Pioneer DEH-P80MP Operation Manual - Page 48
Setting the sound focus, equalizer SFEQ, Using balance adjustment, Audio Adjustments
View all Pioneer DEH-P80MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Section 11 Audio Adjustments Setting the sound focus equalizer (SFEQ) Clarifying the sound image of vocals and instruments allows the simple staging of a natural, pleasant sound environment. Even greater listening enjoyment will be obtained if seating positions are chosen carefully. FRT1 boosts the treble on the front output and the bass on the rear output. FRT2 boosts the treble and the bass on the front output and the bass on the rear output. (The bass boost is the same for both front and rear.) For both FRT1 and FRT2, H setting provides a more pronounced effect than L setting. 1 Press EQ-EX and hold to switch to SFEQ function. Press EQ-EX and hold until SFEQ indicator appears in the display. # To switch to EQ-EX function, press EQ-EX and hold. 2 Press EQ-EX to select the desired SFEQ setting. Press EQ-EX repeatedly to switch between the following settings: FRT1-H (front 1-high)FRT1-L (front 1-low) FRT2-H (front 2-high)FRT2-L (front 2-low) CUSTOM (custom)SFEQ OFF (off) 3 Push Multi-Control left or right to select the desired position. Push Multi-Control left or right until the desired position appears in the display. LEFT (left)CENTER (center)RIGHT (right) Notes ! If you adjust the bass or treble, CUSTOM memorizes an SFEQ setting in which the bass and treble are adjusted for personal preference. ! If you switch the SFEQ setting, the HPF function is automatically turned off. By turning the HPF function on after selecting the SFEQ setting, you can combine HPF function with SFEQ function. Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Use Multi-Control to select Fad. Fad appears in the display. # If the balance setting has been previously adjusted, Bal will be displayed. 2 Push Multi-Control up or down to adjust front/rear speaker balance. Each pushing Multi-Control up or down moves the front/rear speaker balance towards the front or the rear. Fad F 15 Fad R 15 is displayed as the front/ rear speaker balance moves from front to rear. # Fad F/R 0 is the proper setting when only two speakers are used. # When the rear output setting is REAR SP :S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 55. 3 Push Multi-Control left or right to adjust left/right speaker balance. Each pushing Multi-Control left or right moves the left/right speaker balance towards the left or the right. Bal L 9 Bal R 9 is displayed as the left/right speaker balance moves from left to right. 48 En