Pioneer FH-P8000BT Other Manual - Page 2

Connecting the unit English Connecting the unit English When not connecting a rear speaker lead to a subwoofer Front output Rear output Subwoofer output Antenna jack This product IP-BUS input (Blue) Multi-CD player (sold separately) IP-BUS cable Fuse (10 A) Yellow/black If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections. Yellow Connect to the constant 12 V supply terminal. Red Connect to terminal controlled by ignition switch (12 V DC). Microphone input Microphone 14 cm (5-1/2 in.) AUX jack (3.5 ø) Use a stereo mini plug cable to connect with auxiliary device. 4 m (13 ft. 1n.) To rear output Wired remote input Hard-wired remote control adaptor can be connected (sold separately). USB cable Connect to separately sold USB device. To front output To subwoofer output Connect with RCA cables (sold separately) Power amp (sold separately) Power amp (sold separately) Power amp (sold separately) 1.5 m (4 ft. 11 in.) System remote control Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). Orange/white Connect to lighting switch terminal. Perform these connections when using the optional amplifier. Black (chassis ground) Connect to a clean, paint-free metal location. Front speaker Left Rear speaker White White/black Green Green/black With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. Gray Gray/black Violet Violet/black Front speaker Right Rear speaker Subwoofer Front speaker Rear speaker Subwoofer Front speaker Rear speaker Connecting the unit English Connecting the unit When using a subwoofer without using the optional amplifier Front output Rear output Subwoofer output This product Microphone input Microphone 14 cm (5-1/2 in.) 4 m (13 ft. 1n.) Antenna jack AUX jack (3.5 ø) Use a stereo mini plug cable to connect with auxiliary device. IP-BUS input (Blue) Multi-CD player (sold separately) IP-BUS cable Fuse (10 A) Wired remote input Hard-wired remote control adaptor can be connected (sold separately). 1.5 m (4 ft. 11 in.) USB cable Connect to separately sold USB device. English Yellow/black If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections. Yellow Connect to the constant 12 V supply terminal. Red Connect to terminal controlled by ignition switch (12 V DC). Orange/white Connect to lighting switch terminal. Black (chassis ground) Connect to a clean, paint-free metal location. Note: Change the initial setting of this unit (refer to the Operation Manual). The subwoofer output of this unit is monaural. Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). Front speaker Left Subwoofer (4 Ω) White White/black Green Green/black Gray Gray/black Violet Violet/black Front speaker Right Subwoofer (4 Ω) When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not connect anything with Green and Green/black leads. Green Not used. Green/black Violet Violet/black Subwoofer (4 Ω) × 2