Pioneer DEH-X5600HD Owner's Manual - Page 6
CD/CD-R/CD-RW and USB, storage devices, Using this unit - no sound
View all Pioneer DEH-X5600HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Section 02 Using this unit Using this unit Function settings 1 Press M.C. to display the main menu. 2 Turn M.C. to change the menu option and press to select FUNCTION. 3 Turn M.C. to select the function. Once selected, the following functions can be adjusted. BSM (best stations memory) BSM (best stations memory) automatically stores the six strongest stations in the order of their signal strength. 1 Press M.C. to turn BSM on. To cancel, press M.C. again. LOCAL (local seek tuning) Local seek tuning allows you to tune in to only those radio stations with sufficiently strong signals for good reception. 1 Press M.C. to select the desired setting. FM: OFF-LV1-LV2-LV3-LV4 AM: OFF-LV1-LV2 The highest level setting allows reception of only the strongest stations, while lower levels allow the reception of weaker stations. HD SEEK (seek mode) Seek tuning setting can be changed between digital station seek (ON) and all station seek (OFF) depending on the reception status. 1 Press M.C. to select your favorite setting. OFF-ON BLEND (reception mode) If a digital broadcast reception condition gets poor, this unit automatically switches to the analog broadcast of the same frequency level. If this function is set to on, the tuner switches between digital broadcast and analog broadcast automatically. If this function is off, reception will be conducted within an analog broadcast. 1 Press M.C. to turn this function on or off. Note If HD SEEK is set to ON and BLEND is set to off, the tuner cannot receive broadcasts. In this case, the seek mode or reception mode is changed automatically as follows: ! When HD SEEK is set to ON, if you switch BLEND from on to off, HD SEEK is changed to OFF. ! When BLEND is set to off, if you switch HD SEEK from OFF to ON, BLEND is changed to on. CD/CD-R/CD-RW and USB storage devices MTP connection MTP-compatible Android devices (running Android OS 4.0 or higher) can be connected by MTP connection using the USB source. To connect an Android device, use the cable that came with the device. Notes ! This function is not compatible with MIX- TRAX. ! This function is not compatible with WAV. Basic operations Playing a CD/CD-R/CD-RW 1 Insert the disc into the disc loading slot with the label side up. Ejecting a CD/CD-R/CD-RW 1 Press h. Playing songs on a USB storage device 1 Open the USB port cover. 2 Plug in the USB storage device using a USB cable. Stopping playback of files on a USB storage device 1 You may disconnect the USB storage device at any time. Selecting a folder 1 Press 1/ or 2/ . Selecting a track 1 Press c or d. Fast forwarding or reversing 1 Press and hold c or d. ! When playing compressed audio, there is no sound during fast forward or reverse. Returning to root folder 1 Press and hold BAND/ . Switching between compressed audio and CD-DA 1 Press BAND/ . Switching between playback memory devices You can switch between playback memory devices on USB storage devices with more than one Mass Storage Device-compatible memory device. 1 Press BAND/ . ! You can switch between up to 32 different memory devices. Note Disconnect USB storage devices from the unit when not in use. Operations using the MIXTRAX button Turning MIXTRAX on or off You can use this function when USB is selected as the source. You cannot use this function with USB MTP. 1 Press MIX to turn MIXTRAX on or off. ! For more details about MIXTRAX, refer to About MIXTRAX on page 12. ! When MIXTRAX is in use, the sound retriever function is disabled. Switching the display Selecting the desired text information 1 Press DISP to cycle between the following: CD-DA ! ELAPSED TIME (track number and play- back time) ! CLOCK (source name and clock) ! SPEANA (spectrum analyzer) CD-TEXT ! TRACK INFO (track title/track artist/disc title) ! ELAPSED TIME (track number and play- back time) ! CLOCK (source name and clock) ! SPEANA (spectrum analyzer) MP3/WMA/WAV ! TRACK INFO (track title/artist name/album title) ! FILE INFO (file name/folder name) ! ELAPSED TIME (track number and play- back time) ! CLOCK (source name and clock) ! SPEANA (spectrum analyzer) 6 En