Pioneer DVR 117D Drive Installation Information Sheet
Pioneer DVR 117D - DVD±RW Drive - IDE Manual
 |
View all Pioneer DVR 117D manuals
Add to My Manuals
Save this manual to your list of manuals |
Pioneer DVR 117D manual content summary:
- Pioneer DVR 117D | Drive Installation Information Sheet - Page 1
as shown on the left or a desktop model as shown below. This drive works in either PC model style. Step 2 - Prepare the Drive 3) Attach slide to the drive. Pay close attention to the polarity of the cable. 6) Connect the IDE cable to the drive. Confirm that Pin 1 on the drive corresponds to Pin 1 - Pioneer DVR 117D | Drive Installation Information Sheet - Page 2
Select Setting the Jumper For Use in a Cable-Select PC Some computers support a data exchange method called Cable Select. If your PC uses Cable IDE cable must be designed for Cable Select communication. Simply position the jumper for Cable Select and install the drive according to the instructions
-
1 -
2
 |
 |
D
RIVE
I
NSTALLATION
I
N
A
N
I
NSTANT
Step 1 – Prepare the Computer
1)
Turn OFF the computer and disconnect the power cord.
2)
Remove the bezel and the open drive bay cover from the computer’s front panel.
Note: Your computer may be a tower
model as shown on the left or a
desktop model as shown below.
This
drive works in either PC model style.
Step 2 – Prepare the Drive
3)
Attach slide rails to the drive if required for your drive model.
Slide rails are sold separately through computer retailers.
4)
Position the drive close to the open computer bay.
Horizontal Installation
Vertical Installation
Step 3 – Connect the Cables
5)
Connect the power cable from the computer to the drive.
Pay close attention to the polarity of the cable.
6) Connect the IDE cable to the drive.
C
onfirm that Pin 1 on the drive corresponds to Pin 1 on the cable.
7)
Connect the drive’s audio output to the sound card if one is present.