Pioneer SC-27 Owner's Manual - Page 91

Switching the speaker system, Using the MULTI-ZONE controls, Switches the MULTI-ZONE

Page 91 highlights

Using other functions 09 Switching the speaker system If you selected Speaker B in Surround back speaker setting on page 124, three speaker system settings are possible using SPEAKERS. If you selected Normal, Front Bi-Amp or ZONE 2, the button will simply switch your main speaker system on or off. The options below are for the Speaker B setting only.1 AUDIO PARAMETER (TUNE) VIDEO CONTROL ON/OFF (PRESET) ENTER (TUNE) HOME MENU (PRESET) TUNER EDIT BAND AUTO SURR/ALC/ HOME STANDARD ADVANCED STEREO STREAM DIRECT THX SURROUND SURROUND RETURN HDMI 4 VIDEO CAMERA iPod iPhone USB MULTI-ZONE SPEAKERS MCACC SETUP MIC PHONES Using the MULTI-ZONE controls The following steps use the front panel controls to adjust the sub zone volume and select sources. See MULTIZONE remote controls on page 92. INPUT SELECTOR  STANDBY/ON PHASE CONTROL ADVANCED MCACC PQLS HDMI MASTER VOLUME • Use SPEAKERS on the front panel to select a speaker system setting. As mentioned above, if you have selected Normal, the button will simply switch your main speaker system (A) on or off. Press repeatedly to choose a speaker system option: • SPA - Sound is output from speaker system A and the same signal is output from the pre-out terminals. • SPB - Sound is output from the two speakers connected to speaker system B. Multichannel sources will not be heard. The same signal is output from the surround back channel pre-out terminals. • SPAB - Sound is output from speaker system A (up to 5 channels, depending on the source), the two speakers in speaker system B, and the subwoofer. The sound from speaker system B will be the same as the sound from speaker system A (multichannel sources will be downmixed to 2 channels). • SP (off) - No sound is output from the speakers. The same sound is output from the pre-out terminals (including from your subwoofer, if connected) as when selecting speaker system A (above). AUDIO PARAMETER (TUNE) VIDEO CONTROL ON/OFF (PRESET) ENTER (TUNE) HOME MENU (PRESET) TUNER EDIT BAND AUTO SURR/ALC/ HOME STANDARD ADVANCED STEREO STREAM DIRECT THX SURROUND SURROUND RETURN HDMI 4 VIDEO CAMERA iPod iPhone USB MULTI-ZONE SPEAKERS MCACC SETUP MIC PHONES 1 Press MULTI-ZONE ON/OFF on the front panel. Each press selects a MULTI-ZONE option: • ZONE 2 ON - Selects your primary (ZONE 2) sub zone • ZONE 2&3 ON - Select both sub zones • ZONE 3 ON - Selects your secondary (ZONE 3) sub zone • MULTI ZONE OFF - Switches the MULTI-ZONE feature off The MULTI-ZONE indicator lights when the MULTI-ZONE control has been switched ON. 2 Press MULTI-ZONE CONTROL on the front panel to select the sub zone(s) you want. If you selected ZONE 2&3 ON above, you can toggle between ZONE 2 and ZONE 3. • When the receiver is on,2 make sure that any operations for the sub zone are done while ZONE and your selected sub zone(s) show in the display. If this is not showing, the front panel controls affect the main zone only. 3 Use the INPUT SELECTOR dial to select the source for the zone you have selected. For example, ZONE 2 CD-R sends the source connected to the CD-R inputs to the primary (ZONE 2) sub room. • If you select TUNER, you can use the tuner controls to select a preset station (see Saving station presets on page 56 if you're unsure how to do this).3 Note 1 • The subwoofer output depends on the settings you made in Manual speaker setup on page 124. However, if SPB is selected above, no sound is heard from the subwoofer (the LFE channel is not downmixed). • Depending on the settings in Surround back speaker setting on page 124 output from the surround back pre-out terminals may change. • All speaker systems (except Speaker B connections) are switched off when headphones are connected. 2 If the receiver is in standby, the display is dimmed, and ZONE and your selected sub zone(s) continue to show in the display. 3 The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also changes the station in the other zone. Please be careful not to change stations when recording a radio broadcast. 91 en

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154

Using other functions
09
91
en
Switching the speaker system
If you selected
Speaker B
in
Surround back speaker
setting
on page 124, three speaker system settings are
possible using
SPEAKERS
. If you selected
Normal
,
Front
Bi-Amp
or
ZONE 2
, the button will simply switch your
main speaker system on or off. The options below are for
the
Speaker B
setting only.
1
Use
SPEAKERS
on the front panel to select a
speaker system setting.
As mentioned above, if you have selected
Normal
, the
button will simply switch your main speaker system (A)
on or off.
Press repeatedly to choose a speaker system option:
SP
A
– Sound is output from speaker system A and
the same signal is output from the pre-out terminals.
SP
B
– Sound is output from the two speakers
connected to speaker system B. Multichannel
sources will not be heard. The same signal is output
from the surround back channel pre-out terminals.
SP
AB
– Sound is output from speaker system A (up
to 5 channels, depending on the source), the two
speakers in speaker system B, and the subwoofer.
The sound from speaker system B will be the same as
the sound from speaker system A (multichannel
sources will be downmixed to 2 channels).
SP
(off) – No sound is output from the speakers. The
same sound is output from the pre-out terminals
(including from your subwoofer, if connected) as
when selecting speaker system A (above).
Using the MULTI-ZONE controls
The following steps use the front panel controls to adjust
the sub zone volume and select sources. See
MULTI-
ZONE remote controls
on page 92.
1
Press
MULTI-ZONE ON/OFF
on the front panel.
Each press selects a MULTI-ZONE option:
ZONE 2 ON
– Selects your primary (
ZONE 2
) sub
zone
ZONE 2&3 ON
– Select both sub zones
ZONE 3 ON
– Selects your secondary (
ZONE 3
) sub
zone
MULTI ZONE OFF
– Switches the MULTI-ZONE
feature off
The
MULTI-ZONE
indicator lights when the MULTI-ZONE
control has been switched ON.
2
Press
MULTI-ZONE CONTROL
on the front panel to
select the sub zone(s) you want.
If you selected
ZONE 2&3 ON
above, you can toggle
between
ZONE 2
and
ZONE 3
.
When the receiver is on,
2
make sure that any
operations for the sub zone are done while
ZONE
and
your selected sub zone(s) show in the display. If this
is not showing, the front panel controls affect the
main zone only.
3
Use the
INPUT SELECTOR
dial to select the source
for the zone you have selected.
For example,
ZONE 2 CD-R
sends the source connected
to the
CD-R
inputs to the primary (
ZONE 2
) sub room.
If you select
TUNER
, you can use the tuner
controls
to select a preset station (see
Saving station presets
on page 56 if you’re unsure how to do this).
3
Note
1
• The subwoofer output depends on the settings you made in
Manual speaker setup
on page 124. However, if
SP
B
is selected above, no sound
is heard from the subwoofer (the LFE channel is not downmixed).
• Depending on the settings in
Surround back speaker setting
on page 124 output from the surround back pre-out terminals may change.
• All speaker systems (except
Speaker B
connections) are switched off when headphones are connected.
PHONES
SPEAKERS
CONTROL
MULTI-ZONE
ON/OFF
MCACC
SETUP MIC
PARAMETER
ENTER
(TUNE)
(TUNE)
(PRESET)
(PRESET)
AUDIO
VIDEO
TUNER EDIT
USB
HDMI 4
VIDEO CAMERA
iPod
iPhone
AUTO SURR/ALC/
STREAM DIRECT
HOME
THX
STANDARD
SURROUND
ADVANCED
SURROUND
STEREO
BAND
HOME MENU
RETURN
2 If the receiver is in standby, the display is dimmed, and
ZONE
and your selected sub zone(s) continue to show in the display.
3
The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also changes the station in the other
zone. Please be careful not to change stations when recording a radio broadcast.
STANDBY/ON
INPUT
SELECTOR
PHASE
CONTROL
ADVANCED
MCACC
PQLS
HDMI
MASTER
VOLUME
PHONES
SPEAKERS
CONTROL
MULTI-ZONE
ON/OFF
MCACC
SETUP MIC
PARAMETER
ENTER
(TUNE)
(TUNE)
(PRESET)
(PRESET)
AUDIO
VIDEO
TUNER EDIT
USB
HDMI 4
VIDEO CAMERA
iPod
iPhone
AUTO SURR/ALC/
STREAM DIRECT
HOME
THX
STANDARD
SURROUND
ADVANCED
SURROUND
STEREO
BAND
HOME MENU
RETURN