Pioneer DEH-P700BT Owner's Manual - Page 47
Switching the auxiliary setting, Setting the rear output and, subwoofer controller, Switching
UPC - 012562886213
View all Pioneer DEH-P700BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Initial Settings Section 04 Initial Settings 3 Press MULTI-CONTROL to turn warning tone on. # To turn warning tone off, press MULTI-CONTROL again. Switching the auxiliary setting Auxiliary devices connected to this unit can be activated individually. Set each AUX source to ON when using. For more information about connecting or using auxiliary devices, refer to Using the AUX source on page 51. 1 Display the initial setting menu. Refer to Adjusting initial settings on the previous page. 2 Use MULTI-CONTROL to select AUX1/ AUX2. 3 Press MULTI-CONTROL to turn AUX1/ AUX2 on. # To turn AUX off, press MULTI-CONTROL again. Setting the rear output and subwoofer controller This unit's rear output (rear speaker leads output) can be used for full-range speaker (FULL) or subwoofer (SUB W) connection. If you switch the rear output setting to SUB W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Initially, the unit is set for rear full-range speaker connection (FULL). 1 Display the initial setting menu. Refer to Adjusting initial settings on the previous page. 2 Use MULTI-CONTROL to select REAR SP. 3 Press MULTI-CONTROL to switch the rear output setting. Pressing MULTI-CONTROL will switch between FULL (full-range speaker) and SUB W (subwoofer) and that status will be displayed. # When no subwoofer is connected to the rear output, select FULL (full-range speaker). # When a subwoofer is connected to the rear output, select SUB W (subwoofer). Notes ! Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Using subwoofer output on page 44). ! If you change this setting, subwoofer output in the audio menu return to the factory settings. Switching the sound muting/attenuation Sound from this system is muted or attenuated automatically when the signal from the equipment with mute function is received. ! The sound is muted or attenuated, MUTE or ATT ON are displayed and no audio adjustment is possible. ! Sound from this system returns to normal when the muting or attenuation is canceled. 1 Display the initial setting menu. Refer to Adjusting initial settings on the previous page. 2 Use MULTI-CONTROL to select TEL. 3 Press MULTI-CONTROL to switch the telephone muting/attenuation. Pressing MULTI-CONTROL will switch between ATT (attenuation) and MUTE (muting) and that status will be displayed. En 47