Pioneer GM-ME600X6 Owners Manual

Pioneer GM-ME600X6 Manual

Pioneer GM-ME600X6 manual content summary:

  • Pioneer GM-ME600X6 | Owners Manual - Page 1
    and used in accordance with the instructions, may cause harmful interference to radio Name: PIONEER ELECTRONICS (USA) INC. SERVICE SUPPORT DIVISION Address: 2050 W. 190TH STREET, Register your product.  Access owner's manuals, spare parts infor- mation, service information, and much more. En The
  • Pioneer GM-ME600X6 | Owners Manual - Page 2
    out periodically. In such cases, please contact an authorized Pioneer Service Company. Gain volume of this unit 0.5 V (Maximum Speaker output terminals En Please see the following section for speaker connection instructions. Refer to Connections when using the speaker input wire. f System remote
  • Pioneer GM-ME600X6 | Owners Manual - Page 3
    Speaker setting and I/O Corresponding I/O for the number of input channels Input: Two-channel / Output: Six-channel  Slide INPUT SELECT switch to 2CH position and connect wires with RCA pin plugs (sold sepa- rately) to CH-A. INPUT OUTPUT CH-A (L) CH1 CH1 (L) CH-A (R) CH2 CH2 (R) CH-B
  • Pioneer GM-ME600X6 | Owners Manual - Page 4
     Install tapping screws in such a way that the screw tip does not touch any wire. This is important to prevent wires from being cut by vibration of the boat, which can result in fire.  Make sure that wires do not get caught in the sliding mechanism or touch the legs of a person in the boat as
  • Pioneer GM-ME600X6 | Owners Manual - Page 5
    endroit sûr et facilement accessible pour toute consultation ultérieure. Service après-vente des produits Pioneer Veuillez contacter le revendeur Pioneer agr refusés. ÉTATS-UNIS ET CANADA Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA 90801-1760 États-Unis 800
  • Pioneer GM-ME600X6 | Owners Manual - Page 6
    ée RCA A c Jack d'entrée RCA B d Jack d'entrée RCA C e Bornes de sortie des haut-parleurs Veuillez vous reporter à la section suivante pour les instructions de connexion des hautparleurs. Reportez-vous à Connexions lors de l'utilisation du fil d'entrée des haut-parleurs. f Fil de la télécommande du
  • Pioneer GM-ME600X6 | Owners Manual - Page 7
    Réglage et puissance de sortie des haut-parleurs SPEAKER SETTING MONO 2CH 2 W - 100 W NOR 4 W 150 W 75 W 2 W - 100 W HIGH 4 W 200 W 100 W Connexions lors de l'utilisation du fil d'entrée des haut-parleurs Connectez les fils de sortie des haut-parleurs de l'appareil central à l'
  • Pioneer GM-ME600X6 | Owners Manual - Page 8
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

En
Before you start
En
Owner’s Manual
Mode d’emploi
MARINE 6-CHANNEL AMPLIFIER
AMPLIFICATEUR 6 CANAUX MARIN
GM-ME600X6
English
Français
<A1-000036-9L-A> UC
<KNZZ20G>
Thank you
for purchasing this PIONEER
product
To ensure proper use, please read through this
manual before using this product. It is espe-
cially important that you read and observe
WARNINGS
and
CAUTIONS
in this manual.
Please keep the manual in a safe and accessi-
ble place for future reference.
Information to User
Alteration or modifications carried out without
appropriate authorization may invalidate the
user’s right to operate the equipment.
Note
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reason-
able protection against harmful interference
in a residential installation. This equipment
generates, uses and can radiate radio fre-
quency energy and, if not installed and used
in accordance with the instructions, may
cause harmful interference to radio commu-
nications. However, there is no guarantee
that interference will not occur in a particu-
lar installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an out-
let on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
FEDERAL COMMUNICATIONS
COMMISSION SUPPLIER’S DECLARATION
OF CONFORMITY
Product Name: Marine 6-channel Amplifier
Model Number: GM-ME600X6
Responsible Party Name: PIONEER
ELECTRONICS (USA) INC.
SERVICE SUPPORT DIVISION
Address: 2050 W. 190TH STREET, SUITE 100,
TORRANCE, CA 90504, U.S.A.
Phone: 1-800-421-1404
URL:
After-sales service for
Pioneer products
Please contact the authorized Pioneer dealer
from which you purchased this unit or an
authorized Pioneer service company for after-
sales service or questions you may have about
the product. You may contact Pioneer directly
as follows:
Do not ship your unit in for repair
without contacting Pioneer first.
Units sent without a return authoriza-
tion number will be refused.
USA & CANADA
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760 U.S.A.
800-421-1404
For warranty information, please see the
Limited Warranty sheet included with this unit.
Visit our website
U.S.:
Canada:
Learn about product updates (such as
firmware updates) for your product.
Register your product.
Access owner’s manuals, spare parts infor-
mation, service information, and much more.
The Safety of Your Ears is in
Your Hands
Get the most out of your equipment by playing
it at a safe level—a level that lets the sound
come through clearly without annoying blar-
ing or distortion and, most importantly, with-
out affecting your sensitive hearing. Sound
can be deceiving. Over time, your hearing
“comfort level” adapts to higher volumes of
sound, so what sounds “normal” can actually
be loud and harmful to your hearing. Guard
against this by setting your equipment at a
safe level BEFORE your hearing adapts.
ESTABLISH A SAFE LEVEL:
Set your volume control at a low setting.
Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Once you have established a comfortable
sound level, set the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING
GUIDELINES:
Do not turn up the volume so high that you
can’t hear what’s around you.
Use caution or temporarily discontinue use
in potentially hazardous situations.
Do not use headphones while operating a
boat; the use of headphones may create a
traffic hazard and is illegal in many areas.
Before connecting/installing
the amplifier
WARNING
To prevent fire hazard, the heatsink should never
be covered (such as by paper, material, etc.).
This unit is for boats with a 12 V battery and
negative grounding. Before installing, check
the battery voltage.
When installing this unit, make sure to con-
nect the ground wire first. Ensure that the
ground wire is properly connected to the neg-
ative ground circuit of the boat.
Use adequate
gauge, marine grade electrical wire that has
been properly terminated for marine use to
make a direct connection to the negative bus
bar or negative ground distribution system.
Do not attempt to ground the amplifier using
the mounting screws.
Use fused marine grade battery wire (sold
separately) of adequate gauge that has been
properly terminated for marine use to make
a direct connection to the positive bus bar or
positive distribution system.
If the screw for the ground wire loos-
ens or falls out, it could result in fire,
smoke or malfunction.
Always use a fuse of the rating prescribed.
The use of an improper fuse could result in
overheating and smoke, damage to the prod-
uct, and injury, including burns.
Check all electrical and signal connections
(power, ground, amplifier, speaker, etc.) if
amplifier fuse or battery wire fuse blows.
Resolve any loose or short circuited connec-
tions, then replace the blown fuse with an
identical value equivalent.
Always install the amplifier on an even sur-
face. Do not install the amplifier on a surface
that is uneven or has a protrusion. Doing so
could result in malfunction.
When installing the amplifier, do not allow
parts such as extra screws to get caught
between the amplifier and the boat. Doing so
could cause malfunction.
Do not allow this unit to come into
contact with liquids. Electrical shock
could result. Also, damage to this unit,
smoke, and overheating could result
from contact with liquids. The surfaces
of the amplifier and any attached
speakers may also heat up and cause
burns.
In the event of any abnormality, the power
supply to the amplifier may cut off to prevent
equipment malfunction. If this occurs, switch
the system power off and check all electrical
and signal connections (power, ground, ampli-
fier, speaker, etc.) for loose or short circuited
connections. If you are unable to determine
the cause, please contact your dealer.
Always disconnect the negative
*
terminal
of the battery before making any electrical or
signal connections to avoid the risk of electric
shock or short circuit during installation.
Do not attempt to disassemble or modify
this unit. Doing so may result in fire, electric
shock or other malfunction. Damage or
defects resulting from alterations or modifica-
tions not authorized in writing by Pioneer are
excluded from limited warranty coverage.
This amplifier is designed for marine use but is
not waterproof. Do not install it in places that
are prone to getting wet. When the amplifier
is not used, attach a cover or cap to prevent
water entering inside or the terminals getting
wet when they come into contact with water.
Do not install the amplifier in a location
exposed to direct sunlight or excessive heat,
humidity or dust.
PIONEER CORPORATION
28-8, Honkomagome 2-chome, Bunkyo-ku,
Tokyo 113-0021, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
2 Jalan Kilang Barat, #07-01, Singapore 159346
TEL: 65-6378-7888
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
5 Arco Lane, Heatherton, Victoria, 3202 Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MÉXICO S.A. DE C.V.
Blvd.Manuel Ávila Camacho 138, 10 piso
Col.Lomas de Chapultepec, México, D.F. 11000
TEL: 52-55-9178-4270
FAX: 52-55-5202-3714
© 2020 PIONEER CORPORATION.