Pioneer DEH-P80MP Operation Manual - Page 21

Built-in CD Player Section 05 English Introduction of advanced built-in CD player operation ! If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display. 1 1 Function display Shows the function status. 1 Press Multi-Control to display the main menu. FUNCTION and AUDIO appear on the display. 2 Use Multi-Control to select FUNCTION. Turn to change the menu option; press to select. The function name appears on the display. 3 Turn Multi-Control to select the function. Turn Multi-Control clockwise to switch between the functions in the following order: Repeat (repeat play)Random (random play) Scan (scan play)Pause (pause)FF/REV (search method)Tag Read (tag display) COMP/BMX (compression and BMX)disc title input # You can also switch between the functions in the reverse order by turning Multi-Control counterclockwise. # To return to the playback display, press BAND. Notes ! When playing audio data (CD-DA), tag display is not effective even if you turn Tag Read (tag display) on. (Refer to page 28.) Repeating play Repeat play lets you hear the same track over again. 1 Use Multi-Control to select Repeat. Repeat appears in the display. 2 Press Multi-Control to turn repeat play on. Repeat :ON appears in the display. The track currently playing will play to the end and then repeat. # To turn repeat play off, press Multi-Control again. Note If you perform track search or fast forward/reverse, repeat play is automatically cancelled. Playing tracks in a random order Random play lets you play back tracks on the CD in a random order. 1 Use Multi-Control to select Random. Random appears in the display. 2 Press Multi-Control to turn random play on. Random :ON appears in the display. Tracks will play in a random order. # To turn random play off, press Multi-Control again. En 21