. EQ-LOW (low)-EQ-MID (mid)-EQ-HI (high) 3 Push MULTI-CONTROL up or down to adjust the equalizer curve. +6 to -6 is displayed as the equalizer curve is increased or decreased. Fine-adjusting equalizer curve You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ-LOW/EQ-MID/ EQ-HI). Level (dB) Center frequency Q=2N Q=2W Frequency (Hz) 1 Use MULTI-CONTROL to select EQ. 2 Push MULTI-CONTROL left or right to select a desired frequency. Low: 40HZ-80HZ-100HZ-160HZ Mid: 200HZ-500HZ-1KHZ-2KHZ High: 3KHZ-8KHZ-10KHZ-12KHZ 3 Push MULTI-CONTROL up or down to select the desired Q factor. Q factor 2N-1N-1W-2W Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Display the audio menu. Refer to Introduction of audio adjustments on the previous page. 2 Use MULTI-CONTROL to select LOUDNESS. 3 Press MULTI-CONTROL to turn loudness on. Loudness level (e.g., MID) appears in the display. # To turn loudness off, press MULTI-CONTROL again. En 43